RURH15100CC Data Sheet January 2000 File Number 2934.3 15A, 1000V Ultrafast Dual Diode Features The RURH15100CC is an ultrafast dual diode with soft recovery characteristics (trr < 100ns). It has low forward voltage drop and is of silicon nitride passivated ion-implanted epitaxial planar construction. • Ultrafast with Soft Recovery . . . . . . . . . . . . . . . . . . <100ns This device is intended for use as a freewheel/clamping diode and rectifier in a variety of switching power supplies and other power switching applications. Its low stored charge and ultrafast recovery with soft recovery characteristics minimizes ringing and electrical noise in many power switching circuits, reducing power loss in the switching transistors. • Avalanche Energy Rated Applications Formerly developmental type TA09906. • General Purpose Ordering Information Packaging PART NUMBER RURH15100CC PACKAGE • Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175oC • Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000V • Planar Construction • Switching Power Supplies • Power Switching Circuits JEDEC TO-218AC BRAND TO-218AC URH15100C ANODE 1 CATHODE ANODE 2 NOTE: When ordering, use the entire part number. CATHODE (FLANGE) Symbol K A1 A2 Absolute Maximum Ratings (Per Leg) TC = 25oC, Unless Otherwise Specified Peak Repetitive Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRRM Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF(AV) (TC = 142oC) Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFRM (Square Wave 20kHz) Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM (Halfwave, 1 Phase 60Hz) Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Avalanche Energy (See Figures 7 and 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EAVL Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSTG, TJ 1 RURH15100CC UNITS 1000 1000 1000 15 V V V A 30 A 200 A 100 20 -65 to 175 W mJ oC 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 2000 RURH15100CC (Per Leg) TC = 25oC, Unless Otherwise Specified Electrical Specifications SYMBOL TEST CONDITION MIN TYP MAX IF = 15A - - 1.8 V IF = 15A, TC = 150oC - - 1.5 V VR = 1000V - - 100 µA VR = 1000V, TC = 150oC - - 500 µA IF = 1A, t dIF/dt = 100A/µs - - 100 ns IF = 15A, t dIF/dt = 100A/µs - - 125 ns ta IF = 15A, t dIF/dt = 100A/µs - 75 - ns tb IF = 15A, t dIF/dt = 100A/µs - 40 - ns - - 1.5 oC/W VF IR trr RθJC DEFINITIONS VF = Instantaneous forward voltage (pw = 300µs, D = 2%). IR = Instantaneous reverse current. trr = Reverse recovery time at dIF/dt = 100A/µs (See Figure 6), summation of ta + tb. ta = Time to reach peak reverse current at dIF/dt = 100A/µs (See Figure 6). tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 6). RθJC = Thermal resistance junction to case. pw = Pulse width. D = Duty cycle. Typical Performance Curves 200 100 IR , REVERSE CURRENT (µA) IF, FORWARD CURRENT (A) 100 TJ = 175oC TJ = 100oC 10 TJ = 25oC 1 TJ = 175oC 10 TJ = 100oC 1.0 0.1 TJ = 25oC 0.01 0.001 0 0.5 1.0 1.5 2.0 2.5 VF, FORWARD VOLTAGE DROP (V) FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE 2 0 200 400 600 800 1000 VR , REVERSE VOLTAGE (V) FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE RURH15100CC Typical Performance Curves (Continued) IF(AV) , AVERAGE FORWARD CURRENT (A) t, RECOVERY TIMES (ns) 200 150 trr 100 ta 50 tb 0 1 10 16 DC 14 12 SQUARE WAVE 10 8 6 4 2 0 120 20 130 140 150 160 170 180 TC , CASE TEMPERATURE (oC) IF, FORWARD CURRENT (A) FIGURE 3. trr , ta AND tb CURVES vs FORWARD CURRENT FIGURE 4. CURRENT DERATING CURVE Test Circuits and Waveforms VGE AMPLITUDE AND RG CONTROL dIF/dt t1 AND t2 CONTROL IF L DUT CURRENT SENSE RG IF + VGE - IGBT t1 VDD dIF trr dt ta tb 0 0.25 IRM t2 IRM FIGURE 5. trr TEST CIRCUIT FIGURE 6. trr WAVEFORMS AND DEFINITIONS I = 1A L = 40mH R < 0.1Ω EAVL = 1/2LI2 [VR(AVL) /(VR(AVL) - VDD)] Q1 = IGBT (BVCES > DUT VR(AVL)) VAVL L CURRENT SENSE R + VDD IL IL I V Q1 VDD DUT t0 FIGURE 7. AVALANCHE ENERGY TEST CIRCUIT t1 t2 t FIGURE 8. AVALANCHE CURRENT AND VOLTAGE WAVEFORMS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site www.intersil.com 3