™ The Widest Selection of Quartz Crystals, Oscillators and Sensors THE COMPANY For more than 35 years, Statek Corporation has been the acknowledged leader in the design, development and manufacturing of highly reliable, micro-machined, ultraminiature quartz products. Our in-house technological capability enables us to reduce "Production" and "New Product Development" cycle times, and to scale up new and custom products quickly. Our R&D engineers continue to develop new products and customized solutions to meet the specialized needs of our customers, such as low acceleration sensitivity, high-shock, tight tolerance, low aging, radiation resistance and extended temperatures. We welcome new application challenges and are committed to maintaining our leadership in the quartz devices industry. APPLICATIONS Visit our website www.statek.com KEY FEATURES Cardiac Pacemakers/Defibrillators Ultra Miniature Products Computer/Computer Peripherals Designed and Manufactured in the USA Down Hole Instrumentation Excellent Long-Term Aging Industrial Instrumentation Extreme High Shock Survivability Medical Equipment Full Military Testing Military Devices High Stability and Precision Transponder/Animal Migration Low Power Consumption Wireless/Portable Telecommunications Proven Reliability IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S 10100 - Rev G STATEK PRODUCTS The products designed, developed and manufactured by Statek include a complete range of "Surface Mount" and "Thru-hole" quartz crystals, crystal oscillators and quartz sensors. These rugged, highly reliable, ultra-miniature quartz products are custom laser-tuned to frequencies ranging from 1 Hz to 250 MHz. Statek’s products are ideally suited for Medical, Military, Industrial, Telecommunications and Computer applications. TECHNOLOGICAL CAPABILITY Statek developed the micro-machining process for ultraminiature quartz crystals using photolithographic chemical milling. High-precision laser frequency adjustment and hermetically sealed ceramic packaging contribute to Statek’s proven quality and reliability. Low power consumption, tight calibration and high frequency/temperature stability are some of the features that make Statek’s products the preferred choice of engineers worldwide. ADVANCED TECHNOLOGY The frequency management market constantly demands higher fundamental frequency products, smaller physical size and increased ruggedness. Statek’s R&D constantly pioneers new products that meet these ongoing challenges. IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S 10100 - Rev G SURFACE MOUNT CRYSTAL SELECTION GUIDE – 10 kHz to 250 MHz Available Frequency Range Terminations (Quartz Design) CX1 XX SXX 8.00mm 3.56mm 1.65mm SM1 SM2 SM3 SM4 SM5 10 kHz to 600 kHz (Tuning Fork) 530 kHz to 2.1 MHz (Extensional) 10121 CX1VSM TF 10122 CX1HSM TF 10129 CX1SM EXT 8 MHz to 250 MHz (AT Fundamental*) 10107 CX1SM AT 10108 CX1HGSM AT SM1 SM2 SM3 SM4 SM5 16 kHz to 600 kHz (Tuning Fork) 760 kHz to 1.35 MHz (Extensional) 10134 CX2VSM TF 10137 CX2HSM TF 10135 CX2SM EXT 9.6 MHz to 250 MHz (AT Fundamental*) 18 kHz to 600 kHz (Tuning Fork) 800 kHz to 1.35 MHz (Extensional) 10136 CX2SM AT NOTE: HIGH SHOCK (HG) VERSION AVAILABLE CX2 6.60mm XX SXX 2.39mm 1.65mm CX3 6.68mm XX SXX 2.46mm 1.35mm CX4 XX SXX 1.83mm SM1 SM2 SM3 SM4 SM5 10120 CX3SM AT 14 MHz to 250 MHz (AT Fundamental) 14 MHz to 50 MHz (High Shock) 10150 CX4SM AT SM1 SM2 SM3 SM4 SM5 18 kHz to 600 kHz (Tuning Fork) 800 kHz to 1.35 MHz (Extensional) 10132 CX6VSM TF 9.6 MHz to 250 MHz (AT Fundamental*) 10117 CX6SM AT SM1 SM2 SM3 SM4 SM5 80 kHz to 160 kHz (Tuning Fork) 10152 CX7VSM TF 14 MHz to 250 MHz (AT Fundamental) 10155 CX7SM AT SM1 SM2 SM3 SM4 SM5 150 kHz to 205 kHz (Tuning Fork) Contact Factory SM1 SM2 SM3 SM4 SM5 32 kHz to 160 kHz (Tuning Fork) 10157 CX9VSM TF 14 MHz to 250 MHz (AT Fundamental) 10158 CX9SM AT SM1 SM2 SM3 SM4 SM5 100 kHz to 180 kHz (Tuning Fork) Contact Factory SM1 SM2 SM3 SM4 SM5 12 MHz to 50 MHz (AT Fundamental) Contact Factory 1.14mm NOTE: HIGH SHOCK (HG) VERSION AVAILABLE CX6 6.73mm XX SXX 2.62mm 0.99mm CX7 4.00mm XX SXX 1.83mm 1.14mm CX8 6.60mm 2.39mm 1.65mm CX9 4.10mm 1.50mm 0.89mm CX11 3.20mm 1.50mm 0.87mm CX14 3.20mm 2.50mm 0.60mm 10104 CX3VSM TF 10146 CX3HSM TF 10123 CX3SM EXT 9.6 MHz to 250 MHz (AT Fundamental*) 30 kHz to 250 kHz (Tuning Fork) 600 kHz to 2.5 MHz (Extensional) SM1 SM2 SM3 SM4 SM5 5.00mm Reference Data Sheets 10103 CX4VSM TF 10161 CX4 EXT 10165 CX4HGSM AT 10133 CX6SM EXT 1 MHz to 1.35 MHz (Extensional) IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 C ERT I F I C TEM AT N IO S 10100 - Rev G SURFACE MOUNT OSCILLATOR SELECTION GUIDE - 1 Hz to 170 MHz CXO 3 0 023 M 0 . T60 10.16mm 2 Model 2 3 4 1 1 4 6.50mm Frequency Range Reference Data Sheet 4-pad Ceramic SMD 3.3V or 5V operation 300 kHz to 10106 CMOS/TTL compatible 170 MHz Enable/Tri-state output CXOM CXOMHG 4-pad Ceramic SMD 5V operation 300 kHz to CMOS/TTL compatible 120 MHz Enable/Tri-state output CXO3M CXO3MHG 4-pad Ceramic SMD 32.768 kHz, 10126 3.3V operation CMOS/TTL compatible 300 kHz to 10172 Enable/Tri-state output 170 MHz LSM 4-pad Ceramic SMD 3.3V or 5V operation CMOS compatible Tri-state output (optional) Lowest current Highest accuracy & stability 30 kHz to 250 kHz 10151 700 kHz to 2.1 MHz 10154 32.768 kHz 10153 10 kHz to 2 MHz 10143 1.30mm CXOM GM M 4.19 Features CXO TOP 4.57mm Package Configuration 2 3 1 4 TOP 1.30mm 5.00mm 10116 10160 NOTE: HIGH SHOCK (HG) m VERSION AVAILABLE LSM/LSC TOP 2 3 1 4 10.20mm 1.80mm LSM 1.65mm LSC 4.50mm LSC 4-pad Ceramic SMD 3.3V or 5V operation CMOS compatible Tri-state output (optional) Lowest current SQXO2SM 24-pad LCC 5V operation CMOS/TTL compatible X XX SX SQXO2SM/DQXO3SM X XXX SM 2 O SQX 2MHz 3 10.20mm TOP SQXO2ATSM 24-pad LCC 3.3V or 5V operation 300 kHz to 10158 CMOS/TTL compatible 120 MHz High frequency (AT) DQXO3SM 24-pad LCC 3.3V or 5V operation 1 Hz to CMOS/TTL compatible 10 kHz Low frequency HGXO 4-pad Ceramic SMD 1.8V to 5V operation 460 kHz to 10156 CMOS/TTL compatible 50 MHz Extreme high shock survivability up to 100,000 g Highest accuracy and stability CXOX 4-pad Ceramic SMD 1.8V to 5V operation 1 MHz to CMOS/TTL compatible 160 MHz Enable/Tri-state output 