2016 Products Catalog Conductive Polymer Tantalum Solid Capacitors 2016.01 http://industrial.panasonic.com/ww/products/capacitors/polymer-capacitors/poscap ——— Notices ——— ■ Applicable Laws and Regulations ● This product complies with the RoHS Directive (Restriction of the use of certain Hazardous substances in electrical and electronic equipment (DIRECTIVE 2011/65/EU). ● No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing this product. ● We do not PBBs or PBDEs as brominated flame retardants. ● Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method, on the occasion of export of this product Thank you for your consideration. ■ Limited applications ● This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home appliances, computers and other office equipment, optical equipment, measuring equipment. ● High reliability and safety are required [ be / a possibility that incorrect operation of this product may do harm to a human life or property ] more. When use is considered by the use, the delivery specifications which suited the use separately need to be exchanged. ——— Items to be observed ——— ● This specification guarantees the quality and performance of the product as individual components. Before use, check and evaluate their compatibility with installed in your products. ● Do not use the products beyond the specifications described in this document. ■ For specifications ● Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other signification damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/ gas equipment, rotating rotating equipment, and disaster/crime prevention equipment. · The system is equipped with a protection circuit and protection device. · The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault. ■ Conditions of use ● Before using the products, carefully check the effects on their quality and performance, and determined whether or not they can be used. These products are designed and manufactured for general-purpose and standard use in general electronic equipment. These products are not intended for use in the following special conditions. (1) In liquid, such as Water, Oil, Chemicals, or Organic solvent. (2) In direct sunlight, outdoors, or in dust. (3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a high concentration corrosive gas, such as Cl2, H2S, NH3, SO2, or NOx. (4) In an environment where strong static electricity or electromagnetic waves exist. (5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near these products. (6) Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin and other material. (7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering. (In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues) (8) Using in the atmosphere which strays Acid or alkaline. (9) Using in the atmosphere which there are excessive vibration and shock. ● Please arrange circuit design for preventing impulse or transitional voltage. Do not apply voltage, which exceeds the full rated voltage when the capacitors receive impulse voltage, instantaneous high voltage, high pulse voltage etc. ● Our products there is a product are using an electrolyte solution. Therefore, misuse can result in rapid deterioration of characteristics and functions of each product. Electrolyte leakage damages printed circuit and affects performance, characteristics, and functions of customer system. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Guidelines and precautions (POSCAP) 1. Circuit design 1.1 Prohibited circuits Since problems can be expected, POSCAP cannot be used on the following circuits (1) High impedance voltage retention circuits (2) Time constant circuits (3) Circuits greatly affected by leakage current (4) The circuit in which two or more POSCAP are connected in a series so as to raise the endurance voltage. 