Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TH Features ● Guaranteed at 125 °C, 1000h ● RoHS compliance, Halogen free Specifications Size code D2E D2 D3L Category temperature range –55 °C to +125 °C Rated voltage range 2.5 V.DC to 6.3 V.DC 2.5 V.DC to 10 V.DC 4 V.DC to 6.3 V.DC Category voltage range 1.6 V.DC to 4.0 V.DC 1.6 V.DC to 6.3 V.DC 2.5 V.DC to 4.0 V.DC Rated capacitance range 150 µF to 330 µF 68 µF to 220 µF 220 µF to 330 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Surge voltage (V.DC) Rated voltage × 1.15 +125 °C 1000h, category voltage appled Capacitance change Within ±20 % of the initial value Endurance tan d < 2 times of the initial limit DC leakage current < 2 times of the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value Damp heat (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking D4 6.3 V.DC to 10 V.DC 4.0 V.DC to 6.3 V.DC 220 µF to 470 µF Dimensions (not to scale) L D2, D4 Size W D2E, D3L Size Polarity marking(+) R.Cap. code R. Voltage code Lot. No. H Polarity marking(+) R.Cap. code S R. Voltage code R. Voltage (V.DC) Code Lot. No. 2.5 e 4.0 g 6.3 j ✽1 Size code L±0.3 D2E D2 D3L D4 10 A 7.3 7.3 7.3 7.3 S W±0.2 H±0.1 4.3 1.8 4.3 1.9 4.3 2.8 4.3 3.8 ✽ Externals of figure are the reference. Unit : mm W1 ✽2 S±0.2 1.3 1.3 1.3 1.3 W1±0.1 2.4 2.4 2.4 2.4 ✽ 1 ±0.2 : D2 ✽ 2 ±0.2 :D3L, D4 Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (µF) 4.0 THB 6.3 10 THC 2.5 6.3 10 2.5 THE 4.0 6.3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 2.5 4.0 4.0 4.0 6.3 6.3 1.6 4.0 6.3 1.6 1.6 1.6 2.5 2.5 2.5 4.0 4.0 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 330 220 330 470 220 330 220 150 68 330 220 150 Case size (mm) L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 2.8 2.8 3.8 3.8 3.8 3.8 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 Specifications Size Ripple ✽1 ESR ✽2 code current tan d ✽3 (mΩ max.) (mAr.m.s.) D3L D4 D2 D2E 2000 2000 3000 3000 3000 3000 1700 1900 1700 3100 2800 2400 3100 2800 2400 2800 2400 40 40 40 35 40 35 45 40 45 15 18 25 15 18 25 18 25 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Standard LC (µA) Part number Min. Packaging Q'ty (pcs) 132.0 138.6 207.9 296.1 220.0 330.0 55.0 94.5 68.0 82.5 82.5 82.5 88.0 88.0 88.0 94.5 94.5 4THB330ML 6THB220ML 6THB330M 6THB470M 10THB220M 10THB330M 2R5THC220M 6THC150M 10THC68M 2R5THE330MF 2R5THE330MI 2R5THE330M 4THE220MF 4THE220MI 4THE220M 6THE150MI 6THE150M 2500 2500 2000 2000 2000 2000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 ✽4 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015