Product Brief TLI4970 – Current Sensor Family Miniature Magnetic Digital Current Sensor ±50A (AC/DC), up to ±1%, Digital SPI Interface The TLI4970 is a highly accurate current sensor based on Infineon’s well established Hall technology. The coreless concept allows significant miniaturization compared to existing products. It is a fully digital solution, easy to use, no need for external calibration. Additionally a separate interface pin (OCD) provides a fast output signal in case the current measured by the sensor exceeds a pre-defined threshold. The small QFN‑like package allows standard SMD assembly. Product Highlights AC & DC measurement range up to ±50A Highly accurate over temperature range and lifetime (max. 1.0% (0 h), 1.6% (over lifetime) of indicated value) Low offset error (max. 75mA over temperature and lifetime) High magnetic stray field suppression Fast over current detection with configurable threshold Galvanic isolation up to 2.5kV max. rated isolation voltage (UL1577) 16-bit digital SPI output (13-bit current value) Small 7.0 x 7.0 mm SMD package The TLI4970 provides superior accuracy compared to existing open or closed loop systems with magnetic cores. It has additional functionality such as over current detection, zero crossing detection and programmable filters, but offers a significantly smaller footprint and power consumption. Applications The TLI4970 is suitable for AC and DC current measurement applications like photovoltaicand general purpose inverters, Power Supplies (SMPS), battery chargers, lighting applications, electrical drives, and many more. With its implemented magnetic interference suppression, it is extremely robust when exposed to external magnetic fields. It is also suitable for fast over current detection with a configurable threshold level. This allows the control unit to switch off and protect the affected system from damage, independently of the main measurement path. www.infineon.com/current-sensor Sensor Features Galvanic isolated, measurement principle Coreless solution, hysteresis free Inherent suppression of stray magnetic field 13-bit current resolution Update rate: 80kSPS Galvanic isolation up to 2.5kV Adjustable LP filter (≤ 18kHz) Fast over current detection (typ. 1.8µs) with configurable threshold levels Suitable for industrial and consumer applications Plug and play solution – no external calibration needed Long-term stability of output signal Digital Interface 3 wire SPI Digital OCD pin Package Leadless package (QFN-like) PG-TISON-8 Size in mm: 7.0 x 7.0 x 1.0 (L, W, H) Weight: 0.2g SMD mounting Product Brief TLI4970 – Current Sensor Family Miniature Magnetic Digital Current Sensor ±50A (AC/DC), up to ±1%, Digital SPI Interface Block Diagram TLI4970 IP+ Supply, Biasing, Reset, Oscillator, Bandgap VDD GND EEPROM Diff. Hall Galvanic Separation ADC CS T S MUX DSP ADC Digital IF SCLK DOUT DAC OCD Fast Overcurrent Detection (open-drain) IP- Product Summary Product Name Description Primary Current Range Max. Accuracy Error1) Order Code TLI4970-D050T4 Qualified according to industrial standards: For use in industrial and consumer applications 50A ±1.6 SP000917088 50A ±3.5 SP001323146 25A ±1.6 SP001323154 25A ±3.5 SP001323150 50A ±1.6 On request 25A ±1.6 On request TLI4970-D050T5 TLI4970-D025T4 TLI4970-D025T5 TLE4970-D050T4 Qualified according AEC for automotive applications TLE4970-D025T4 1) Accuracy error includes temperature and lifetime drifts Published by Infineon Technologies AG 85579 Neubiberg, Germany © 2015 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B142-I0071-V1-7600-EU-EC-P Date: 07 / 2015 Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.