TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH480272T-005-I11Q MASS PRODUCTION CODE : PH480272T-005-I11Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 002 DRAWING NO. (Ver.) : LMD- PH480272T-005-I11Q (Ver.002) PACKAGING NO. (Ver.) : PKG- PH480272T-005-I11Q (Ver.001) Customer Approved Date: Approved Checked Designer 廖志豪 Rex Liao 李厚憲 Sam Lee 黃俊清 Ackey Huang POWERTIP 2009.04.28 □ Preliminary specification for design input ■ Specification for sample approval TW RD APR POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 03/31/2009 01 001 New Drawing. - Ackey 04/27/2009 01 002 New Sample and Modify FPC of T/P. Appendix Ackey Total: 31 Page PH480272T-005-I11Q Page2 SAMPLE Ver.01 SPEC Edi.002 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics Touch Panel Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.3.1 SPI Write 2.3.2 SPI Timing Table 2.4 Color Data Assignment 2.5 Reference Initial code 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：LCM Drawing LCM Packaging Specifications Note : For detailed information please refer to IC data sheet : Primacy(TFT LCD): Himax: HX8257-A PH480272T-005-I11Q Page3 SAMPLE Ver.01 SPEC Edi.002 1. SPECIFICATIONS 1.1 Features Item Standard Value Display Type 480 * 3 (RGB) * 272 Dots LCD Type a-Si TFT , Normally white , Transmissive type Screen size(inch) 4.3 inch Viewing Direction 6 O’clock Color configuration RGB-Strip Backlight Type LED B/L Interface Digital 24-bits RGB HX8257-A Other(controller/driver IC) ROHS 1.2 (Or Compatible IC ) THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : http://www.powertip.com.tw/news/LatestNews.asp Mechanical Specifications Item Standard Value Unit Outline Dimension 105.5(W) x 67.2 (L) x 5.0(H)MAX mm Item Standard Value Unit Viewing Area 96.64 (W) x 55.456 (H) mm Active Area 95.04 (W) x 53.856 (L) mm Item Standard Value Unit Viewing Area 99.5 (W) * 58.0 (L) mm Active Area 97.0 (W) * 55.8 (L) mm LCD panel Touch panel Note : For detailed information please refer to LCM drawing PH480272T-005-I11Q Page4 SAMPLE Ver.01 SPEC Edi.002 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. VDDIO GND=0 -0.3 4.0 VGH-VGL GND=0 -0.3 45.0 Input Voltage*1 Vl - -0.3 VDDIO+0.3 V Operating Temperature TOP - -20 70 °C Storage Temperature TST - -30 80 °C System Power Supply Voltage Unit V *1: PCLK, R0 ~ R7, G0 ~ G7, B0 ~ B7, Hsync, Vsync, DISP 1.4 DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Symbol Condition Min. Typ. Max. Unit - 3.0 3.3 3.6 V VIH - 0.8VDDIO - VDDIO V VIL - 0 - 0.2VDDIO V VDDIO = 3.3 V Pattern= Pattern display - 14 - mA VDDIO = 3.3 V Pattern= black *1 - 16 24 mA Power Supply Voltage VDDIO Input H/L Level Voltage Supply Current IDDIO Note1:Maximum current display PH480272T-005-I11Q Page5 SAMPLE Ver.01 SPEC Edi.002 1.5 Optical Characteristics VDDIO= 3.3 V, Ta=25°C TFT LCD Module Item Symbol Condition Tr+Tf 25℃ - Top θY+ Bottom θY- Left θX- Right Response time Viewing angle Contrast ratio White Color of CIE Coordinate （With B/L） Red Green Blue Typ. Max. unit 36 54 ms - 45 - - 