TECH. CORP. SPECIFICATIONS CUSTOMER : CGB013 SAMPLE CODE : SE1602SRS-009-B02Q MASS PRODUCTION CODE : PE1602SRS-009-B02Q SAMPLE VERSION : 03 SPECIFICATIONS EDITION : 005 DRAWING NO. (Ver.) : LMD- PE1602SRS-009-B02Q (Ver.003) PACKAGING NO. (Ver.) : PKG- PE1602SRS-009-B02Q (Ver.001) Customer Approved Date: Approved Checked Designer 廖志豪 Rex Liao 李厚憲 Sam Lee 林榮鍾 Timter Lin POWERTIP 2009.04.30 □ Preliminary specification for design input ■ Specification for sample approval TW RD APR POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 05/14/2008 01 001 First Drawing (Reference PS1602WRS-009-B-01, Modify B/L) - Timter 06/27/2008 01 002 Modify ICON Appendix Timter 10/30/2008 01 003 First Sample (Modify ICON Position for LCD layout) Appendix Timter 03/05/2009 02 004 Second Sample (Modify Backlight Characteristics) P.11 Timter Third Sample 04/29/2009 03 005 (Modify Background LCD segments,at 50℃/70 hours) Modify 1.5 Optical Characteristics - P.6 Timter Total:25 PE1602SRS-009-B02Q Page2 SAMPLE Ver.03 SPEC Edi.005 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Character Pattern 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty 6. PACKING Specification See Appendix 2 Appendix 1:LCM Drawing Appendix 2:Package Note : For detailed information please refer to IC data sheet : Sitronix --- ST7032i PE1602SRS-009-B02Q Page3 SAMPLE Ver.03 SPEC Edi.005 1. SPECIFICATIONS 1.1 1.2 Features Item Standard Value Display Type 16 Character * 2 Line + 66 ICON LCD Type STN (GRAY), Positive, Transflective Driver Condition LCD Module: 1/17 Duty, 1/5 Bias Viewing Direction 6 O’clock Backlight Type LED (Green) Weight 13.1 g Interface 6800-8bit interface Driver IC ST7032i ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side: http://www.powertip.com.tw/news/LatestNews.asp Mechanical Specifications Item Standard Value Unit Outline Dimension 70.50(L) * 28.50 (w) * 5.80 (H) mm Viewing Area 51.50 (L) * 17.0 (w) mm Active Area 49.10(L) * 14.50 (w) mm Character Size 2.60 (L) * 4.580 (w) mm Character Pitch 3.10 (L) * 5.10 (w) mm Note:For detailed information please refer to LCM drawing. PE1602SRS-009-B02Q Page4 SAMPLE Ver.03 SPEC Edi.005 1.3 1.4 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply Voltage VDD - -0.3 6.0 V LCD Driver Supply Voltage VLCD - Input Voltage VIN - -0.3 VDD +0.3 V Operating Temperature TOP - 0 50 °C Storage Temperature TST - -10 60 °C Storage Humidity HD Ta < 40 °C 20 90 %RH -0.3+Vss 7.0 -Vss V DC Electrical Characteristics VDD = 3.3V ± 0.3, VSS = 0 V, Ta = 25°C Item Symbol Condition Min. Typ. Max. Unit Logic Supply Voltage VDD - 3.0 3.3 3.6 V “H” Input Voltage VIH - 0.7VDD - VDD V “L” Input Voltage VIL - - - 0.2VDD V “H” Output Voltage VOH IOH = -1 mA 0.75VDD - - V “L” Output Voltage VOL IOL = 1 mA - - 0.8 V - 0.5 - mA - 0.5 1.0 mA 0°C; VDD= 3.3V 4.3 4.5 4.7 25°C; VDD= 3.3V 4.3 4.5 4.7 50°C; VDD= 3.3V 4.1 4.3 4.5 Supply Current IDD VDD= 3.3V;VOP = 4.5V; Pattern= Full display VDD= 3.3V;VOP = 4.5V; *1 Pattern= Character Pattern LCM Driver Voltage VOP V NOTE*1:The Maximum current display. PE1602SRS-009-B02Q Page5 SAMPLE Ver.03 SPEC Edi.005 1.5 Optical Characteristics Item Symbol Min. Typ. Max. Unit Reference ms Note2 Deg. Note 1 Rise tr - 80 120 Fall tf - 160 240 Top ΘY+ C>2.0, - 40 - Bottom ΘY- ∅ =270°, - 40 - Left ΘX- - 30 - Right ΘX+ - 