10.20mm /DQXO 3 SM 22 24 1 2 3 4 8 17 10144 10 1.80mm HGXO 7.50mm 5.00mm 2 3 1 4 TOP 2.50 MAX. CXOX 3.20mm 2.50mm 10168 1.00mm PACKAGING OPTIONS FOR SHIPMENTS OF SURFACE SURFACE MOUNT (SM) PACKAGE TERMINATION GUIDE MOUNT CRYSTALS, OSCILLATORS AND SENSORS Tray Pack Tape and Reel* * Please contact factory for specific “Tape and Reel” packaging information PACKAGING OPTIONS FOR SHIPMENTS OF THRU-HOLE CRYSTALS, OSCILLATORS AND SENSORS Designation Termination Maximum Process Temperature SM1 SM2 SM3 SM4 SM5 Gold Plated Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) 2600C for 20 sec. 2600C for 20 sec. 2600C for 20 sec. 2600C for 20 sec. 2600C for 20 sec. All orders = Tray Pack or Tube IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com Y 90 01 C ERT I F I C AT N IO S 10100 - Rev G EM ST THRU-HOLE OSCILLATOR SELECTION GUIDE – 1 Hz to 120 MHz LXO/LXO1/LXOAT X XXX Hz .0M -70 LX0 6.10 mm MAX 12.95 mm MAX 1 7 14 8 20.57 mm MAX Model Features Package Configuration Frequency Range Reference Data Sheet LXO 4-pin DIP 2.5V to 15V operation CMOS compatible Low current Wide supply voltage range 10 kHz to 2.1 MHz 10110 LXO1 4-pin DIP 3.3V or 5V operation CMOS compatible Very low current Tri-state output (optional) 10 kHz to 2.1 MHz 10112 LXOAT 4-pin DIP 3.3V or 5V operation CMOS/TTL compatible High frequency (AT) Enable/Tri-state output (optional) High accuracy & stability 300 kHz to 10111 120 MHz LXOM 1/2 size 4-pin DIP 3.3V or 5V operation CMOS compatible Low current Tri-state output (optional) 10 kHz to 2.1 MHz LXOMAT 1/2 size 4-pin DIP 3.3V or 5V operation CMOS/TTL compatible Enable/Tri-state output (optional) High frequency (AT) High accuracy & stability 300 kHz to 10118 120 MHz SQXO2 3-pin TO-39 3.3V or 5V operation CMOS/TTL compatible Low current High accuracy & stability 10 kHz to 2.1 MHz SQXO2AT 3-pin TO-39 3.3V or 5V operation CMOS/TTL compatible High Frequency (AT) High accuracy & stability 300 kHz to 10128 120 MHz LQXO4 3-pin TO-39 3.3V or 5V operation CMOS compatible Very low current Fast rise & fall times Highest accuracy & stability 32 kHz to 200 kHz 10141 DQXO3 3-pin TO-39 3.3V or 5V operation CMOS compatible Multiple outputs available (6-pin) Low current/low frequency 1 Hz to 10 kHz 10142 VOLTAGE OPTIONS DOWN TO 1.5V AVAILABLE LXOM/LXOMAT 5.72 mm MAX GM .0M 0 T2 1 4 8 5 12.83 mm MAX 12.83 mm MAX VOLTAGE OPTIONS DOWN TO 1.5V AVAILABLE SQXO2/LQXO4/DQXO3 5.08 mm REF 2 1 9.65 mm MAX 3 4.70 mm MAX 12.70 mm MIN OCXO/TCXO/VCXO S T* Model S=Special or custom design. Blank if std. E = Enable T = Tri-State N= Neither SM3 32.0M 100** Frequency K = kHz M = MHz H = Hz Calibration Tolerance @25ºC (in ppm) Blank= All leaded parts or SM1 Gold Plated (standard) SM3 = Solder Dipped SM5 = Solder Dipped (Lead Free) / **Other calibrations available: indicate your requirement in ppm. 100*** / Frequency Stability over Temp. Range NOTE: Example only. For specific ordering requirements, call us at 714-639-7810. 200*** Total Frequency Tolerance / I Temp. Range C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Specify ***Required for AT only. 10100 - Rev G IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S *Not required on all models. 