50 - - 50 - θX+ CR X 200 0.28 50 250 0.33 0.38 Y 0.31 0.36 0.41 0.57 0.62 0.67 0.30 0.35 0.40 0.30 0.35 0.40 Y 0.53 0.58 0.63 X 0.10 0.15 0.20 Y 0.08 0.13 0.18 X Y X CR ≥ 10 Ta = 25°C θX , θY = 0° Min. Average Brightness Pattern=white display (With LCD)*1 IV IF= 20 mA 280 340 - Uniformity (With LCD)*2 △B IF= 20 mA 70 - - PH480272T-005-I11Q Page6 Deg. Note 4 Note 3 - Note1 cd/m2 Note1 % Note1 SAMPLE Ver.01 SPEC Edi.002 Note 1: *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1° by Topcon luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Normally White "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr PH480272T-005-I11Q Tf Page7 SAMPLE Ver.01 SPEC Edi.002 Normally Black "Black" "White" "Black" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θX = θY = 0 ° 12H Φ = 180 ° Φ = 270 ° θY - θY + θY + = 9 0 ° θX - = 9 0 ° Y+ X- θX θX + Φ= 90 ° Φ θX + = 9 0 ° X+ Y6 H Φ= 0 ° θY - = 9 0 ° PH480272T-005-I11Q Page8 SAMPLE Ver.01 SPEC Edi.002 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit LED Forward Current IF Ta =25℃ － 25 mA LED Reverse Voltage VR Ta =25℃ － 5 V Power Dissipation PD Ta =25℃ － 525 mW Electrical / Optical Characteristics Item Symbol Forward Voltage Average Brightness (Without LCD &T/P) CIE Color Coordinate (Without LCD &T/P) Conditions Min. Typ. Max. Unit VF － 22.8 － V IV 3850 4250 － cd/m2 X － 0.315 － Y － 0.312 － IF= 20 mA Color PH480272T-005-I11Q － White Page9 SAMPLE Ver.01 SPEC Edi.002 1.7 Touch Panel Characteristics Item Input Method ITO Glass ITO Film Specification Finger or stylus pen. T=0.7mm , 500Ω/□ ±150 Ω T=0.188mm , 450Ω/□ ±150 Ω Anti-Glare Type Operating Temperature -20℃~40℃,90%RH↓,41℃~75℃,60%RH↓(Except for dew gathering.) Storage Temperature Surface Hardness Hitting Durability -40℃~40℃,90%RH↓,41℃~85℃,60%RH↓(Except for dew gathering.) 2H- pressure 500gf , 45deg. 1,000,000 times min. (Tip R 8 mm & R0.8mm) Pen Sliding Durability 100,000 times min. (Tip R0.8mm) Insulation Impedance DC25V 1min,20MΩ↑ Light Transparency Linearity 80%min. ±1.5% (±1.5% After environmental and life test) Linearity Force 130gf less input with stylus pen (R0.8mm) Activation Force 80gf(Typical 20gf) less individual point on with stylus pen(R0.8mm). Bouncing Impact Resistance Flexible Pattern Heat Seal Peeling Strength <10ms No damage when ψ9mm steel ball is dropped on the surface from 30 cm height at 1 time. 500gf/cm ( peeling upward by 90 deg.) Flexible Pattern Bending Bending 3 times by bending radius R1.0 mm. Resistance The requirements in 4-2 shall be satisfied Flexible Pattern Insert/Pull Out Resistance 1times at least. The requirements in 4-2 shall be satisfied. Vibration Resistance Not in operation: The requirements in 3 to 4 shall be satisfied after sweep vibration of 2G 15~55Hz(1 min.) is given for 30 min. each in the directions of X, Y, Z. Package Drop No damage to the product.