Download

Sensors
PRODUCT SELECTOR GUIDE
Sensors
Fully-calibrated, low-power
intelligent sensing solutions
www.silabs.com/sensors | Smart. Connected. Energy-Friendly.
High precision optical sensor family senses UV
Index, ambient light, long range proximity, heart rate/
pulse oximetry and motion with 2D or 3D gestures.
Si1132 Ultraviolet (UV) Index and Ambient Light Sensor
The monolithic Si1132 sensor integrates multiple photodiodes, an analog-to-digital
converter, a signal processor and a digital I2C control interface. This UV Index and ambient
light sensor enables fitness wrist/arm bands, smart watches, and smartphones to measure
UV sun exposure. Customers benefit by receiving a warning of when their current UV
exposure is at an unhealthy level or to determine their cumulative UV exposure during
exercise.
Visible
Temp
Sensor
VDD
ADC
Long battery life with as little as 1.2 µA
average current UV Index measurements,
< 500 nA standby, and 1.7 V to 3.6 V
operation
Filter
I 2C interface for ease of communication
with host MCU
Signal Processing & Control Logic
INT
SCL
SDA
GND
Register
Map
SMBus
Digital UV Index sensor enables real-time
UV sun exposure and cumulative UV sun
exposure
mbient light sensor with 0.1 to 128 kLux
A
dynamic range operates in direct sunlight
AMUX
Infrared
IDEAL FOR WEARABLE
APPLICATIONS
Tiny 2 mm x 2 mm clear QFN package
Operating temperature – 40 to 85 °C
Oscillator
Si114x Multi-LED Heart Rate, SpO2, Proximity and Ambient Light
The monolithic Si114x sensors integrate high sensitivity photodiodes, a low-noise
analog-to-digital converter, analog filtering, up to 3-LED drivers and a digital I2C
control interface into one package. Broad spectral sensitivity supports green through
940nm LEDs for wrist, ear, and finger-tip heart rate/SpO2 signals. This low-power
sensing family enables long battery life with standby less than 500 nA and a short
25.6µs LED on time.
BIOMETRIC, PROXIMITY,
AND AMBIENT LIGHT
SENSING
Accurately sense weak blood flow signals
Ambient Light
Sources
Advanced signal processing to extract
heart rate information
Transparent Window
VDD
Infrared
Visible
Temp
Sensor
INT
SCL
SDA
Product Case
SMBus
AMUX
Infrared
Emitter
ADC
Broad spectral sensitivity supports green
through 940nm LEDs
Filter
LED
Drivers
LED1
Dynamically drive 1, 2, or 3 LEDs
LED3
Long battery life
LED2
I2C interface for ease of communication with host MCU
Signal Processing & Control Logic
Register
Map
GND
Oscillator
Tiny 2 mm x 2 mm clear QFN package
Powering an ever-increasing ecosystem of
connected devices
1.5B
Cities
1.7B
Buildings
Industry
Infrastructure
2020
2014
2B
0.3B
Body
Highly Integrated
High-precision sensor elements
Analog front-end
High resolution ADC
Health
0.4B
Transport
8B
Mobility
Connected
Devices
Accurate
Fully factory-calibrated
Highest sensitivity
Fast response times
Connected
Devices
3.7B
Home
Consumer
Low Power
Ultra-low sleep current
Fast measurement times
Automatic wakeup
Harbor Research, Inc. 03/2014
It’s not only about connecting devices. It’s about improving our
way of life. The way we do business, and the impact we have on
our environment. It’s called the Internet of Things, and it’s going
to change everything.
Automotive/Industrial
Up to -40 to 125 °C operation
AEC-Q100 qualified
PPAP/IMDS support
Full system-level solutions
In addition to highly integrated sensor products, Silicon Labs offers software and source code for a variety of applications,
along with full hardware and software reference designs.
Easy design-in and production ramp
All of Silicon Labs’ sensor products are compatible with SMT pick-and-place and reflow assembly processes. The full factory
calibration and minimal amount of external bill of materials keeps costs low.
High performance and flexibility
High performance sensor elements, combined with patented analog front end circuit design enables high sensitivity and wide
accuracy ranges. Multiple package options provide flexibility depending on the application requirements.
Energy-friendly relative humidity sensor family
offers flexibility to meet the needs of almost any
application.
