GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS 1.5KE6.8 THRU 1.5KE440CA(GPP) 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Breakdown Voltage FEATURES • • • • • • • • • • • 1500 Watts DO-201(DO-27) Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated junction or silastic guard junction (open junction) 1500W peak pulse power capability with a 10/1000μs Waveform, repetition rate (duty cycle): 0.05% Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types Devices with V(BR)≥10V, ID are typically less than 1.0μA High temperature soldering guaranteed: 265℃/10 seconds, 0.375” (9.5mm) lead length, 51bs.(2.3kg) tension 1.0(25.4) MIN .220(5.6) .197(5.0) DIA .375(9.5) .335(8.5) 1.0(25.4) MIN .042(1.06) .038(0.96) DIA Dimensions in inches and (millimeters) MECHANICAL DATA • • 6.8 to 440 Volts Peak Pulse Power Cass: molded plastic body over passivated junction Terminals: plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color bands denotes positive end (cathode) except for bidirectional Mounting Position: any Weight: 0.045 ounces, 1.2 grams DEVICES FOR BIDRECTIONAL APPLICATIONS • • For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5K440 (e.g. 1.5KE6.8C, 1.5KE440CA).Electrical Characteristics apply in both directions. Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Peak Pulse power dissipation with a 10/1000μs waveform (NOTE1) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.1) Steady Stage Power Dissipation at TL=75℃ Lead lengths 0.375”(9.5mm)(Note2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) unidirectional only Maximum instantaneous forward voltage at 100.0A for unidirectional only (NOTE 3) Operating Junction and Storage Temperature Range Symbols Value Unit PPPM IPPM Minimum 400 See Table 1 Watts Amps PM(AV) 5.0 Watts IFSM 200.0 Amps VF TJ, TSTG 3.5/5.0 50 to +150 Volts ℃ Notes: 1. 2. 3. Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig.2 Mounted on copper pads ares of 0.8×0.8”(20×20mm) per Fig 5. VF=3.5 V for devices of V (BR) ≤200V, and VF=5.0 Volts max. for devices of V(BR)＞200v Web Site: www.hkmic.com GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS 1.5KE6.8 THRU 1.5KE440CA(GPP) 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Breakdown Voltage Peak Pulse Power 6.8 to 440 Volts 1500 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE1 Device Type 1.5KE6.8/J 1.5KE6.8A/J 1.5KE7.5/J 1.5KE7.5A/J 1.5KE8.2/J 1.5KE8.2A/J 1.5KE9.1/J 1.5KE9.1A/J 1.5KE10/J 1.5KE10A/J 1.5KE11/J 1.5KE11A/J 1.5KE12/J 1.5KE12A/J 1.5KE13/J 1.5KE13A/J 1.5KE15/J 1.5KE15A/J 1.5KE16/J 1.5KE16A/J 1.5KE18/J 1.5KE18A/J 1.5KE20/J 1.5KE20A/J 1.5KE22/J 1.5KE22A/J 1.5KE24/J 1.5KE24A/J 1.5KE27/J 1.5KE27A/J 1.5KE30/J 1.5KE30A/J 1.5KE33/J 1.5KE33A/J 1.5KE36/J 1.5KE36A/J 1.5KE39/J 1.5KE39A/J 1.5KE43/J 1.5KE43A/J 1.5KE47/J 1.5KE47A/J 1.5KE51/J 1.5KE51A/J 1.5KE56/J 1.5KE56A/J 1.5KE62/J 1.5KE62A/J MIN MAX Test Current at IT (mA) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 7.65 9 9.5 9.9 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18 19 19.8 20.9 21.6 22.8 24.3 25.7 27 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.7 48.5 50.4 53.2 55.8 58.9 7.48 7.14 8.25 7.88 9.02 8.61 10 9.55 11 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22 21 24.2 23.1 26.4 25.2 29.7 28.4 