(1corner edge, 2 ridges, 4 surfaces, drop from 50 cm height) Static load resistance PH480272T-005-I11Q After 4.5Kg load for 1 min is applied to the center area(1.0cm²)of the Touch panel, the requirements in 3 and 4,shall be satisfied. Page10 SAMPLE Ver.01 SPEC Edi.002 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram Pixel1 Line 1 RGB Pixel 480 --------------------------------------------- RGB …………………… …………………… TFT LCD Panel 480RGB X 272 DOTS LED Backlight TP1 1 2 Line 272 RGB --------------------------------------------- RGB FPC (Touch Panel) XL (Y1) YD 3 (X2) XR 4 (Y2) YU (X1) TP2 FPC (Touch Panel) 2 3 4 YU XL YD XR K A CSB VDDIO R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 GND CLK RESETB HSYNC VSYNC SDI SCK GND XR YD XL YU 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 HX8257-A Single Chip Digital Driver (T-CON) 1 PH480272T-005-I11Q Page11 SAMPLE Ver.01 SPEC Edi.002 2.2 Interface Pin Description Pin No. Symbol 1 K Power supply for LED Backlight cathode input 2 A Power supply for LED Backlight anode input 3 CSB 4 VDDIO Digital power 5 R0 Red data bit 0 6 R1 Red data bit 1 7 R2 Red data bit 2 8 R3 Red data bit 3 9 R4 Red data bit 4 10 R5 Red data bit 5 11 R6 Red data bit 6 12 R7 Red data bit 7 13 G0 Green data bit 0 14 G1 Green data bit 1 15 G2 Green data bit 2 16 G3 Green data bit 3 17 G4 Green data bit 4 18 G5 Green data bit 5 19 G6 Green data bit 6 20 G7 Green data bit 7 PH480272T-005-I11Q Function Chip select pin of serial interface. Page12 SAMPLE Ver.01 SPEC Edi.002 Pin No. Symbol 21 B0 Blue data bit 0 22 B1 Blue data bit 1 23 B2 Blue data bit 2 24 B3 Blue data bit 3 25 B4 Blue data bit 4 26 B5 Blue data bit 5 27 B6 Blue data bit 6 28 B7 Blue data bit 7 29 GND Ground 30 CLK Dot data clock 31 RESETB Active low global reset signal input. 32 HSYNC Horizontal sync input 33 VSYNC Vertical sync input 34 SDI Data input pin in serial interface. 35 SCL Clock input pin in serial interface. 36 GND Ground 37 XR Right side of touch panel. 38 YD Bottom side of touch panel. 39 XL Left side of touch panel. 40 YU Up side of touch panel. PH480272T-005-I11Q Function Page13 SAMPLE Ver.01 SPEC Edi.002 2.3 Timing Characteristics Timing Parameters 1 (480RGBx272, TA =25ºC, VDDIO=1.8V to 3.6V, GND= 0V) Parameter Symbol Spec. Min. Typ. Max. Unit Clock cycle fCLK(1) - 9 15 MHz Hsync cycle 1/th - 17.14 - KHz Vsync cycle 1/tv - 59.94 - Hz Horizontal cycle th 525 525 605 CLK Horizontal display period thd 480 480 480 CLK Horizontal front porch thf Horizontal Signal 2 2 82 CLK Horizontal pulse width thp (2) 2 41 41 CLK Horizontal back porch thb(2) 2 2 41 CLK Vertical cycle tv 285 286 511 H(1) Vertical display period tvd 272 272 272 H(1) Vertical front porch tvf 1 2 227 H(1) Vertical pulse width tvp(2) 1 10 11 H(1) Vertical back porch tvb(2) 1 2 11 H(1) Vertical Signal Note: (1) Unit: CLK=1/ fCLK , H=th, (2)It is necessary to keep tvp+tvb=12 and thp+thb=43 in sync mode. DE mode is unnecessary to keep it. PH480272T-005-I11Q Page14 SAMPLE Ver.01 SPEC Edi.002 Timing Chart 1 PH480272T-005-I11Q Page15 SAMPLE Ver.01 SPEC Edi.002 Timing Parameters 2 (TA =25ºC, VDDIO=1.8V to 3.6V, tr (1)=tf (1)=2ns) Parameter Symbol Spec. Min. Typ. Max. Unit DISP setup time tdiss 