1.2 Failure and life-span The failure rate is 0.5 %✽ / 1000 h (Confidence level : 60 %) based on JIS C 5003. The mainly failure modes are as follows. ✽ B2 size or less : 1.0 % 1.2-1 Contingency failure The main causes of failure are thermal stresses cause by the soldering or thermal use environment, along with heat stresses, electrical stresses or mechanical stresses. The most common failure mode is a short circuit. In case a short circuit occurs, ensure safety by fully considering the followings. (1) If POSCAP emit smoke, turn off the main power of the equipment. In this case, keep your face and hands away from the area. (2) It may take a few seconds to a few minutes before POSCAP emits smoke by the situation. Increase safety by using a protective circuit. (3) If the smoke comes into eyes, rinse immediately. If the smoke is inhaled, gargle immediately. (4) In case a large current continues to flow after a short circuit, in the worst case, the shorted-out section may ignite. For safety, install a redundant circuit or a protective circuit, etc. 1.2-2 Wear-out failure (lifetime) When lifetime exceeded the specified guarantee time of Endurance and Damp heat, electrolyte might insulate and cause electric characteristic changed. This is called an open circuit. The electric characteristics of capacitance and ESR may possibly change within the specified range in specifications when it is used under the condition of the rated voltage, electric and mechanical performance. Please note it when design. 1.3 Reduction of failure stress When POSCAP is used within the rated voltage, it shows a stable characteristic, but it may be damaged in a short circuit when an overvoltage, for instance, is applied. The time to reach the failure mode can be extended by using POSCAP with reduced environment temperature, ripple current and applied voltage. Failure rate In the case of the endurance which is 105 °C 2000 h. 0.5 %/1000 h (Environment temp. : 105 °C, Rated voltage or Category voltage applied) In the case of the endurance which is 105 °C 1000 h or 125 °C 1000 h. 1.0 %/1000 h (Environment temp. : 105 °C, Rated voltage or Category voltage applied) In the case of the endurance which is 85 °C 1000 h. 1.0 %/1000 h (Environment temp. : 85 °C, Rated voltage applied) 1.4 Check the rated performance After checking the operation and installation environments, design the circuit so that it falls within the rated performance range stipulated in this delivery specification. 1.5 Operating temperature and ripple current (a) Set the operating temperature so that it falls within the range stipulated in this delivery specification. (b) Do not apply current that exceeds the allowable ripple current. Ripple current should be controlled so that surface temperature of a capacitor do not exceed the rated temperature. (For questions regarding TQC series, please contact us.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors 1.6 Leakage current Even when the soldering conditions fall within the range of this delivery specifications, leakage current increases a little on occasion. It also increases a little during high temperature storage, high humidity storage and temperature cycling with no voltage applied. In cases such as these, leakage current will decrease by applying voltage under the condition of below the POSCAP's maximum operating temperature. The speed at which the leakage current is restored is increased by applying voltage when the POSCAP's temperature is close to the maximum operating temperature. 1.7 Rapid charge and discharge limitation Rapid charge and discharge are restricted (for maintainance of high-proof reliability). A protective circuit is recommended for when a rapid charge or discharge causes excessive rush current since this is main cause of short circuit and large leakage current. Use a protective circuits in case the rush current value exceeds 20 A✽. Be sure to insert a protection resistor of about 1 kΩ for charge and discharge when measuring the leakage current. ✽ When TH series use under the ambient temperature more than 105 °C : 10 A TPU series : 10 A 2. Mounting 2.1 Protect circuit The failure mode of POSCAP is the short mode. When it breaks down, short electric current flows to it. POSCAP gives off heat by this short current. Do the following consideration in design fully for the safety because it has a bad influence on the part around POSCAP due to this heat. ∙ A protective circuit and a protective device are set up, so as to make the system safer. ∙ A diffuse circuit and so on is set up, so as to make the system safer such as that a machine may not break down as to the single trouble. 