CURRENT 2.0 Amperes VOLTAGE 50 to 1000 Volts S2A THRU S2M Features · For surface mounted applications · Glass passivated junction · Low profile package · Builtoin strain relief, ideal for automated placement · Plastic package has Unerwrites Laboratory Flammability Classification 94V-0 · High temperature soldering guaranteed: 350℃/10 second, at terminals DO-214AA (SMB) 0.155(3.94) 0.130(3.30) 0.083(2.11) 0.075(1.91) 0.185(4.70) 0.160(4.06) 0.012(0.31) 0.006(0.15) Mechanical Data 0.096(2.44) 0.083(2.13) · Case : JEDEC SMB(DO-214AA) molded plastic body · Terminals : Plated axial lead solderable per MIL-STD-750, method 2026 · Polarity : Color band denotes cathode end · Mounting Position : Any · Weight : 0.003 ounce, 0.093 gram 0.008(0.203) MAX. 0.050(1.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols S2A S2B S2D S2G S2J S2K S2M Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current at TL=100℃ I(AV) 2.0 Amps Peak forward surge current 8.3ms half sing wave superimposed on rated load (JEDEC method) TL=100℃ IFSM 50.0 Amps Maximum instantaneous forward voltage at 2.0A VF 1.15 Volts Maximum reverse current at rated voltage TA=25℃ TA=125℃ Typical thermal resistance (Note 2) Typical reverse capacitance (Note 3) Typical junction capacitance (Note 1) Operating and Storage temperature Range IR RθJL RθJA 1.0 125 μA 16.0 53.0 ℃/W trr 2.0 μS CJ TJ TSTG 30.0 pF -55 to +150 Notes: (1) Measured at 1MHz and applied reverse voltage of 4.0V dc. (2) Thermal resistance from junction to ambient and from junction to lead mounted on 0.2×0.2"(0.5×0.5mm) copper opad areas. (3) Reverse recovery test conditions:IF=0.5A, IR=1.0A, Irr=0.25A ℃ RATINGS AND CHARACTERISTIC CURVES S2A THRU S2M FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.5 10 1.0 60Hz RESISTIVE OR INDUCTIVE LOAD 0.27X0.27"(7.0X7.0MM) COPPER PAD AREAS 0.5 0 50 60 70 80 90 100 110 120 130 140 150 LEAD TEMPERATURE (℃) INSTANTANEOUS FORWARD CURRENT (AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 1 TJ=25℃ PULSE WIDTH=300mS 1% DUTY CYCLE 0.1 0.01 0.4 FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 50 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 30 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 10 10 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 100 TJ=25℃ f=1.0MHz Vsig=50mVp-p INSTANTANEOUS REVERSE CURRENT (mA) PEAK FORWARD SURGE CURRENT (AMPERES) TJ=100℃ 40 TJ=125℃ 1.0 0.1 TJ=100℃ 0.01 TJ=25℃ 0.001 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 1 0.01 0.1 1 10 REVERSE VOLTAGE. VOLTS 100 100