Si700x/1x/2x Relative Humidity and Temperature Sensors
Silicon Labs’ state of the art relative humidity and temperature sensors utilize proven
techniques for measuring humidity using polymer dielectric film along with CMOS
mixed signal integrated circuits. These monolithic ICs combine fully calibrated
humidity and temperature sensing elements along with on-chip signal conditioning
into a compact, rugged and reliable package.
VSNS
Humidity
Sensor
VINN
Three RH accuracy levels up to ± 3% RH
(maximum) @ 0 to 80% RH
Two temperature accuracy levels up to
±0.4 °C (maximum) @ -10 to +85 °C
I2C or PWM outputs
As low as 2.2 μW average power at 3.3 V
and 1 sample per second
1.25V
Ref
Temperature
Sensor
VINP
Vdd
FEATURES
Calibration
Memory
ADD/OUT
Control Logic
Optional auxiliary 2nd zone sensor input
ADC
Analog
Input
Optional factory-installed filter/cover offers
lifetime protection of the sensor
Industry standard package footprint
Output Interface
SDA/PWM
SCL/PWM
Si705x Temperature Sensors
Silicon Labs’ digital temperature sensors feature innovative signal processing and mixedsignal designs that deliver high accuracy and industry-leading low power consumption.
All of these devices are factory calibrated and maintain their accuracy across the entire
operating voltage and temperature ranges. The integrated analog to digital converters
support up to 14-bit resolution for applications demanding high-precision.
Vdd
Voltage
Regulator
Temperature
Sensor
Four temperature accuracy levels from
±0.3 °C to ±1.0 °C (maximum)
Accuracy maintained over the entire
operating temperature and voltage range
–40 to +125 °C and 1.9 to 3.6V operating
ranges
Calibration
Memory
As low as 195 nA average current @ 1 Hz
sample rate
14-bit resolution
1.25V
Ref
I 2C Interface
1.25V
Ref
I 2C Interface
GND
FEATURES
I2C interface
SDA
SCL
3
Si 1146-A10-GMR
2x2 mm QFN-10
AEC-Q100 Proximity/ALS
Si1145-A10-GMR
2x2 mm QFN-10
Evaluation
Kit
AEC-Q100 Proximity/ALS
Interface
2x2 mm QFN-10
ALS
Si 1147-A10 -GMR
Gesture/
Motion
Sensing
LED
Drivers
-
Heart Rate
Monitor
Description
AEC-Q100 Proximity/ALS
Package
2x2 mm QFN-10
Part
Number
Si 1132-A10-GMR
-
✓
I2C
UVIrSlider2EK
✓
3D gesture detection
✓
I2C
UVIrSlider2EK
2
✓
2D gesture detection
✓
I2C
UVIrSlider2EK
Proximity/ALS
1
✓
Motion sensing
✓
I2C
UVIrSlider2EK
✓
3D gesture detection
✓
I2C
Si1140DK, IRMFB-EK
✓
2D gesture detection
✓
IC
Si1140DK, IRMFB-EK
✓
Motion sensing
✓
IC
Si1140DK, IRMFB-EK
OPTICAL SENSORS WITH UV INDEX
OPTICAL SENSORS WITHOUT UV INDEX
Si 1143-A11-YM0R
2x2 mm QFN-10
AEC-Q100 UV/Proximity/ALS
3
Si 1142-A11-YM0R
2x2 mm QFN-10
AEC-Q100 UV/Proximity/ALS
2
Si 1141-A11-YM0R
2x2 mm QFN-10
AEC-Q100 UV/Proximity/ALS
1
Si 1143-A11-GMR
2x2 mm QFN-10
UV/Proximity/ALS
3
✓
3D gesture detection
✓
IC
Si1140DK, IRMFB-EK
Si 1142-A11-GMR
2x2 mm QFN-10
Proximity/ALS
2
✓
2D gesture detection
✓
I2C
Si1140DK, IRMFB-EK
Si 1141-A11-GMR
2x2 mm QFN-10
Proximity/ALS
1
✓
Motion sensing
✓
I2C
Si1140DK, IRMFB-EK
Si 1102-A-GMR
2x2 mm QFN-10