2.2 Considerations when soldering The soldering conditions are to be within the range prescribed in this delivery specification. If the specifications are not followed, there is the possibility of degradation of electric characteristic and lifetime when soldering is conducted under conditions that are harsher that those stipulated. 2.3 Others POSCAP’s Electrical characteristics are affected by temperature and frequency fluctuations. Design circuits after checking the amount of fluctuation. 3. Storage It is necessary to set an environment to prevent a trouble at the time of soldering by the degradation of solder ability or moisture's getting into the molding resin when POSCAP are stored. Please make storage of POSCAP sealing up in the reel and storage bag at the time of delivery in the following environment. Also, set storage period as 18 months or shorter. Room temperature and room humidity (generally : 15 to 35 °C, 45 to 75% RH ) are desirable. Place where POSCAP is not exposed by direct sunshine. Please unseal storage bag just before mounting and be conscious that POSCAP in the storage bag is used up. When remainder unfortunately occurs, return them to the storage bag once again and, please seal the unsealed part by adhesive tape etc., including desiccants. Moreover, once and use it in time the storage bag is opened, store POSCAP according to the table's Floor Life “Time” and “conditions”. MSL 2a 3 5 Floor life Time 4 weeks 168 hours 48 hours Conditions < 30 °C/60 %Rh < 30 °C/60 %Rh < 30 °C/60 %Rh (Conform to IPC/JEDEC J-STD-020) ◇ Intellectual property right We, Panasonic Group are providing the product and service that customers can use without anxiety, and are working positively on the protection of our products under intellectual property rights. Representative patents relating to POSCAP are as follows: US Patent Nos. 6168639 and 6313979 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Line up Conductive Polymer Tantalum Solid Capacitors Line up Conductive Polymer Tantalum Solid Capacitors Diagram Conductive Polymer Tantalum Solid Capacitors Explanation of part numbers Part number system Conductive Polymer Tantalum Solid Capacitors Mounting specifications <Recommended reflow soldering temperature profile> <Peak temperature 250 °C lead free reflow soldering profile> Temperature on the surface of capacitor reflow soldering Temperature on the surface of capacitor ● Recommendable Peak temperature 5 s max 240 °C 200 °C 40 s max 150 °C 60 s max 30 s max 120 s max Time (sec.) The cycles of reflow soldering : Twice (max) Peak temperature 5 s max 260 °C 217 °C 200 °C 150 °C 60 s max 180 s max 90 s max 6 s max Time (sec.) The model of MSL “2a” is changed into MSL “3” with this reflow condition. 40 s max 180 °C 150 °C 60 s max 120 s max 30 s max Time (sec.) The cycles of reflow soldering : Twice (max) <TQC series> Temperature on the surface of capacitor Temperature on the surface of capacitor <Peak temperature 260 °C lead free reflow soldering profile> Peak temperature 5 s max 250 °C 220 °C Peak temperature 10 s max 250 °C 217 °C 200 °C 180 °C 150 °C 60 s max 120 s max 70 s max Time (sec.) The cycles of reflow soldering : Twice (max) The cycles of reflow soldering : Twice (max) ● Soldering with a soldering iron Tip of a soldering iron : 350 °C max (TQC serise : 400 °C max) Power of a soldering iron : 30 W max Working time : 3 sec. max (TQC serise : 5 sec max) (Do not let the tip of