35 - - 3 - - Note 3 10 - - cd/m2 - 520 - 530 nm Note A 70 - - % - Response Time Viewing angle range Conditions Contrast Ratio CR Average Brightness (With B/L) *2 IV CIE Color Coordinate (With B/L) *2 λp Uniformity *1 △B θ = 0°, ∅ =270°, IF = 5mA - Note A: 1:△B=B(min) / B(max)*100% 2:Measurement Condition for Optical Characteristics: a:Environment: 25℃±5℃ / 60±20%R.H,no wind,dark room below 10 Lux at typical lamp current and typical operating frequency. b:Measurement Distance: 500 ± 50 ㎜ ,(θ= 0°) c:Equipment: TOPCON BM-7 fast,(field 0.2°),after 10 minutes operation. d:The uncertainty of the C.I.E coordinate measurement ±0.01,Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast 3: This value will be changed while mass production. PE1602SRS-009-B02Q Page6 SAMPLE Ver.03 SPEC Edi.005 Note 1. Optical characteristics-2 Viewing angle Rear (12H) φ=90° Top (θ=0°) θL θR θ+ θ- Left (9H) φ=180° Right (3H) φ=0° Front (6H) φ=270° Viewing angle PE1602SRS-009-B02Q Page7 SAMPLE Ver.03 SPEC Edi.005 Note 2. Optical characteristics-3 Fig.2 Definition of response time Positive Type No selected waveform No selected waveform Selected waveform Transmittance 10% 90% 100% Tf Tr Negative Type No selected waveform No selected Selected waveform Transmittance 100% 90% 10% Tr PE1602SRS-009-B02Q Tf Page8 SAMPLE Ver.03 SPEC Edi.005 Electrical characteristics-2 ※2 Drive waveform Vop: Drive voltage 1/B: Bias N: Duty fF: Frame frequency fD: Drive frequency (1) Selected waveform 1 2 3 N 1 3 2 V Vop/B Vop/B V 1/fD 1/fF (2) Non- Selected wave form 1 2 3 N 1 2 3 (1-2/B)Vop Vop/B Vop/B (1-2/B)Vop 1/fF 1/fD Note: Frame frequency is defined as follows: Common side supply voltage peak - to - peak /2 = 1 period PE1602SRS-009-B02Q Page9 SAMPLE Ver.03 SPEC Edi.005 Note 3. : Definition of Vth Selected waveform 100 73% Transmittance No selected waveform 50% Vth1 Vth2 Drive Active voltage range View direction Drive waveform Transmittance Vth1 10° (Selected waveform) 50% Vth2 40° (No selected waveform) 73% ※1 Contrast ratio = (Brightness in OFF state) / (Brightness in ON state) Outline of Electro-Optical Characteristics Measuring System Photo Detector θ Human Active ψ Temperature Control Chamber LCD Panel Transmissive Measuring System: Autronic DMS-803 PE1602SRS-009-B02Q Page10 SAMPLE Ver.03 SPEC Edi.005 1.6 Backlight Characteristics LCD Module with LED Backlight Maximum Ratings Item Symbol Forward Current IF Reverse Voltage VR Power Dissipation PD Conditions Min. Max. Unit - 5 mA - 5 V - 17.5 mW Ta =25℃ Electrical / Optical Characteristics Item Symbol Forward Voltage Conditions Ta =25℃ Unit Min. Typ. Max. VF 3.1 3.3 3.5 V Average Brightness (Without LCD) *1 IV 50 - - cd/m2 Uniformity *2 (Without LCD) △B 75 - - % CIE Color Coordinate (Without LCD)*1 λp 520 - 530 nm IF=5 mA Color Green *1 This value will be changed while mass production. *2:△B=B(min) / B(max)*100% R A LED K PE1602SRS-009-B02Q Page11 SAMPLE Ver.03 SPEC Edi.005 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram A B/L K ... COMI2 COM 1 9 COM 8 16 Character * 2 Line +66 ICON 8 … COM 9 COM16 SEG1 SEG80 80 SEG1 SEG80 COM9 ST7032i … … COM 1 COM16 COMI2 COM8 XRESET RS RW CSB E DB0-DB7 VSS VDD CAP1P CAP1N VOUT 18 Software: SHLC=0,(COM16~COM1) SHLS=1,(SEG1~SEG80) PE1602SRS-009-B02Q Page12 1 SAMPLE Ver.03 SPEC Edi.005 2.2 Interface Pin Description Pin No. Symbol 1 XRESET 2 RS Function Reset pin, Low active. Select registers. 