TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH320240T-023-I02Q MASS PRODUCTION CODE : PH320240T-023-I02Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 003 DRAWING NO. : LMD-PH320240T-023-I02Q (Ver.001) : PKG-PH320240T-023-I02Q (Ver.001) (Ver.) PACKAGING NO. (Ver.) Customer Approved Date: Approved Checked Designer 黃秋源 Oliver Huang 李健弘 Lambert Lee 黃俊清 Ackey Huang POWERTIP 2013.01.18 □ Preliminary specification for design input ■ Specification for sample approval TW RD APR POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date 12/07/2012 Ver. Edi. 01 Description Page Design by 001 New Drawing. - Ackey - Ackey - Ackey 12/17/2012 01 002 Modify Interface Pin Description (LEDA->A , LEDK->K , Y2->Y+ , X2->X+ , Y1->Y- , X1->X-) 01/17/2013 01 003 New Sample. Total: 26 Page PH320240T-023-I02Q Page2 SAMPLE Ver.01 SPEC Edi.003 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：LCM Drawing LCM Packaging Specifications Note : For detailed information please refer to IC data sheet : Primacy(TFT LCD): Himax: HX8238-D PH320240T-023-I02Q Page3 SAMPLE Ver.01 SPEC Edi.003 1. SPECIFICATIONS 1.1 Features Main LCD Panel Item Standard Value Display Type 320* (R、G、B) * 240 Dots LCD Type Normally white , Transmissive type Screen size(inch) 3.5(Diagonal) Viewing Direction 6 O’clock Color configuration R.G.B. vertical stripe Backlight White LED Interface Digital 24-bits Parallel RGB HSYNC,VSYNC.3Wires SPI Other (controller / driver IC) Himax: HX8238-D THIS PRODUCT CONFORMS THE ROHS OF PTC ROHS 1.2 Detail information please refer web side : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ Mechanical Specifications Item Standard Value Unit Outline Dimension 76.9(W) * 63.9 (L) * 3.2 (H) mm Item Standard Value Unit Active Area 70.08 (W) * 52.56 (L) mm LCD panel Note : For detailed information please refer to LCM drawing PH320240T-023-I02Q Page4 SAMPLE Ver.01 SPEC Edi.003 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit System Power Supply Voltage VDD GND=0 -0.3 4.0 V Booster Reference Supply Voltage VCI GND=0 GND-0.3 3.96 V Operating Temperature TOP - -20 70 °C Storage Temperature TST - -30 80 °C Storage Humidity HD Ta < 60 °C 20 90 %RH 1.4 DC Electrical Characteristics Module GND = 0V, Ta = 25°C Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage VDD - 3.0 3.3 3.6 V Booster Reference Supply Voltage VCI - 3.0 3.3 3.6 V VCOM High Voltage VCOMH - - - 5.54 V VCOM Low Voltage VCOML - -2.8 - - V VIH - 0.8VDD - VDD V VIL - 0 - 0.2VDD V VOH - 0.9VDD - VDD V VOL - - - 0.1VDD V - 9 14 mA Input H/L Level Voltage Output H/L Level Voltage VDD=VCI=3.3V Supply Current IDD Pattern= black*1 Note1: Maximum current display. PH320240T-023-I02Q Page5 SAMPLE Ver.01 SPEC Edi.003 1.5 Optical Characteristics TFT LCD Panel VDD=VCI=3.3V, Ta=25°C Item Symbol Condition Min. Typ. Max. unit - Response time Tr + Tf Ta = 25°C θX, θY = 0° - 35 53 ms Note2 CR ≥ 10 - 60 70 70 70 - CR 200 250 - - Note3 X Y X Y X Y X Y 0.26 0.28 0.57 0.32 0.29 0.56 0.09 0.03 0.31 0.33 0.62 0.37 0.34 0.61 0.14 0.08 0.36 0.38 0.67 0.42 0.39 0.66 0.19 0.13 - Note1 350 400 - 80 - - Viewing angle Top Bottom Left Right Contrast ratio White Color of CIE Coordinate (With B/L ) Red Green Blue θY+ θYθXθX+ Average Brightness Pattern=white display IV Uniformity △B Ta = 25°C θX , θY = 0° Deg. Note4 cd/m2 Note1 IF= 20 mA % Note1 Note1: 1：△B=B(min) / B(max) × 100% 2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast PH320240T-023-I02Q Page6 SAMPLE Ver.01 SPEC Edi.003 Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θX = θY = 0 ° 12H Φ = 180 ° Φ = 270 ° θY - θY + θY + = 9 0 ° θX - = 9 0 ° Y+ X- θX θX + Φ= 90 ° Φ X+ Y6 H Φ= 0 ° θY - = 9 0 ° PH320240T-023-I02Q θX + = 9 0 ° Page7 SAMPLE Ver.01 SPEC Edi.003 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ - 48 mA Power Dissipation PD Ta =25℃ - 540 mW Electrical / Optical Characteristics Item Symbol Conditions Min. Typ. Max. Unit Forward Voltage VF IF= 20 mA - 19.2 21 V Color of CIE Coordinate X 0.28 0.30 0.32 (Without LCD & TP) Y 0.28 0.30 0.32 Color - White Internal Circuit Diagram K PH320240T-023-I02Q A Page8 SAMPLE Ver.01 SPEC Edi.003 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH320240T-023-I02Q Page9 SAMPLE Ver.01 SPEC Edi.003 2.2 Interface Pin Description Pin No. Symbol Function 1 A LED Anode. 