SELECTION GUIDE The widest choice of quartz crystals, oscillators and sensors Visit our website www.statek.com T H E C O M PA N Y KEY ATTRIBUTES In 1970, Statek Corporation was the first to use semiconductor technology such as photolithography, chemical etching and micromachining to manufacture quartz resonators in wafer form. Today, Statek remains at the forefront of innovation in the design, development and manufacturing of highly reliable, ultra-miniature quartz-based frequency control products. Innovative in-house design, production and testing capabilities make possible not only rapid new product development and validation, but also continuous improvement of key product features such as low acceleration sensitivity, high shock, tight calibration tolerance, low aging, radiation resistance, and highly stable frequencies at increasingly higher operating temperatures. Ultra miniature products Highest shock survivability in the industry High stability and precision Proven reliability Excellent long-term aging Full military testing Widest selection of packaging options Prompt specialized technical support Full lot traceability Designed and manufactured in the USA EXAMPLES OF APPLICATIONS Medical Defense and Aerospace Industrial Cardiac rhythm management Smart munitions Oil and gas exploration Neurostimulators High shock embedded electronics Directional drilling RF telemetry Guidance and navigation Ruggedized wireless communications Infusion pumps Communications Force, temperature, pressure sensors Cochlear implants Sensors (IMU) Inventory control Orthopedic implants Avionics Transport safety Retinal implants Military medical devices Public transport electronics Glaucoma implants Space / Satellites In-flight entertainment systems Patient monitoring equipment Unmanned Aerial Vehicles (UAV) Aircraft engines ISO 9001 STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 TEL. 714-639-7810 FAX 714-997-1256 www.statek.com AS9100 10100 - Rev L SURFACE MOUNT CRYSTALS – 10 kHz to 250 MHz CX1 Frequency Range Reference Data Sheets 10 kHz to 600 kHz (Tuning Fork) 10121 10122 10183 10129 10185 10107 10108 10184 10199 530 kHz to 2.1 MHz (Extensional) 6 MHz to 250 MHz (AT Fundamental) CX1VSM TF CX1HSM TF CX1VHT CX1SM EXT CX1HT EXT CX1SM AT CX1HGSM AT CX1HT AT SWCX1SM AT HG = HIGH SHOCK, HT = HIGH TEMPERATURE, SW = SWEPT QUARTZ CX3 18 kHz to 600 kHz (Tuning Fork) 800 kHz to 1.35 MHz (Extensional) 10104 CX3VSM TF 10146 CX3HSM TF 10123 CX3SM EXT 9.6 MHz to 250 MHz (AT Fundamental) 10120 CX3SM AT 10182 CX3HGSM AT 30 kHz to 250 kHz (Tuning Fork) 600 kHz to 2.5 MHz (Extensional) 14 MHz to 250 MHz (AT Fundamental) 14 MHz to 50 MHz (High Shock) 10103 10183 10161 10185 HG = HIGH SHOCK CX4 HG = HIGH SHOCK, HT = HIGH TEMPERATURE HIGHEST SHOCK SURVIVABILITY CX6 CX9 CX4VSM TF CX4VHT TF CX4 EXT CX4HT EXT 10150 CX4SM AT 10184 CX4HT AT 10165 CX4HGSM AT 18 kHz to 600 kHz (Tuning Fork) 800 kHz to 1.35 MHz (Extensional) 9.6 MHz to 250 MHz (AT Fundamental) 10132 CX6VSM TF 32 kHz to 250 kHz (Tuning Fork) 32 kHz to 160 kHz (Tuning Fork / High Temp) 10157 CX9VSM TF 13.5 MHz to 250 MHz (AT Fundamental) 10158 CX9SM AT 10187 CX9 Telemetry 32 kHz to 180 kHz (Tuning Fork) 10174 CX11SM TF 16 MHz to 250 MHz (AT Fundamental) 10179 CX11SM AT 10133 CX6SM EXT 10117 CX6SM AT 10183 CX9VHT TF HT = HIGH TEMPERATURE CX11/CX11L/CX11LHG 10188 CX11L Telemetry L = Low-Profile Package Version, 0.51mm typical height HG = HIGH SHOCK CX14 16 MHz to 50 MHz (AT Fundamental / High Shock) 10193 CX11LHG 12 MHz to 50 MHz (AT Fundamental) 10173 CX14SM AT 10100 - Rev L STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 TEL. 714-639-7810 FAX 714-997-1256 www.statek.com SURFACE MOUNT CRYSTALS – 10 kHz to 250 MHz (continued) CX16 2.0 x 1.2 mm CX17 High Pullability for VCTCXO Applications CX18 1.55 x 0.95 