soldering iron touch the POSCAP itself. Do not subject the POSCAP itself to excessive stress when soldering.) Land Pattern b Unit : mm a c a Size code S09 A09, A14 B09, B1, B1G, B15G, B2, B2S D12, D15, D15E, D2E, D2, D3L, D4 a 1.0 1.6 1.6 2.4 b 0.9 1.4 2.7 2.9 c 0.6 1.0 1.4 3.7 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Packing specifications ● Dimension of carrier tape E (Polarity) D Sprocket hole J Component compartment (−) B C A (+) t F K Size code S09 A09 A14 B09 B1 B1G B15 B15G B2 B2S D12 D15 D15E D2E D2 D3L D4 A±0.1 1.65 2.05 2.05 3.2 3.2 3.25 3.3 3.25 3.3 3.25 4.5 4.5 4.7 4.5 4.5 4.5 4.5 B±0.1 2.4 3.65 3.65 3.8 3.8 3.9 3.8 3.9 3.8 4.0 7.5 7.5 7.8 7.5 7.5 7.7 7.7 G H Direction of unreeling Unit : mm C±0.3 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 D±0.05 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 E±0.1 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 F±0.1 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 G±0.05 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 H±0.1 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 J+0.1 0 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 f1.5 K±0.1 1.3 1.3 1.7 1.4 1.4 1.7 2.1 1.7 2.1 2.1 1.7 2.4 1.7 2.4 2.4 3.2 4.2 t±0.05 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.3 0.3 0.3 0.3 0.3 0.3 0.3 ● Dimension A and B are the measure of compartment's inside bottom. ● The (+) Polarity of the chip is placed on right side towards the unreeling direction. ● Dimension of the topcover tape Thickness of cover tape: 62±10 μm Width of cover tape : 9.5±0.2 mm 5.5±0.2 mm (f180 reel) ● Reel ● Minimum dimension A B C W2 W1 Unit : mm A f330±2 f180 −30 B f80±2 f60±2 C W1 f13.0±0.2 13.5±0.5 f13.0±0.2 9.0±0.5 W2 17.5±1.0 11.4±1.0 packing quantity and weight Size code S09, A09 A14 B09, B1 B1G B15 B15G B2, B2S Quantity (pcs./Reel, f180) Typical weight (g) 3000 200 2500 200 3000 200 2500 200 2000 160 2500 200 2000 200 Size code D12 D15 D15E D2E, D2 D3L D4 Quantity (pcs./Reel, f330) Typical weight (g) 4500 1200 3000 1000 4000 1000 3000 1000 2500 1100 2000 1200 ✽ Small order quantity (500 pcs/reel) is available with TPE, TPF and TQC series. Please contact our sales representative if you prefer it. ● Dimension of packing case ● Units b a c Unit : mm Reel size a b c f180 90 240 240 f330 120 360 360 per packing case Size code S09, A09 A14 B09, B1 B1G B15 B15G B2, B2S Pieces/case 15000 12500 15000 12500 10000 12500 10000 Size code D12 D15 D15E D2E, D2 D3L D4 Pieces/case 22500 15000 20000 15000 12500 10000 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPU Features size, Low profile (L2.0 × W 1.25 × H 0.9 mm) down terminal type ● RoHS compliance, Halogen free ● Small ● Face Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) S09 B09 –55 °C to +85 °C 2.5 V.DC to 10 V.DC 2.5 V.DC to 10 V.DC 4.7 μF to 100 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +85 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) S09 Size B09 Size L Polarity marking(+) R.Cap. code W R.Cap. code R. Voltage code Lot. No. Lot. No. R. Voltage code R. Voltage (V.DC) Code 2.5 e 4.0 g 6.3 j 10.0 A S09 Size R. Cap. (μF) Code 4.7 s 10 A 22 J 47 S B09 Size R. Cap. (μF) Code 150 E8 H Polarity marking(+) 6.3 V.DC 6.3 V.DC 150 μF S 68 W 100 A W1 S Unit : mm Size code L±0.1 ✽1 W±0.1 ✽1 S09 2.0 1.25 B09 3.5 2.8 H±0.1 0.9 0.9 S±0.1 ✽1 W1±0.1 0.5 0.9 0.8 2.2 ✽1 ±0.2 : B09 ✽ Externals of figure are the reference. Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 2.5 4 TPU 6.3 10 85 85 85 85 85 85 85 85 2.5 2.5 4.0 6.3 6.3 6.3 6.3 10.0 85 85 85 85 85 85 85 85 47 100 68 10 22 47 150 4.7 Case size (mm) L W H 2.0 2.0 2.0 2.0 2.0 2.0 3.5 2.0 1.25 1.25 1.25 1.25 1.25 1.25 2.8 1.25 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 Specifications Size Ripple ✽1 ✽2 code current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) 510 150 0.10 510 150 0.10 510 150 0.10 S09 400 250 0.10 510 150 0.10 510 150 0.10 B09 670 100 0.10 S09 360 300 0.10 Standard ✽4 LC (μA) 23.5 50.0 54.4 6.3 27.7 59.2 94.5 4.7 Min. Packaging Q'ty (pcs) 2R5TPU47MSI 3000 ETPU100MSI 3000 4TPU68MSI 3000 6TPU10MSI 3000 6TPU22MSI 3000 6TPU47MSI 3000 6TPU150MBI 3000 10TPU4R7MSI 3000 Part number ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPH Features ● Small size, Low profile (L3.2 × W ● Face down terminal type ● RoHS compliance, Halogen free 1.6 × H 0.9 mm) Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) A09 A14 –55 °C to +105 °C / –55 °C to +85 °C (Rated temp. +85 °C) 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC 33 μF to 100 μF 100 μF to 220 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C, 1000 h rated voltage applied ✽ Rated temp, +85 °C Products : +85 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Within +50 %, −20 % of the initial value (ETPH220MABC) Capacitance change Within +40 %, −20 % of the initial value (Except for above model) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) A09/A14 Size Polarity marking(+) R.Cap. code A09/A14 Size L R.Cap. code Week Week L R. Voltage code S R. Voltage (V.DC) Code 2.5 e 4.0 g 6.3 j 10.0 A R. Cap. (μF) Code 33 N7 47 S7 68 W7 100 A8 S H R. Voltage code W W Year Year A09 Size (6TPH100MAEA) H Polarity marking(+) A09 Size (6TPH100MAEA) W1 S S W1 Unit : mm 150 E8 220 J8 Size code A09 A14 L±0.2 3.2 3.2 W±0.2 1.6 1.6 H±0.1 0.9 1.4 S±0.2 0.8 0.8 W1±0.1 1.2 1.2 ✽ Externals of figure are the reference. Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 2.5 4 TPH 6.3 10 105 85 105 85 105 85 85 85 2.5 2.5 4.0 4.0 6.3 6.3 6.3 10.0 105 85 105 85 105 85 85 85 100 220 68 150 47 100 100 33 Case size (mm) L W H 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 0.9 1.4 0.9 1.4 0.9 0.9 1.4 0.9 Specifications Standard Size Ripple ✽1 ✽2 ✽4 LC code current ESR Part number tan d ✽3 (mΩ max.) (μA) (mAr.m.s.) A09 510 150 0.10 25.0 ETPH100MHA A14 740 70 0.10 110.0 ETPH220MABC A09 510 150 0.10 27.2 4TPH68MHA A14 740 70 0.10 120.0 4TPH150MABC 510 150 0.10 29.6 6TPH47MHA A09 670 100 0.10 63.0 6TPH100MAEA A14 740 70 0.10 126.0 6TPH100MABC A09 510 150 0.10 33.0 ATPH33MAHA Min. Packaging Q'ty (pcs) 3000 2500 3000 2500 3000 3000 2500 3000 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPG Features size, Low profile (L3.5 × W 2.8 × H 1.1 mm) capacitance (220 μF max.) ● RoHS compliance, Halogen free ● Small ● Large Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B1G B15G –55 °C to +105 °C 2.5 V.DC to 12.5 V.DC 2.0 V.DC to 10.0 V.DC 33 μF to 220 μF 2.5 V.DC to 6.3 V.DC 2.0 V.DC to 5.0 V.DC 150 μF to 220 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +85 °C, 1000 h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L R.Cap. code H W Polarity marking(+) R. Voltage code Lot. No. S R. Voltage (V.DC) Code 2.5 e 4.0 g 6.3 j 8.0 k 10.0 A R. Cap. (μF) Code 33 N7 47 S7 100 A8 150 E8 220 J8 12.5 B S W1 Unit : mm Size code B1G B15G L+0.3 −0.1 3.5 3.5 +0.3 W−0.1 2.8 2.8 H±0.1 1.1 1.4 S±0.2 0.8 0.8 W1±0.1 2.2 2.2 ✽ Externals of figure are the reference. Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 2.5 4 TPG 6.3 8 10 12.5 85 85 85 85 85 85 85 85 85 85 85 2.0 2.0 3.2 5.0 5.0 5.0 5.0 5.0 6.3 8.0 10.0 105 105 105 105 105 105 105 105 105 105 105 220 220 100 150 47 47 33 Case size (mm) L W H 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 1.1 1.4 1.4 1.1 1.1 1.1 1.4 1.4 1.1 1.1 1.1 Specifications Size Ripple ✽1 code current (mAr.m.s.) B1G 1000 1400 B15G 1000 1000 B1G 1100 1200 1000 B15G 1200 1000 B1G 1000 1000 ✽2 ESR tan d ✽3 (mΩ max.) 70 30/300 kHz 70 70 55 35/300 kHz 70 35/300 kHz 70 70 70 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Standard Min. Packaging Q'ty (pcs) 55.0 2R5TPG220M 2500 110.0 2R5TPG220MUG 2500 88.0 4TPG220M 2500 63.0 6TPG100M 2500 63.0 6TPG100MG 2500 126.0 6TPG100MZGD 2500 94.5 6TPG150M 2500 189.0 6TPG150MZG 2500 37.6 8TPG47M 2500 47.0 10TPG47M 2500 2500 41.3 12TPG33M ✽4 LC (μA) Part number ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPSF Features ● Super low ESR (6 mΩ max.) low ESL (0.7 nH) ● Face