2 K LED Cathode. 3 GND Ground. 4 VCI Booster Reference Supply Voltage. 5 ID 6 VDD Power Supply Voltage. 7 GND Ground. 8 RESB Reset. Note1. 9 CSB Chip select Input: CSB = L - selected and accessible. CSB = H - is not selected and not accessible. 10 SCK SPI Clock Input. 11 SDO SPI Data Output. The data is valid on the falling edge of the SCK signal. 12 SDI SPI Data Input. The data is latched on the rising edge of the SCK signal. 13 GND Ground. 14 B0 15 B1 16 B2 17 B3 18 B4 19 B5 20 B6 PH320240T-023-I02Q Graphic display Blue data. Page10 SAMPLE Ver.01 SPEC Edi.003 Pin No. Symbol 21 B7 22 G0 23 G1 24 G2 25 G3 Function Graphic display Blue data. Graphic display Green data. 26 G4 27 G5 28 G6 29 G7 30 R0 31 R1 32 R2 33 R3 34 R4 35 R5 36 R6 37 R7 38 GND Ground. 39 DCLK Video Clock Input. The data is latched on the rising edge of DCLK. 40 HSYNC Horizontal Sync Input. 41 VSYNC Vertical Sync Input. PH320240T-023-I02Q Graphic display Red data. Page11 SAMPLE Ver.01 SPEC Edi.003 Pin No. 42 Symbol DEN Function Video Data Enable Input. VSYNC+HSYNC mode - This pin is shorted to GND normally and the back/front porch is determined by the control register. VSYNC+HSYNC+DE mode The valid data is determined by the VSYNC+HSYNC+DEN pin. DE mode - VSYNC and HSYNC are unused and shorted to GND. The valid input. data is determined by DEN pin. 43 GND 44 SEL0 45 SEL1 46 SEL2 47 Y+ Touch Panel Y_Top. (NC) 48 X+ Touch Panel X_Right.(NC) 49 Y- Touch Panel Y_Bottom. (NC) 50 X- Touch Panel X_Left. (NC) PH320240T-023-I02Q Ground. Note2. Page12 SAMPLE Ver.01 SPEC Edi.003 Note1: ID code Circuit Vendor ID (On FPC, ID resistor as specified in vendor table shall be connected to this pin, and other side of the resistor shall be connected to GND) R1=44.2KΩ Note2: Define the input interface mode PH320240T-023-I02Q Page13 SAMPLE Ver.01 SPEC Edi.003 2.3 Timing Characteristics VSYNC HSYNC DCLK Note：The interface of this module can drive by digital 24-bit data. PH320240T-023-I02Q Page14 SAMPLE Ver.01 SPEC Edi.003 DCLK Data transaction timing in parallel RGB(24 bit)interface (SYNC mode) PH320240T-023-I02Q Page15 SAMPLE Ver.01 SPEC Edi.003 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactur ing Q.A Product control Purchase Inventory control Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH320240T-023-I02Q run & Reliability test Inspection NG Shipment Ship out Page16 SAMPLE Ver.01 SPEC Edi.003 Item Customer Sales Info Claim R&D Q.A Manufactu ring Product control Purchase Inventory control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH320240T-023-I02Q 2. Process improvement proposal 4. Education And Training Activities Page17 SAMPLE Ver.01 SPEC Edi.003 3.2. Inspection Specification PH320240T-023-I02Q Page18 SAMPLE Ver.01 SPEC Edi.003 PH320240T-023-I02Q Page19 SAMPLE Ver.01 SPEC Edi.003 PH320240T-023-I02Q Page20 SAMPLE Ver.01 SPEC Edi.003 PH320240T-023-I02Q Page21 SAMPLE Ver.01 SPEC Edi.003 PH320240T-023-I02Q Page22 SAMPLE Ver.01 SPEC Edi.003 PH320240T-023-I02Q Page23 SAMPLE Ver.01 SPEC Edi.003 PH320240T-023-I02Q Page24 SAMPLE Ver.01 SPEC Edi.003 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) (Ver.B01) TEST CONDITION Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +60℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → +25℃ → +80℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃∼35℃ 2. Humidity relative : 30%∼60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10∼55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PH320240T-023-I02Q Page25 SAMPLE Ver.01 SPEC Edi.003 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully, do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320 ± 10°C and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25°C ± 5°C and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. 5.4.2 Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH320240T-023-I02Q Page26 SAMPLE Ver.01 SPEC Edi.003