Electric Double Layer Capacitors (Gold Capacitor) Stacked Coin Type Series : F Low temperature assured product Features ● Endurance : +85 °C 1000 h temperature range : –40 °C to +85 °C ● RoHS compliant ● Category Recommended Applications ● Backup of data/RTC of base station,electronic meter, and industrial equipment Specifications Category temp. range –40 °C to +85 °C Maximum operating voltage 5.5 V.DC Nominal cap.range 0.1 F to 1.0 F Capacitance change ±30 % of initial measured value at +20 °C (at –40 °C) Characteristics at low temperature < 7 times of initial measured value at +20 °C (at –40 °C) Internal resistance After 1000 hours application of 5.5 V.DC at +85 °C, the capacitor shall meet the following limits. Endurance Capacitance change ±30 % of initial measured value Internal resistance < 4 times of initial specified value After 1000 hours storage at +85 °C without load, the capacitor shall meet the specified limits for Endurance. Shelf Life Dimensions in mm(not to scale) 1.2±0.1 5.0±0.3 0.8±0.1 A B – L max. 6±1 5.0 6±1 3.5±0.5 2.5±0.5 0.5±0.1 + 0D max. – Sleeve (Unit : mm) Size D L 13.5 9.5 21.5 9.5 Case code + 01.1±0.05 (Recommended) Characteristics list Maximum operating voltage (V.DC) 5.5 Internal resistance Recommended (Initial specified value) discharge current (Ω)at 1 kHz Min. Mass Case packaging (Reference value) code q’ty (g) (pcs) A 3.3 200 Capacitance (F) Capacitance tolerance (F) 0.10 0.080 to 0.180 < 100 300 µA or less EECF5R5H104N 0.47 0.376 to 0.846 < 75 1 mA or less EECF5R5H474N B 10.0 100 0.68 0.544 to 1.224 < 50 1 mA or less EECF5R5H684N B 10.0 100 1.00 0.80 < 50 1 mA or less EECF5R5H105N B 10.0 100 to 1.80 Parts number Note : Do not use reflow soldering. (IR, Atmosphere heating methods, etc.) Please refer to the page of “Application guidelines”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Jan. 2016