10131 PLEASE CONTACT OUR SISTER COMPANY: GREENRAY INDUSTRIES, TEL: 717-766-0223 FAX: 717-790-9509 / WEBSITE: WWW.GREENRAYINDUSTRIES.COM ORDERING OPTIONS FOR STATEK QUARTZ CRYSTAL OSCILLATORS CXO 10145 STATEK’S COMMITMENT TO QUALITY It is the policy of Statek Corporation to provide its customers with products and services that meet or exceed their expectations. The entire organization is committed to ensuring that customer satisfaction is achieved at all times. Striving for "Total Continuous Improvement", Statek has developed the "Road to Excellence" quality model, which incorporates both the "ISO 9001 Standards" and the "Total Quality Management" programs. Contact STATEK CORPORATION for custom circuit design assistance, circuit analysis, samples, pricing and delivery. THRU-HOLE CRYSTAL SELECTION GUIDE – 10 kHz to 250 MHz CX1 -03 SIDE LEAD 8.00mm Available Terminations Frequency Range (Quartz Design) Reference Data Sheets 03 10 kHz to 600 kHz (Tuning Fork) 530 KHz to 2.1 MHz (Extensional) 10101 CX1V TF 10102 CX1H TF 10130 CX1 EXT 8 MHz to 250 MHz (AT Fundamental*) 10127 CX1 AT 7.62mm 3.56mm 1.78mm *For third overtone contact factory for availability CX2 -02 END LEAD -03 SIDE LEAD 5.0 5.08mm 02 03 04 2mm 1.27mm 16 kHz to 600 kHz (Tuning Fork) 760 KHz to 1.35 MHz (Extensional) 10138 CX2V TF 10139 CX2 EXT 9.6 MHz to 250 MHz (AT Fundamental*) 10140 CX2 AT -04 SIDE LEAD *For third overtone contact factory for availability 2.54mm Statek offers a selection of temperature and custom force sensor elements to meet your specific design applications. These sensor elements have been designed for highly accurate sophisticated devices in military, space, medical, industrial and research applications. Below are two examples of our temperature sensor elements. TEMPERATURE SENSOR SELECTION GUIDE – 266.144 kHz* *Other frequencies available upon request TS1 Reference CX1 surface mount and leaded package configurations for typical dimensions. TS2 Available Terminations Frequency Range (Quartz Design) Reference Data Sheets 03 SM1 SM2 SM3 SM4 SM5 266.144 kHz* (Tuning Fork) 10162 * Other frequencies available upon request 02 03 04 SM1 SM2 SM3 SM4 SM5 Reference CX2 surface mount and leaded package configurations for typical dimensions. 266.144 kHz* (Tuning Fork) * Other frequencies available upon request ORDERING OPTIONS FOR STATEK QUARTZ CRYSTALS NOTE: CX1 Model V S S=Special or custom design. Blank if std. C SM1 32.0M, 100** C=Ceramic Lid Blank=Glass Lid 02 03 04 SM1 SM2 SM3 SM4 SM5 Frequency K=kHz M=MHz Calibration Tolerance @ 250C (in ppm) Example only. For specific ordering requirements, call us at 714-639-7810. 100*** Frequency Stability Over Temp. Range **Other calibrations available: indicate your requirement in ppm. / 200*** Total Frequency Tolerance / I Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Specify ***Required for AT only. 10100 - Rev G IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S Designate “H” for Series, “V” for Pierce: 10 kHz to 600 kHz Tuning Fork design only. / 10162