Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TV Features ● Guaranteed at 85 °C 85 %RH at 125 °C ● RoHS compliance, Halogen free ● Guaranteed Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) D2E D3L –55 °C to +125 °C 6.3 V.DC to 10 V.DC 4.0 V.DC to 6.3 V.DC 68 µF to 150 µF 10 V.DC 6.3 V.DC 150 µF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +125 °C, 1000 h, category voltage applied (+105 °C 2000 h, rated voltage applied) temp. 125 °C 105 °C Capacitance change Within ±20 % of the initial value Within ±20 % of the initial value tan d < 2 times of the initial limit < 1.5 times of the initial limit DC leakage current < 2 times of the initial limit Within the initial limit +85 °C, 85 % to 90 %, 500 h, rated voltage applied Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) L Polarity marking(+) H W R.Cap. code R. Voltage code Lot. No. S W1 S Unit : mm R. Voltage (V.DC) Code 6.3 j Size code L±0.3 D2E 7.3 D3L 7.3 10.0 A W±0.2 ✽1 4.3 4.3 H±0.2 1.8 2.8 S±0.2 1.3 1.3 W1±0.1 2.4 2.4 ✽1 ±0.1 : D2E ✽ Externals of figure are the reference. Characteristics list 105 4.0 125 105 6.3 125 68 7.3 4.3 Specifications Size Ripple ✽1 ESR ✽2 tan d ✽3 H code current (mΩ max.) (mAr.m.s.) 1.8 2400 25 0.10 D2E 1.8 2400 25 0.10 105 6.3 125 150 7.3 4.3 2.8 Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (µF) 6.3 TV 10 Case size (mm) L W 150 7.3 4.3 D3L 2400 25 0.10 Standard 94.5 6TVE150M Min. Packaging Q'ty (pcs) 3000 68.0 10TVE68M 3000 10TVE150ML 2500 ✽4 LC (µA) 150.0 Part number ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015