0:Instruction register (for write) Busy flag & address counter (for read) 1:Data register (for write and read) Chip select in parallel mode and serial interface (Low active). When the CSB in falling edge state (in serial interface), the shift register and the clock counter are reset. 3 CSB 4 RW 5 E 6 DB0 7 DB1 8 DB2 9 DB3 10 DB4 11 DB5 12 DB6 13 DB7 14 VSS Ground. 15 VDD Power supply. 16 VOUT DC/DC voltage converter. Connect a capacitor between this terminal and VIN when the built-in booster is used. 17 CAP1P DC/DC voltage converter. 18 CAP1N DC/DC voltage converter. Select read or write (In parallel mode). 0:Write, 1:Read. Starts data read/write. Four high order bi-directional data bus pins. Used for data transfer and receive between the MPU and the ST7032. Backlight A LED + K LED - PE1602SRS-009-B02Q Page13 SAMPLE Ver.03 SPEC Edi.005 2.3 Timing Characteristics (Ta = -10 ~ 60℃) PE1602SRS-009-B02Q Page14 SAMPLE Ver.03 SPEC Edi.005 2.4 Character Pattern PE1602SRS-009-B02Q Page15 SAMPLE Ver.03 SPEC Edi.005 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Q.A Manufactu Product Inventory Purchase ring control control Survey Request Project evaluation Inquiry Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot run & Reliability test Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PE1602SRS-009-B02Q Inspection NG Shipment Ship out Page16 SAMPLE Ver.03 SPEC Edi.005 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PE1602SRS-009-B02Q Page17 2. Process improvement proposal 4. Education And Training Activities SAMPLE Ver.03 SPEC Edi.005 3.2 Inspection Specification PE1602SRS-009-B02Q Page18 SAMPLE Ver.03 SPEC Edi.005 PE1602SRS-009-B02Q Page19 SAMPLE Ver.03 SPEC Edi.005 PE1602SRS-009-B02Q Page20 SAMPLE Ver.03 SPEC Edi.005 PE1602SRS-009-B02Q Page21 SAMPLE Ver.03 SPEC Edi.005 PE1602SRS-009-B02Q Page22 SAMPLE Ver.03 SPEC Edi.005 PE1602SRS-009-B02Q Page23 SAMPLE Ver.03 SPEC Edi.005 4. RELIABILITY TEST 4.1 Reliability Test Condition Ver.03 NO . TEST ITEM 1 High Temperature Storage Test Keep in +60 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -10 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test 4 ESD Test Keep in +40 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250V with 5 times Discharge for each polarity +/discharge for each polarity +/1.Temperature ambinace:15℃∼35℃ 2.Humidity relative:30%∼60% 3.Energy Storage Capacitance(Cs+Cd):150pF±10% 4.Discharge Resistance(Rd):330Ω±10% 5.Discharge, mode of operation: Single Discharge (time between successive discharges at least 1 s) (Tolerance if the output voltage indication: ±5%) 5 6 Temperature Cycling Storage Test Vibration Test (Packaged) TEST CONDITION 0℃ → +25℃ → +50`℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. 1. Sine wave 10∼55 Hz frequency (1 min) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 7 Drop Test (Packaged) Drop Height (cm) 0 ~ 45.4 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction :※ 1 corner / 3 edges / 6 sides each 1times PE1602SRS-009-B02Q Page24 SAMPLE Ver.03 SPEC Edi.005 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM . 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PE1602SRS-009-B02Q Page25 SAMPLE Ver.03 SPEC Edi.005