BIG SOZA CELL BSOZA401 THRU BSOZA406 VOLTAGE RANGE 100 to 600 Volts CURRENT 40.0 Amperes TECHNICAL SPECIFICATION： FEATURES • • • • .299(7.6) .283(7.2) Low Leakage Low forward voltage drop High current capability High forward surge current capacity DIA MECHANICAL DATA • • • • • 0.086(2.20) 0.078(2.0) Copper slug Technology: cell with vacuum soldered Polarity: blue dots denotes cathode end Mounting Position: Any Weight: 0.0219 ounces, 0.62 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS BSOZA401 Maximum Repetitive Peak Reverse Voltage VRRM 100 200 300 400 600 Volts Maximum RMS Voltage VRMS 70 140 210 280 420 Volts Maximum DC Blocking Voltage VDC 100 200 300 400 600 Volts Maximum Average Forward Rectified Current, At Tc=110℃ BSOZA402 BSOZA403 BSOZA404 BSOZA406 UNIT IO 40.0 Amps IFSM 500 Amps VF 1.08 Volts Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range IR UA 250 RθJC 1.0 ℃/W TJ,TSTG (-65 to +175) ℃ Notes: 1. 5.0 Enough heatsink must be considered in application. Web Site: www.hkmic.com BIG SOZA CELL BSOZA401 THRU BSOZA406 VOLTAGE RANGE 100 to 600 Volts CURRENT 40.0 Amperes RATINGS AND CHARACTERISTIC CURVES BSOZA401 THRU BSOZA406 F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 35 PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) 40 30 20 Single Phase 10 600 8.3ms Single Half Sine-Wave 500 (JEDEC Method) Tj=Tj max 400 300 200 100 1 Cycle Half Wave 60Hz Resistive or Inductive Load 1 2 4 6 8 10 20 40 60 80 100 0.375″(9.5mm) Lead Length NUMBER OF CYCLES AT 60 Hz 0 0 25 50 75 110 100 125 150 175 CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 40 SQUARE WAVE DC 20 0 0 1.0 0.1 0.6 60 10 20 30 40 AVERAGE FORWARD CURRENT, (A) 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) Web Site: www.hkmic.com 50