33 31.5 36.3 34.7 39.6 37.8 42.9 41 47.3 45.2 51.7 49.4 56.1 43.6 61.6 58.8 68.8 65.1 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Breakdown Voltage V(BR)(Volts) (Note 1) Stand-off Voltage VWM (Volts) 5.5 5.8 6.05 6.4 6.63 7.02 7.37 7.78 8.1 8.55 8.92 9.4 9372 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53 Maximum Reverse Leakage at VWM ID (μA) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 139 143 128 133 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47 49 43.2 45.2 38.4 40 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 22.1 23.1 20.4 21.4 18.6 19.5 16.9 17.6 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15 14.5 16.2 15.6 17.3 16.7 19 18.2 22 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77 89 85 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.089 0.09 0.09 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.1 0.1 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 Web Site: www.hkmic.com GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS 1.5KE6.8 THRU 1.5KE440CA(GPP) 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Breakdown Voltage Peak Pulse Power 6.8 to 440 Volts 1500 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE 1 (Cont’d) Device Type 1.5KE68/J 1.5KE68A/J 1.5KE75/J 1.5KE75A/J 1.5KE82/J 1.5KE82A/J 1.5KE91/J 1.5KE91A/J 1.5KE100/J 1.5KE100A/J 1.5KE110/J 1.5KE110A/J 1.5KE120/J 1.5KE120A/J 1.5KE130/J 1.5KE130A/J 1.5KE150/J 1.5KE150A/J 1.5KE160/J 1.5KE160A/J 1.5KE170/J 1.5KE170A/J 1.5KE180/J 1.5KE180A/J 1.5KE200/J 1.5KE200A/J 1.5KE220/J 1.5KE220A/J 1.5KE250/J 1.5KE250A/J 1.5KE300/J 1.5KE300A/J 1.5KE350/J 1.5KE350A/J 1.5KE400/J 1.5KE400A/J 1.5KE440/J 1.5KE440A/J MIN MAX Test Current at IT (mA) 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90 95 99 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 25 237 270 285 315 332 360 380 396 418 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 159 175 167 187 179 197 189 220 210 242 231 275 267 330 315 385 368 440 420 484 462 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Breakdown Voltage V(BR)(Volts) (Note 1) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) (Note3) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81 85.5 89.2 94 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 245 284 300 324 342 356 376 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 15.3 16.3 13.9 14.6 12.7 13.3 11.5 12 10.4 10.9 9.5 9.9 8.7 9.1 8 8.4 7 7.2 6.5 6.8 6.1 6.4 5.8 6.1 5.2 5.5 4.4 4.6 4.2 4.4 3.5 3.6 3 3.1 2.6 2.7 2.4 2.5 98 92 105 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.11 Notes:/ (1) (2) (3) (4) V(BR) measured after IT applied for 300ms IT =square wave pulse or equivalent Surge current waveform per Figure 3 and derate per Fig.2 All terms and symbols are consistent with ANSI/IEEE C62.35 For bidirectional type having VWM of 10 volts and less, the l D limit is doubled Web Site: www.hkmic.com GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS 1.5KE6.8 THRU 1.5KE440CA(GPP) 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Breakdown Voltage 6.8 to 440 Volts Peak Pulse Power 1500 Watts RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J PEAK PULSE POWER (PP P ) OR CURRENT(IPP ) DERATING IN PERCENTAGE % FIG.1- PEAK PULSE POWER RATING CURVE PP