Conductive Polymer Tantalum Solid Capacitors Mounting specifications <Recommended reflow soldering temperature profile> <Peak temperature 250 °C lead free reflow soldering profile> Temperature on the surface of capacitor reflow soldering Temperature on the surface of capacitor ● Recommendable Peak temperature 5 s max 240 °C 200 °C 40 s max 150 °C 60 s max 30 s max 120 s max Time (sec.) The cycles of reflow soldering : Twice (max) Peak temperature 5 s max 260 °C 217 °C 200 °C 150 °C 60 s max 180 s max 90 s max 6 s max Time (sec.) The model of MSL “2a” is changed into MSL “3” with this reflow condition. 40 s max 180 °C 150 °C 60 s max 120 s max 30 s max Time (sec.) The cycles of reflow soldering : Twice (max) <TQC series> Temperature on the surface of capacitor Temperature on the surface of capacitor <Peak temperature 260 °C lead free reflow soldering profile> Peak temperature 5 s max 250 °C 220 °C Peak temperature 10 s max 250 °C 217 °C 200 °C 180 °C 150 °C 60 s max 120 s max 70 s max Time (sec.) The cycles of reflow soldering : Twice (max) The cycles of reflow soldering : Twice (max) ● Soldering with a soldering iron Tip of a soldering iron : 350 °C max (TQC serise : 400 °C max) Power of a soldering iron : 30 W max Working time : 3 sec. max (TQC serise : 5 sec max) (Do not let the tip of soldering iron touch the POSCAP itself. Do not subject the POSCAP itself to excessive stress when soldering.) Land Pattern b Unit : mm a c a Size code S09 A09, A14 B09, B1, B1G, B15G, B2, B2S D12, D15, D15E, D2E, D2, D3L, D4 a 1.0 1.6 1.6 2.4 b 0.9 1.4 2.7 2.9 c 0.6 1.0 1.4 3.7 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015