P OWER TRANS FOR MER CHASSIS MOUNT : Isolation N-55MG Electrical Specifications (@25°C) 1. Maximum Power: 250 VA 2. Input Voltage: 115 V, 50 / 60 Hz 3. Output Voltage: 115V + 5% 4. Full Secondary Load: 2.17 Amps RMS 5. Voltage Regulation: 5 % TYP @ full load to no load Description: The N-55MG is power transformer for isolating equipment from direct connection to the power line. It is constructed with nonconcentrically wound coils. The primary and secondary are wound on separate arbors, then assembled on a laminate core side-by-side separated by insulation. This prevents electrical connection under normal or overload conditions between the primary and secondary windings. Safety: These units are designed with 1500V isolation between winding to winding and between winding and core. Materials and construction are rated for Class B insulation system. Dimensions: B Unit: In inches A B C D E 4.625 3.937 5.00 3.00 3.812 A Weight: 11.0 lbs Mounting Holes: .375 x .187 Connections: 6 ft. long cord, 5-15P NEMA Plug, 5-15R NEMA Receptacle C Schematic: D BLK 115 V 50/60 Hz PF SF BLK WHT WHT PS GRN 115 V E SS GRN RoHS Compliance: As of manufacturing date February 2005, all standard products meet the requirements of 2011/65/EU, known as the RoHS initiative. * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 Publish Date: December 4, 2013