mm Frequency Range Reference Data Sheets 24 MHz to 50 MHz (AT Fundamental) 10200 CX16SM AT 12 MHz to 200 MHz (AT Fundamental) 10206 CX17SM AT 30 MHz to 50 MHz (AT Fundamental) 10207 CX18SM AT Frequency Range Reference Data Sheets 10 kHz to 600 kHz (Tuning Fork) 530 kHz to 2.1 MHz (Extensional) 10101 CX1V TF 10102 CX1H TF 10130 CX1 EXT 6 MHz to 250 MHz (AT Fundamental) 10127 CX1 AT 10202 CX1HT-06 10199 SWCX1 AT 16 kHz to 600 kHz (Tuning Fork) 760 kHz to 1.35 MHz (Extensional) 10138 CX2V TF 9.6 MHz to 250 MHz (AT Fundamental) 10140 CX2 AT 10202 CX2HT-06 10202 CX2HT-07 30 kHz to 250 MHz 10194 SX1HT Actual Size THRU-HOLE CRYSTALS – 10 kHz to 250 MHz CX1 -03 SIDE LEAD SW = SWEPT QUARTZ CX2 -03 SIDE LEAD -02 END LEAD 5.08mm -04 SIDE LEAD 10139 CX2 EXT 1.27mm 2.54mm HT = HIGH TEMPERATURE SX1 HT = HIGH TEMPERATURE (up to +260ºC) O R D E R I N G O P T I O N S F O R S TAT E K Q UA R T Z C RYS TA L S e.g. CX11 S Model S=Special or custom design. Blank if std. C C=Ceramic Lid Blank=Glass Lid Designate “H” for Series, “V” for Pierce: 10 kHz to 600 kHz Tuning Fork design only. Leave blank for standard AT cut designs. NOTE: For specific ordering requirements, call us at 714-639-7810. Please refer to the model data sheet for detail of all available parameters / options. SM1 - 32.0M, 50 Frequency K=kHz M=MHz Calibration Tolerance @ 25ºC (in ppm) Terminations SM1 = Gold Plated (Pb Free) SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Pb Free) SM5 = Solder Dipped (Pb Free) - / 50 / - Frequency Stability Over Temp. Range (in ppm) Or / - I / Temp. Range: C = -10ºC to +70ºC I = -40ºC to +85ºC M = -55ºC to +125ºC S = Specify / 100 / I Total Frequency Stability over Temp. Range (in ppm) 10100 - Rev L STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 TEL. 714-639-7810 FAX 714-997-1256 www.statek.com SURFACE MOUNT OSCILLATORS 30 kHz to 300 MHz CXOL 3.20mm Model Features Package Configuration Frequency Reference Range Data Sheets CXOL 4-pad Ceramic SMD 1.2V to 5.0V operation CMOS/TTL compatible Enable/Tri-state output 32 kHz to 100 kHz 10205 32.768 kHz 10217 0.95mm Fast Start-up 1.50 mm ULTRA-LOW CURRENT CXOMK GM M 4.19 6.50mm 5.00mm 1.34mm CXOQ 2.00mm 2.50mm 4-pad Ceramic SMD 0.9V to 5V operation CMOS/TTL compatible Enable/Tri-state output 200 kHz to 200 MHz 10210 CXOMKHT High Temp 4-pad Ceramic SMD 3.3V or 5V operation CMOS/TTL compatible Enable/Tri-state output 200 kHz to 50 MHz 10180 CXOMKHT High Temp Fast Start-up 4-pad Ceramic SMD 3.3V operation CMOS/TTL compatible Enable/Tri-state output 32.768 kHz 10201 CXOQ/ CXOQHG High Shock 4-pad Ceramic SMD 1.8V to 3.3V operation CMOS/TTL compatible Enable/Tri-state output 400 kHz to 100 MHz 10190 CXOX/ CXOXHG High Shock 4-pad Ceramic SMD 1.8V to 5V operation CMOS/TTL compatible Enable/Tri-state output 1 MHz to 160 MHz 32.768 kHz 10168 CXOXHT High Temp 4-pad Ceramic SMD 3.3V or 5V operation CMOS/TTL compatible Enable output 1 MHz to 50 MHz 10180 32.768 kHz 10201 0.89mm CXOX 3.20mm 2.50mm CXOMK CXOMKHG High Shock 1.00mm Fast Start Up CXOXULP DFXO 7.0mm 6.50mm 6-pad Ceramic SMD 2.5V to 3.3V operation 20 MHz to LVPECL, LVDS, CMOS 300 MHz outputs available Low phase noise Low phase jitter High frequency 10196 4-pad HFXO High Precision Ceramic SMD High Shock 0.9V to 5V operation 220 kHz to CMOS/TTL compatible 100 MHz hybrid circuit Shock survivability of 75,000 g Tight frequency tolerance 10189 HGXO High Shock 1.8V to 5V operation CMOS/TTL compatible Extreme high shock survivability up to 100,000 g. Highest accuracy and stability 10156 1.65mm HGXO HGXOHT High Temp 7.50mm 5.00mm 10216 1.75mm HFXO 5.00mm Ultra-Low Power DFXO Differential Output Low Jitter 5.0 mm 2.50mm 10203 (3.3V) Fast Start Up and High Temp 4-pad Ceramic SMD 460 kHz to 50 MHz 10208 (3.3V and 5.0V) 32.768 kHz 10209 HIGHEST SHOCK SURVIVABILITY 