PM, PEAK PULSE POWER, kW 100 Non-Repetitive Pulse Waveform Shown in Figure 3 TA=25 ℃ 10 1.0 0.1 0.1 μs 10 μs 1.0μs 100μs 10ms 1.0ms t d ,PULSE WIDTH, SEC FIG.2- PULSE DERATING CURVE 100 75 50 25 0 0 25 50 75 125 100 150 200 175 TA , AMBIENT TEMPERATURE (℃) FIG.3- PULSE WAVEFORM FIG.4- TYPICAL JUNCTION CAPACITANCE 10,000 Pulse Width (td)is Defined as the Point Where the Peak Current Decays to 50% of lpp tf=10use Peak Value lppm 100 CJ, CAPACITANCE, pF IPP M, PEAK PULSE CURRENT ,% 150 Half Value-lpp 2 50 0 10/1000usec Waveform as Defined by R.E.A. VR =0 1,000 TJ=25 ℃ f = 1.0MHz Vsig = 50mVp-p 100 VR =RATED Stand-Off Voltage 10 td 0 UNIDIRECTIONAL BIDIRECTIONAL 10 5 3.0 2.0 1.0 4.0 FIG.5- STEADY STATE POWER DERATING CURVE 60 Hz Resistive or induction load L = 0.375" (9.5mm) LEAD LENGTHS 3.75 2.50 0.8×0.8×0.040" (20×20×1mm) COPPER HEAT SINKS 1.25 0 0 25 50 75 100 125 150 TL ,LEAD TEMPERATURE ℃ 175 200 PEAK PEAK FORWARD SURGE CURRENT, AMPERES PM(A V), STEADY STATE POWER DISSIPATION, WATTS t, TIME, ms 5.00 100 V(BR) ,BREALDOWN VOLTAGE, 500 VOLTS FIG.6 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 200 TJ =TJ max 8.3ms Single Half Since-Wave JEDEC Method 100 10 1 Web Site: www.hkmic.com 10 NUMBER OF CYCLES AT 60 Hz 100 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS 1.5KE6.8 THRU 1.5KE440CA(GPP) 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Breakdown Voltage 6.8 to 440 Volts Peak Pulse Power 1500 Watts RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J FIG.8- INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL FIG.7- INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL 100 100 WAVEFORM 8×20 IMPULSE WAVEFORM 10×1000 IMPULSE 1.5KE200 1.5KE100 10 1.5KE75 1.5KE39 2.0 1.5KE33 1.0 1.5KE6.8 1.5KE9.1 1.5KE12 0.2 0.1 1.5KE130 20 1.5KE75 10 1.5KE39 2.0 1.5KE33 1.0 1.5KE6.8 1.5KE9.1 △VC, 1.5KE18 INCREMENTAL CLAMPING VOLTAGE 20 0.2 0.5 1 2.0 10 20 0.1 50 0.5 2.0 1 IPP, PEAK PULSE CURRENT, AMPS 10 50 IPP, PEAK PULSE CURRENT, AMPS FIG.9- INCREMENTAL CLAMPING VOLTAGE CURVE BIDIRECTIONAL FIG.10- INCREMENTAL CLAMPING VOLTAGE CURVE BIDIRECTIONAL 100 100 WAVEFORM 10×100 IMPULSE WAVEFORM 8×20 IMPULSE △ Vc = Vc *V (BR) 1.5KE200C 20 10 1.5KE75C 1.5KE39C 1.5KE30C 2.0 1.5KE15C 1.5KE11C 1.0 1.5KE200C 20 1.5KE75C 10 1.5KE39C 1.5KE30C 1.5KE15C 2.0 1.5KE11C 1.0 1.5KE7.5C △VC, △VC, 1.5KE7.5C INCREMENTAL CLAMPING VOLTAGE △ Vc = Vc *V (BR) INCREMENTAL CLAMPING VOLTAGE 1.5KE200 △ Vc = Vc *V (BR) 1.5KE130 △VC, INCREMENTAL CLAMPING VOLTAGE △ Vc = Vc *V (BR) 0.2 0.1 0.2 0.5 1 2.0 10 20 50 IPP, PEAK PULSE CURRENT, AMPS Web Site: www.hkmic.com 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS 1.5KE6.8 THRU 1.5KE440CA(GPP) 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Breakdown Voltage 6.8 to 440 Volts Peak Pulse Power 1500 Watts RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J FIG.12- BREAKDOWN VOLTAGE TEMPERATURE COEFFICIENT CURVE θv, TEMPERATURE COEFFICIENT- mV℃ FIG.11- INSTANTANEOUS FORWARD VOLTAGE CHARAVTERISTICS CURVE FORWARD CURRENT 100 10 PULSE WIDTH=300μs 1% DUTY CYCLE TJ=25 ℃ 1 0.1 1000 100 UNIDIRECTIONAL 10 1 5 UNIDIRECTIONAL (ONLY ) 0 0.4 0.8 1.2 1.6 BIDIRECTIONAL 2.0 INSTANTANEOUS FORWARD CURRENT AMPERES Web Site: www.hkmic.com 10 20 50 100 200 V(BR) ,BREAKDOWN VOLTAGE, VOLTS 500