Optical proximity detector
1
✓
-
-
Digital (On/
Off)
Si1102EK
2
2
Protective
Cover
Option
AEC-Q100
Qualified
w/ PPAP
Support
Standard
Footprint /
Drop-in
Replacement
Evaluation
Kit
±3%RH / 0.4°C
PWM
✓
✓
✓
Si7022-23-EVB
Si7021-A20
3x3mm, DFN-6
±3%RH / 0.4°C
IC
✓
✓
✓
Si7013USB-DONGLE
Si7013-A20*
3x3mm, DFN-10
±3%RH / 0.4°C
IC
✓
✓
-
Si7013USB-DONGLE
Si7022-A20
3x3mm, DFN-6
±4%RH / 0.4°C
PWM
✓
✓
✓
Si7022-23-EVB
Si7020-A20
3x3mm, DFN-6
±4%RH / 0.4°C
IC
✓
✓
✓
Si7013USB-DONGLE
Si7007-A20
3x3mm, DFN-6
±5%RH / 1.0°C
PWM
✓
-
✓
Si7006-07-EVB
Si7006-A20
3x3mm, DFN-6
±5%RH / 1.0°C
IC
✓
-
✓
Si7006-07-EVB
Accuracy
(Max)
3x3mm, DFN-6
Package
Si7023-A20
Part Number
Output
2
RELATIVE HUMIDITY AND TEMPERATURE SENSORS
2
2
2
2
TEMPERATURE SENSORS
Si7053-A20
3x3mm, DFN-6
±0.3°C
I2C
-
✓
-
Si7053-EVB
Si7054-A20
3x3mm, DFN-6
±0.4°C
I2C
-
✓
-
Si7054-EVB
Si7055-A20
3x3mm, DFN-6
±0.5°C
I2C
-
✓
-
Si7055-EVB
Si7050-A20
3x3mm, DFN-6
±1.0°C
I2C
-
✓
-
Si7050-EVB
*Note: Includes 2-zone temperature sensor
Silicon Labs’ Sensor
Development Tools
SLSTK3201A
SENSOR-PUCK
BIOMETRIC-EXP
This kit contains both the EFM32™ Zero Gecko STK and sensor
expansion board, which contains Silicon Labs’ Si7013 Relative
Humidity and Temperature Sensor, Si1147 Si1147 HRM/SpO2/
Proximity/UV/Ambient Light Sensor..
The SENSOR-PUCK provides a convenient
environmental and biometric sensor
evaluation tool using Silicon Labs’ Si114x
Optical Sensors and Si701x/2x Relative
Humidity and Temperature Sensors.
The BIOMETRIC-EXP-EVB card provides a
convenient development and demo platform
for Silicon Labs’ Si114x heart rate/SpO2/UV
sensor and Si701x/2x Relative Humidity and
Temperature Sensors.
www.silabs.com | Smart. Connected. Energy-Friendly.
Silicon Labs’
design
resources
allow for quick
and easy
development
and demos.
The SENSOR-PUCK is an easy to
demonstrate, small, low-power, sensor IoT
system that uses Bluetooth low energy to
broadcast environmental and biometric
sensor measurements to smartphones
using Silicon Labs iPhone or Android
apps.
www.silabs.com/sensor-puck
HRM Development Kit
Online Utilities
Need Help
Silicon Labs Community
This $49.99 kit is an excellent
starting point for developing
wearables with Silicon Labs
Use IR Range Estimator, Sensor
Current Estimator, plus CrossReference search tools to
streamline development
Ask questions and contact our
experts directly in the support
portal.
Find the support and answers
you need on Silicon Labs
community forum.
www.silabs.com/support
community.silabs.com
Find your nearest distributor, or buy or sample
online, see details at www.silabs.com/sensors
©2015, SILICON LABORATORIES INC. SIMPLICITY STUDIO, SILICON LABS AND THE SILICON LABS LOGO ARE TRADEMARKS OR REGISTERED TRADEMARKS OF SILICON LABORATORIES INC. ALL OTHER PRODUCT OR
SERVICE NAMES ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. FOR THE MOST UP TO DATE INFORMATION PLEASE SEE YOUR SALES REPRESENTATIVE OR VISIT OUR WEBSITE AT WWW.SILABS.COM. CSI, 1000.
FEBRUARY 2015, REV A SEL-SENSORS