10 - - ns DISP hold time tdish 10 - - ns Clock period Clock pulse high period Clock pulse low period PWCLK(2) 66.7 - - ns (2) 26.7 - - ns (2) 26.7 - - ns PWH PWL Hsync setup time ths 10 - - ns Hsync hold time thh 10 - - ns Data setup time tds 10 - - ns Data hold time tdh 10 - - ns DE setup time tdes 10 - - ns DE hold time tdeh 10 - - ns Vsync setup time tvhs 10 - - ns Vsync hold time tvhh 10 - - ns Note: (1) tr, tf is defined 10% to 90% of signal amplitude. (2) For parallel interface, maximum clock frequency is 15MHz. PH480272T-005-I11Q Page16 SAMPLE Ver.01 SPEC Edi.002 Timing Chart 2 PH480272T-005-I11Q Page17 SAMPLE Ver.01 SPEC Edi.002 2.3.1 SPI Write Note: The example writes “0x1264h” to register R28h. 2.3.2 SPI Timing Table Parameter Spec. Symbol Unit Min. Typ. Max. Serial Clock Frequency fclk - - 20 MHz Serial Clock Cycle Time tclk 50 - - ns Clock Low Width tsl 25 - - ns Clock High Width tsh 25 - - ns Chip Select Setup Time tcss 0 - - ns Chip Select Hold Time tcsh 10 - - ns Chip Select High Delay Time tcsd 20 - - ns Data Setup Time tds 5 - - ns Data Hold Time tdh 10 - - ns PH480272T-005-I11Q Page18 SAMPLE Ver.01 SPEC Edi.002 2.4 Color Data Assignment PH480272T-005-I11Q Page19 SAMPLE Ver.01 SPEC Edi.002 2.5 Reference Initial code Register(0x0006); Data(0x2020); PH480272T-005-I11Q Page20 SAMPLE Ver.01 SPEC Edi.002 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH480272T-005-I11Q run & Reliability test Inspection NG Shipment Ship out Page21 SAMPLE Ver.01 SPEC Edi.002 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH480272T-005-I11Q Page22 2. Process improvement proposal 4. Education And Training Activities SAMPLE Ver.01 SPEC Edi.002 3.2 Inspection Specification PH480272T-005-I11Q Page23 SAMPLE Ver.01 SPEC Edi.002 PH480272T-005-I11Q Page24 SAMPLE Ver.01 SPEC Edi.002 PH480272T-005-I11Q Page25 SAMPLE Ver.01 SPEC Edi.002 PH480272T-005-I11Q Page26 SAMPLE Ver.01 SPEC Edi.002 PH480272T-005-I11Q Page27 SAMPLE Ver.01 SPEC Edi.002 PH480272T-005-I11Q Page28 SAMPLE Ver.01 SPEC Edi.002 PH480272T-005-I11Q Page29 SAMPLE Ver.01 SPEC Edi.002 4. RELIABILITY TEST 4.1 Ver.03 Reliability Test Condition NO. TEST ITEM TEST CONDITION 1 High Temperature Storage Test Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) Air Discharge: Apply 2 KV with 5 times Discharge for each polarity +/- 4 ESD Test 1. Temperature ambiance : 15℃∼35℃ 2. Humidity relative : 30%∼60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) -20℃ → 5 6 Temperature Cycling Storage Test Vibration Test (Packaged) +25℃ Drop Test (Packaged) → +70℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. 1. Sine wave 10∼55 Hz frequency (1 min) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 7 Contact Discharge: Apply 250 V with 5 times discharge for each polarity +/- Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction :※1 corner / 3 edges / 6 sides each 1times PH480272T-005-I11Q Page30 SAMPLE Ver.01 SPEC Edi.002 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH480272T-005-I11Q Page31 SAMPLE Ver.01 SPEC Edi.002