Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVPD Features ● 125 °C 2000 h ● Guaranteed at 85 °C 85 % ● RoHS compliance, Halogen free Specifications Size code C6 E7 F8 E12 Category temperature range –55 °C to +125 °C Rated voltage range 10 V.DC to 25 V.DC 16 V.DC to 35 V.DC 25 V.DC to 35 V.DC Rated capacitance range 10 µF to 56 µF 8.2 µF to 82 µF 18 µF to 39 µF 22 µF to 47 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +125 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit +85 °C, 85 % to 90 %, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 200 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking F12 47 µF to 82 µF Dimensions (not to scale) 0.2 max. W H fD Polarity marking (−) Lot. No. + L Series Size code C6 E7 F8 E12 F12 R. Capacitance R. Voltage fD±0.5 6.3 8.0 10.0 8.0 10.0 C P – L +0.1 −0.4 5.9 6.9 7.9 11.9 12.6 R Unit : mm W±0.2 H±0.2 C±0.2 R P±0.2 6.6 6.6 7.3 0.6 to 0.8 2.1 8.3 8.3 9.0 0.6 to 0.8 3.2 10.3 10.3 11.0 0.6 to 0.8 4.6 8.3 8.3 9.0 0.8 to 1.1 3.2 10.3 10.3 11.0 0.8 to 1.1 4.6 ✽ Externals of figure are the reference. Characteristics list Rated Rated Series voltage capacitance (V.DC) (µF) 10 16 SVPD 25 35 56 82 10 22 39 47 82 8.2 18 22 47 Case size (mm) fD L 6.3 8.0 6.3 8.0 10.0 8.0 10.0 8.0 10.0 8.0 10.0 5.9 6.9 5.9 6.9 7.9 11.9 12.6 6.9 7.9 11.9 12.6 Specifications Size Ripple ✽1 Allowable ✽1 ✽2 code current ripple current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) (mAr.m.s.) C6 538 1700 45 0.12 E7 670 2120 40 0.12 C6 474 1500 65 0.10 E7 580 1835 48 0.10 F8 664 2100 45 0.10 E12 943 2980 30 0.12 F12 1202 3800 28 0.12 E7 400 1300 70 0.10 F8 550 1800 60 0.10 E12 700 2300 50 0.12 F12 1150 3650 30 0.12 ✽4 LC (µA) 112 262 50 110 195 235 410 57 126 154 329 Standard (Reel size : f380) Min. Part number Packaging Q'ty (pcs) 10SVPD56M 1000 16SVPD82M 1000 25SVPD10M 1000 25SVPD22M 1000 25SVPD39M 500 25SVPD47M 400 25SVPD82M 400 35SVPD8R2M 1000 35SVPD18M 500 35SVPD22M 400 35SVPD47M 400 ✽1 Ripple current (100 kHz/ +105 °C < Tx < 125 °C), Allowable ripple current (100 kHz / Tx < 105 °C) ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015