CX3HGSM AT CRYSTAL 9.6 MHz to 250 MHz High Shock, Low Profile, Miniature Surface Mount AT Quartz Crystal Fundamental Mode: 9.6 MHz - 250 MHz DESCRIPTION STATEK’s miniature CX3SM AT crystals in leadless ceramic packages are designed for surface mounting on printed circuit boards or hybrid substrates. These crystals are low profile and have a small land pattern. These rugged crystals are designed for applications requiring higher shock and vibration survival. actual size XX X X S glass lid side view ceramic lid PACKAGE DIMENSIONS FEATURES D High shock and vibration survival Designed for surface mount applications using infrared, vapor phase, or epoxy mount techniques. Low profile (less than 1.5 mm available) hermetically TOP A E sealed ceramic package BOTTOM Excellent aging characteristics Available with glass or ceramic lid D High shock and vibration resistance E B Custom designs available C Full military testing available Designed and manufactured in the USA APPLICATIONS Medical Monitoring Equipment Industrial, Computer & Communications Instrumentation TYPICAL MAXIMUM DIM inches mm inches mm A 0.263 6.68 0.270 6.86 B 0.097 2.46 0.104 2.64 C - - D 0.052 1.32 0.058 1.47 E 0.030 0.76 0.035 0.89 see below Down-hole Data Recorder Engine Control Handheld Inventory Control THICKNESS (DIM C) MAXIMUM Telemetry GLASS LID Military & Aerospace Communications Smart Munitions Timing Devices CERAMIC LID inches mm inches mm SM1 0.053 1.35 0.067 1.70 SM2/SM4 0.055 1.40 0.069 1.75 SM3/SM5 0.058 1.47 0.072 1.83 Surveillance Devices TEM C ERT I F I C AT IO S 10182 Rev A YS N IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 90 01 SPECIFICATIONS TERMINATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Designation SM1 SM2 SM3 SM4 SM5 Fundamental Frequency 10 MHz 32 MHz 155.52 MHz Motional Resistance R1 (Ω) 60 25 10 Motional Capacitance C1 (fF) 2.8 6.2 4.0 Quality Factor Q (k) 95 30 30 Shunt Capacitance C0 (pF) 1.4 2.3 2.3 Calibration Tolerances1 ± 100 ppm, or tighter as required Load Capacitance 20 pF for f ≤ 50 MHz 2 Termination Gold Plated Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) Max Process Temperature 260OC for 20 sec. SUGGESTED LAND PATTERN 10 pF for f > 50 MHz 0.070 (1.78) Drive Level 500 µW MAX for f ≤ 50 MHz Frequency-Temperature Stability1,3 ± 50 ppm to ± 10 ppm (Commercial) 200 µW MAX for f > 50 MHz 0.120 (3.05) ± 100 ppm to ± 20 ppm (Industrial) ± 100 ppm to ± 30 ppm (Military) Aging, first year 10 ppm MAX Shock, survival Up to 20,000 g, 0.3 ms, 1/2 sine Vibration, survival5 20 g, 10-2,000 Hz swept sine Operating Temp. Range -10 C to +70 C (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC 4 O 0.215 (5.46) inches (mm) EQUIVALENT CIRCUIT C0 O L1 C1 R1 Max Process Temperature 260OC for 20 sec. R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance 1. Other tolerances available. Contact factory. 2. Unless specified otherwise. 3. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the AT thickness-shear mode. 4. 10 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher frequencies contact factory. 5. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. PACKAGING OPTIONS • Tray Pack • 16mm tape, 7” or 13” reels Per EIA 481 (see Tape and Reel data sheet 10109) HOW TO ORDER CX3HGSM AT CRYSTALS CX3 S “S” if special or custom design. Blank if Std. HG1 HG1 = 10,000 g HG2 = 20,000 g C C = Ceramic Lid Blank = Glass Lid SM1 – 32.0M Frequency M = MHz SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) , 100 / Calibration Tolerance @ 25OC (in ppm) 100 / — / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified Frequency Stability over Temp. Range (in ppm) OR — / — / 200 Total Frequency Tolerance (in ppm) / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified TEM C ERT I F I C AT IO S 10182 Rev A YS N IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 90 01