10100 - Rev L STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 TEL. 714-639-7810 FAX 714-997-1256 www.statek.com SURFACE MOUNT OSCILLATORS 30 kHz to 300 MHz (continued) Model HTXO 7.50mm Features Package Configuration Frequency Reference Range Data Sheets HTXO 4-pad High Ceramic Temperature SMD 3.3V and 5V operation CMOS output Extreme high temperature survivability up to 250ºC High stability Tri-state output (optional) 1.5 MHz to 50 MHz 10214 LFXO Fast Start Up 1.8V to 5V operation CMOS/TTL compatible High shock resistance Tight frequencytemperature stability 32.768 kHz 10191 3.3V or 5V operation CMOS compatible Tri-state output (optional) Lowest current Highest accuracy and stability 30 kHz to 400 kHz 10151 700 kHz to 2.1 MHz 10154 10153 1.50mm 5.00mm LFXO 6.50mm 1.60mm 5.00mm LSM/LSC LFXOTF Low Power LSM 4-pad Ceramic SMD 10.20mm 1.80mm LSM 1.65mm LSC 4.50mm 4-pad Ceramic SMD 3.3V or 5V operation CMOS compatible Tri-state output (optional) Lowest current 30 kHz to 400 kHz VCXO 6-pad Ceramic SMD 3.3V operation CMOS/TTL compatible High frequency 16.384 MHz 10197 to 130 MHz Model Package Features Configuration LHGAT High Shock 4-Pin Ceramic SX 7.00mm 5.00mm 1.75mm LEADED OSCILLATORS 320 kHz to 50 MHz LHGAT/LHTAT 7.00 mm 4.90mm 5.00mm LHTAT High Temperature 1.65mm 5.08mm 10195 LSC X XX VCXO 4-pad Ceramic SMD Frequency Reference Range Data Sheets 3.3V operation CMOS/TTL compatible Enable/Tri-state output 10211 320 kHz to 50 MHz (outward bent leads available) 10204 5 x 7 mm PIN 1 5.08 mm O R D E R I N G O P T I O N S F O R S TAT E K Q UA R T Z C RYS TA L O S C I L L ATO R S e.g. CXOMK 4 Supply Voltage 1 = 1.8 V 2 = 2.5 V 3 = 3.0 V 4 = 3.3 V 5 = 5.0 V S T* SM3 - 32.0M Frequency S = special E = Enable K = kHz T = Tri-State or custom M = MHz N = Neither design Blank = Std. Terminations *The T option is not Blank = SM1 Gold Plated available in all frequencies. (Pb Free) See data sheet. SM3 = Solder Dipped NOTE: For specific ordering requirements, call us at 714-639-7810. SM5 = Solder Dipped Please refer to the model data sheet for detail of all (Pb Free) Model available parameters and options. 50 / 50 / - Frequency Stability over Temp. Range (in ppm) Calibration Tolerance @ 25ºC (in ppm) I / Temp. Range C = -10ºC to +70ºC I = -40ºC to +85ºC M = -55ºC to +125ºC S = Specify Or - / - / 100 / I Total Frequency Stability over Temp. Range (in ppm) 10100 - Rev L STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 TEL. 714-639-7810 FAX 714-997-1256 www.statek.com TEMPERATURE SENSORS - 160 kHz to 350 kHz TS1 See CX1 surface mount and leaded package Frequency Range Reference Data Sheets 160 kHz to 350 kHz (Tuning Fork) 10162 160 kHz to 350 kHz (Tuning Fork) 10162 configurations for typical dimensions. TS2 See CX2 surface mount and leaded package configurations for typical dimensions. LEGACY OSCILLATORS 3 Pin / 6 Pin TO-39 / TO-5 TCXO/OCXO Statek provides full support for its legacy oscillators. Please contact us. 24 Pad LCC Leadless Chip Carrier 4 Pin Half DIP 4 Pin Full DIP PLEASE CONTACT OUR SISTER COMPANY: GREENRAY INDUSTRIES, TEL: 717-766-0223 FAX: 717-790-9509 / WEBSITE: WWW.GREENRAYINDUSTRIES.COM Statek Corporation maintains synergetic relationships with sister companies Greenray Industries (www.greenrayindustries.com) and Advanced Technical Ceramics Company (www.adtechceramics.com), both leaders in their respective industries. Our alliance helps us to best serve our customers with leading-edge innovation and world-class manufacturing, all from a single source. Statek Corporation Orange, California Greenray Industries Mechanicsburg, Pennsylvania Advanced Technical Ceramics Company Chattanooga, Tennessee ISO 9001 STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 TEL. 714-639-7810 FAX 714-997-1256 www.statek.com AS9100 10100 - Rev L