013 RLC www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Radial Low Leakage Current FEATURES • • • • • 013 RLC standard leakage current Useful life at +85 °C: 3000 h Low leakage current, low energy consumption Miniaturized, high CV-product per unit volume Natural pitch 2.5 mm and 5 mm Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, all-insulated (light blue) • Charge and discharge proof • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 036 RSP Fig. 1 APPLICATIONS • Telecommunication, automotive, audio-video, EDP and industrial • Coupling, decoupling, buffering, timing, energy storage • Portable and mobile equipment • Low surface demand on printed-circuit board QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Leakage current after 2 min: UR = 6.3 V to 25 V UR = 35 V and 50 V Endurance test at 85 °C Useful life at 105 °C Useful life at 85 °C Useful life at 40 °C, 1.4 x IR applied Shelf life at 0 V, 85 °C Based on sectional specification Climatic category IEC 60068 VALUE 5 x 11 and 8.2 x 11 2.2 μF to 470 μF ± 20 %; ± 10 % on request 6.3 V to 50 V -40 °C to +85 °C MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer • “-”-sign on top to identify the negative terminal • Series number (013) 0.002 CR x UR or 0.7 μA, whichever is greater 0.002 CR x UR + 1 μA 2000 h 750 h 3000 h 80 000 h 500 h IEC 60384-4 / EN 130300 40/085/56 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 2.2 3.3 4.7 10 22 33 47 68 100 220 330 470 Revision: 26-Apr-16 UR (V) 6.3 8.2 x 11 8.2 x 11 10 5 x 11 5 x 11 5 x 11 8.2 x 11 - 16 5 x 11 5 x 11 - 25 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 8.2 x 11 - 35 5 x 11 8.2 x 11 - 50 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 8.2 x 11 8.2 x 11 8.2 x 11 - Document Number: 28313 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 013 RLC www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD ØD L 15 min. 4 +1 0 F Ød Ød 5 min. 5 ± 0.5 Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads Case Ø D x L = 5 mm x 11 mm and 8.2 mm x 11 mm Pitch F = 5 mm Case Ø D x L = 5 mm x 11 mm only Pitch F = 2.5 mm Fig. 4 - Form TFA: Taped in box (ammopack) Fig. 5 - Form TNA: Taped in box (ammopack) DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) 5 x 11 11 0.5 5.5 12 2.5 ± 0.5 8.2 x 11 13 0.6 8.7 12 5.0 ± 0.5 FORM CA, CB FORM TFA, TNA 0.4 1000 2000 1.1 1000 1000 Note • For detailed tape dimensions, please see www.vishay.com/doc?28360. Revision: 26-Apr-16 Document Number: 28313 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 013 RLC www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 013 series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 Hz, 85 °C IL2 Max. leakage current after 2 min at UR tan 100 μF/16 V; ± 20 % Nominal case size: Ø 8.2 mm x 11 mm; Form TFA Ordering Code: MAL201335101E3 Former 12NC: 2222 013 35101 Max. dissipation factor at 100 Hz Z Max. impedance at 10 kHz and + 20 °C Note • Unless otherwise specified, all electrical values in Table 1 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 1 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 50 ORDERING CODE MAL2013....... CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 85 °C (mA) IL2 2 min (μA) tan 100 Hz 330 8.2 x 11 210 4.2 0.2 0.9 53331E3 5.0 63331E3 5.0 33331E3 5.0 - - 470 8.2 x 11 250 5.9 0.2 0.64 53471E3 5.0 63471E3 5.0 33471E3 5.0 - - 47 5 x 11 75 1.0 0.16 2.8 54479E3 2.5 - - 34479E3 5.0 74479E3 2.5 Z 10 kHz () BULK PACKAGING LONG LEADS FORM CA F (mm) CUT LEADS FORM CB F (mm) TAPED AMMOPACK FORM TFA F (mm) FORM TNA F (mm) 68 5 x 11 90 1.4 0.16 2.5 54689E3 2.5 - - 34689E3 5.0 74689E3 2.5 100 5 x 11 110 2.0 0.16 1.7 54101E3 2.5 - - 34101E3 5.0 74101E3 2.5 220 8.2 x 11 190 4.4 0.16 0.9 54221E3 5.0 64221E3 5.0 34221E3 5.0 - - 33 5 x 11 70 1.1 0.13 2.8 55339E3 2.5 - - 35339E3 5.0 75339E3 2.5 47 5 x 11 85 1.5 0.13 2.1 55479E3 2.5 - - 35479E3 5.0 75479E3 2.5 100 8.2 x 11 150 3.2 0.13 1.0 55101E3 5.0 65101E3 5.0 35101E3 5.0 - - 2.2 5 x 11 10 0.7 0.06 18 56228E3 2.5 - - 36228E3 5.0 76228E3 2.5 3.3 5 x 11 18 0.7 0.06 12 56338E3 2.5 - - 36338E3 5.0 76338E3 2.5 4.7 5 x 11 25 0.7 0.06 8.5 56478E3 2.5 - - 36478E3 5.0 76478E3 2.5 10 5 x 11 50 0.7 0.06 4.0 56109E3 2.5 - - 36109E3 5.0 