SS22, SS23, SS24, SS25, SS26 Datasheet

SS22, SS23, SS24, SS25, SS26
www.vishay.com
Vishay General Semiconductor
Surface Mount Schottky Barrier Rectifier
FEATURES
• Low profile package
• Ideal for automated placement
• Guardring for overvoltage protection
• Low power losses, high efficiency
• Low forward voltage drop
• High surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
DO-214AA (SMB)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3
PRIMARY CHARACTERISTICS
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
IF(AV)
2.0 A
VRRM
20 V, 30 V, 40 V, 50 V, 60 V
IFSM
75 A
VF
0.50 V, 0.70 V
TJ max.
150 °C
Package
DO-214AA
Diode variations
Single
MECHANICAL DATA
Case: DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,.....)
TYPICAL APPLICATIONS
For use in low voltage high frequency inverters,
freewheeling, DC/DC converters, and polarity protection
applications.
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
SS22
SS23
SS24
SS25
SS26
S2
S3
S4
S5
S6
UNIT
Maximum repetitive peak reverse voltage
VRRM
20
30
40
50
60
V
Maximum RMS voltage
VRMS
14
21
28
35
42
V
Maximum DC blocking voltage
VDC
20
30
40
50
60
Max. average forward rectified current at TL (fig. 1)
IF(AV)
2.0
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
75
A
Non-repetitive avalanche energy at TA = 25 °C,
IAS = 2.0 A, L = 10 mH
EAS
20
mJ
Electrostatic discharge capacitor voltage
Human body model: C = 100 pF, R = 1.5 k
VC
8.0
kV
dV/dt
10 000
V/μs
TJ
-65 to +150
°C
TSTG
-65 to +150
°C
Voltage rate of change (rated VR)
Operating junction temperature range
Storage temperature range
V
Revision: 04-Aug-15
Document Number: 88748
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SS22, SS23, SS24, SS25, SS26
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous forward voltage (1)
2.0 A
Maximum DC reverse current at rated DC
blocking voltage (1)
TA = 25 °C
SYMBOL
SS22
SS23
VF
SS25
SS26
0.7
UNIT
V
0.4
IR
TA = 100 °C
SS24
0.5
mA
10
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance (1)
SS22
SS23
SS24
RJA
75
RJL
17
SS25
SS26
UNIT
°C/W
Note
PCB mounted with 0.55" x 0.55" (14 mm x 14 mm) copper pad areas
(1)
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SS24-E3/52T
0.096
52T
750
7" diameter plastic tape and reel
SS24-E3/5BT
0.096
5BT
3200
13" diameter plastic tape and reel
SS24HE3/52T (1)
0.096
52T
750
7" diameter plastic tape and reel
(1)
0.096
5BT
3200
13" diameter plastic tape and reel
SS24HE3_A/H (1)
0.096
H
750
7" diameter plastic tape and reel
SS24HE3_A/I (1)
0.096
I
3200
13" diameter plastic tape and reel
SS24HE3/5BT
Note
(1) AEC-Q101 qualified
2.5
100
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)

RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted)
2.0
1.5
1.0
PCB Mounted on 0.2" x 0.2"
(5.0 mm x 5.0 mm) Copper Pad Area
0.5
SS22 thru SS26
0
0
25
50
75
100
125
150
At Rated TL
8.3 ms Single Half Sine-Wave
80
60
40
20
0
1
10
100
Lead Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Surge Current
Revision: 04-Aug-15
Document Number: 88748
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SS22, SS23, SS24, SS25, SS26
www.vishay.com
Vishay General Semiconductor
1000
10
TJ = 150 °C
Pulse Width = 300 ˩s
1% Duty Cycle
1
TJ = 25 °C
0.1
SS22 thru SS24
100
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
SS22 thru SS24
SS25 and SS26
SS25 and SS26
0
Instantaneous Reverse Current (mA)
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
1.6
0.1
1
10
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance

















1000
SS22 thru SS24
SS25 and SS26
100
TJ = 150 °C
10
1
TJ = 125 °C
TJ = 75 °C
0.1
TJ = 25 °C
0.01
0.001
0
20
40
60
80
100
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Current Characteristics
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AA (SMB)
Cathode Band
Mounting Pad Layout
0.085 (2.159)
MAX.
0.155 (3.94)
0.130 (3.30)
0.086 (2.20)
0.077 (1.95)
0.086 (2.18)
MIN.
0.180 (4.57)
0.160 (4.06)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
MIN.
0.096 (2.44)
0.084 (2.13)
0.220 REF.
0.008 (0.2)
0 (0)
0.060 (1.52)
0.030 (0.76)
0.220 (5.59)
0.205 (5.21)
Revision: 04-Aug-15
Document Number: 88748
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000