76109E3 2.5 22 5 x 11 75 1.1 0.08 2.7 56229E3 2.5 - - 36229E3 5.0 76229E3 2.5 47 8.2 x 11 130 2.4 0.08 1.3 56479E3 5.0 66479E3 5.0 36479E3 5.0 - - 33 5 x 11 70 3.3 0.13 2.8 50339E3 2.5 - - 30339E3 5.0 70339E3 2.5 100 8.2 x 11 150 8.0 0.13 1.0 50101E3 5.0 60101E3 5.0 30101E3 5.0 - - 2.2 5 x 11 20 1.2 0.06 18 51228E3 2.5 - - 31228E3 5.0 71228E3 2.5 3.3 5 x 11 32 1.3 0.06 12 51338E3 2.5 - - 31338E3 5.0 71338E3 2.5 4.7 5 x 11 38 1.5 0.06 8.5 51478E3 2.5 - - 31478E3 5.0 71478E3 2.5 10 5 x 11 55 2.0 0.06 4.0 51109E3 2.5 - - 31109E3 5.0 71109E3 2.5 22 5 x 11 75 3.2 0.08 2.7 51229E3 2.5 - - 31229E3 5.0 71229E3 2.5 33 8.2 x 11 110 4.3 0.06 1.4 51339E3 5.0 61339E3 5.0 31339E3 5.0 - - 47 8.2 x 11 130 5.7 0.08 1.3 51479E3 5.0 61479E3 5.0 31479E3 5.0 - - 68 8.2 x 11 150 7.8 0.08 1.2 51689E3 5.0 61689E3 5.0 31689E3 5.0 - - Revision: 26-Apr-16 Document Number: 28313 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 013 RLC www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage Us 1.3 x UR Reverse voltage Urev 1 V Current After 2 min at UR: Leakage current UR = 6.3 V to 25 V IL2 0.002 CR x UR or 0.7 μA, whichever is greater UR = 35 V and 50 V IL2 0.002 CR x UR + 1 μA Case Ø D x L = 5 mm x 11 mm Typ. 13 nH Case Ø D x L = 8.2 mm x 11 mm Typ. 16 nH Calculated from tan max. and CR (see Table 1) ESR = tan /2 f CR Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) CAPACITANCE (C) 1.1 1.1 4 C C C C 1 0 0 6 1 1.0 1.0 1 1 2 3 0.9 2 0.9 4 Curve 1: 25 V and 50 V, 2.2 µF Curve 2: 25 V and 50 V, 3.3 µF to 6.8 µF Curve 3: 25 V and 50 V, 10 µF to 68 µF Curve 4: 6.3 V, 10 V, 16 V, 35 V 0.8 3 4 Curve 1: 25 V and 50 V, 2.2 µF Curve 2: 25 V and 50 V, 3.3 µF to 6.8 µF Curve 3: 25 V and 50 V, 10 µF and 15 µF Curve 4: 25 V and 50 V, 22 µF to 68 µF Curve 5: 16 V and 35 V Curve 6: 6.3 V and 10 V 0.8 5 6 0.7 0.7 - 40 - 20 0 20 40 60 100 80 C0 = Capacitance at 20 °C, 100 Hz Tamb (°C) 10 10 2 3 4 10 10 C0 = Capacitance at 20 °C, 100 Hz Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature f (Hz) 105 Tamb (°C) Fig. 7 - Typical multiplier of capacitance as a function of frequency LEAKAGE CURRENT 10 1.0 I I0 I I0 0.8 0.6 1 0.4 0.2 10-1 0 0 20 40 60 80 I0 = Leakage current during continuous operation at 20 °C and UR Fig. 8 - Typical multiplier of leakage current as a function of ambient temperature Revision: 26-Apr-16 100 Tamb (°C) 0 0.2 0.4 0.6 I0 = Leakage current during continuous operation at 20 °C and UR 0.8 U UR 1.0 Fig. 9 - Typical multiplier of leakage current as a function of time Document Number: 28313 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 013 RLC www.vishay.com Vishay BCcomponents LEAKAGE CURRENT 10 I I 0 1 10 -1 10 -2 103 102 10 1 I0 = Leakage current t (s) Fig. 10 - Typical multiplier of leakage current as a function of time RIPPLE CURRENT AND USEFUL LIFE CCC205 3.3 IA IR 3.2 3.1 3.0 2.8 2.6 2.4 Lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 0 4. 1.8 10 Useful life at 85 °C and IR ripple current load 30 (1) (1) 50 70 IR = Ripple current at 85 °C, 100 Hz 1.4 1.2 1.0 0.8 0.5 0.0 15 20 IA = Actual ripple current at 100 Hz 0 6. 1.6 40 50 60 70 80 90 100 Tamb (°C) Fig. 11 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 2 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V UR = 10 V, 16 V, and 35 V UR = 25 V and 50 V 50 0.90 0.85 0.80 100 1.00 1.00 1.00 300 1.12 1.20 1.25 1000 1.20 1.30 1.40 3000 1.25 1.35 1.50 10 000 1.30 1.40 1.60 Revision: 26-Apr-16 Document Number: 28313 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 013 RLC www.vishay.com Vishay BCcomponents Table 3 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4 / EN130300, subclause 4.13 PROCEDURE REQUIREMENTS Tamb = 85 °C; UR applied; 2000 h UR 6.3 V; C/C: + 15 %/- 30 % UR > 6.3 V; C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 85 °C; UR and IR applied; 3000 h UR 6.3 V; C/C: + 45 %/- 50 % UR > 6.3 V; C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-4 / EN130300, subclause 4.17 Tamb = 85 °C; no voltage applied; 500 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C, tan , Z: For requirements see “Endurance test” above IL2 2 x spec. limit Revision: 26-Apr-16 Document Number: 28313 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000