down terminal type ● RoHS compliance, Halogen free ● Super Specifications Size code B2S Category temperature range –55 °C to +105 °C Rated voltage range 2.0 V.DC to 2.5 V.DC Category voltage range 2.0 V.DC to 2.5 V.DC Rated capacitance range 270 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Rated voltage × 1.15 Surge voltage (V.DC) +105 °C, 1000 h rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value Damp heat (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L R.Cap. code R. Voltage (V.DC) Code 2.0 d R. Cap. (μF) Code 270 L8 H W Polarity marking(+) R. Voltage code Lot. No. S 2.5 e W1 S Unit : mm Size code L±0.2 B2S 3.5 W±0.2 2.8 H±0.1 1.9 S±0.3 0.8 W1±0.1 2.2 ✽ Externals of figure are the reference. Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) TPSF 2 2.5 105 2.0 105 105 2.0 105 105 2.5 105 270 270 Case size (mm) L W 3.5 2.8 Specifications Size Ripple ✽1 ESR ✽2 tan d ✽3 H code current (mΩ max.) (mAr.m.s.) 1.9 3200 6/500 kHz 0.08 3.5 2.8 1.9 3.5 2.8 1.9 B2S Standard 108 Min. Packaging Q'ty (pcs) 2TPSF270M6E 2000 ✽4 LC (μA) Part number 2400 9/300 kHz 0.08 108 2TPSF270M9G 2000 3200 6/500 kHz 0.08 135 ETPSF270M6E 2000 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPE Size : B Features ● Small size (L 3.5×W 2.8×H 1.9 mm) ESR (15 mΩ) ● RoHS compliance, Halogen free ● Low Specifications Size code B2 Category temperature range –55 °C to +105 °C Rated voltage range 2.0 V.DC to 10 V.DC Category voltage range 1.8 V.DC to 8.0 V.DC Rated capacitance range 47 μF to 470 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Rated voltage × 1.15 +105 °C, 1000 h rated voltage applied ✽ Rated temp, +85 °C Products : +85 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Surge voltage (V.DC) Endurance tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Within +50 %, −20 % of the initial value (2R5TPE220MAZB (MAPB, MAFB), 2R5TPE330MAZB, Capacitance change 2TPE330MAFB (MADGB), 2TPE470MAJGB (MAFB), 2TPE330MFB) Within +40 %, −20 % of the initial value (Except for above model) Damp heat (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L R.Cap. code W Polarity marking(+) Lot. No. H R. Voltage code R. Voltage (V.DC) Code 2.0 d R. Cap. (μF) Code 47 S7 2.5 e 100 A8 4.0 g 120 C8 6.3 j 150 E8 220 J8 8.0 k 330 N8 10.0 A 470 S8 S S W1 Unit : mm Size code L±0.2 B2 3.5 W±0.2 2.8 H±0.1 1.9 S±0.2 0.8 W1±0.1 2.2 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 2 2.5 TPE 4 105 2.0 105 85 1.8 105 85 1.8 105 85 1.8 105 85 1.8 105 330 470 Case size (mm) L W 3.5 2.8 Specifications Standard Size Ripple ✽1 Min. ✽2 ✽4 ESR LC tan d ✽3 H code current Part number Packaging Q'ty (mΩ max.) (μA) (mAr.m.s.) (pcs) 2000 1.9 2000 15 0.08 132.0 2TPE330MFB 3.5 2.8 1.9 2000 3.5 2.8 1.9 2000 13/300 kHz 3.5 2.8 1.9 2300 3.5 2.8 1.9 2300 11/300 kHz 15 15 132.0 2TPE330MAFB 2000 132.0 2TPE330MADGB 2000 0.10 188.0 2TPE470MAFB 2000 0.08 188.0 2TPE470MAJGB 2000 2000 85 2.0 105 3.5 2.8 1.9 2000 0.08 110.0 2R5TPE220MAFB 105 2.5 105 3.5 2.8 1.9 1800 15/300 kHz 0.08 110.0 2R5TPE220MFGB 2000 105 2.5 105 3.5 2.8 1.9 1700 21 0.08 55.0 2R5TPE220MLB 3.5 2.8 1.9 1600 25 0.08 55.0 2R5TPE220MAPB 2000 3.5 2.8 1.9 1400 35 0.08 55.0 2R5TPE220MZB 2000 1400 35 0.08 55.0 2R5TPE220MAZB 2000 1400 35 0.08 82.5 2R5TPE330MAZB 2000 220 15 0.08 0.10 85 2.0 105 105 2.5 105 85 2.0 105 3.5 2.8 1.9 85 2.0 105 330 3.5 2.8 1.9 105 4.0 105 100 3.5 2.8 1.9 1400 35 0.08 40.0 4TPE100MZB 2000 85 3.2 105 150 3.5 2.8 1.9 1400 35 0.08 60.0 4TPE150MAZB 2000 220 B2 3.5 2.8 1.9 1400 35 0.08 88.0 4TPE220MAZB 2000 3.5 2.8 1.9 1600 25 0.08 63.0 6TPE100MPB 2000 3.5 2.8 1.9 1400 35 0.08 63.0 6TPE100MAZB 2000 3.5 2.8 1.9 1400 35 0.08 75.6 6TPE120MAZB 2000 3.5 2.8 1.9 1600 25 0.08 94.5 6TPE150MAPB 2000 3.5 2.8 1.9 1400 35 0.08 94.5 3.5 2.8 1.9 1400 35 0.10 85 3.2 105 105 6.3 105 85 5.0 105 85 5.0 105 85 5.0 105 85 5.0 105 85 5.0 105 220 8 85 6.3 105 100 3.5 2.8 1.9 1400 35 0.08 10 85 8.0 105 47 3.5 2.8 1.9 1400 35 0.08 6.3 2000 100 120 150 6TPE150MAZB 2000 138.6 6TPE220MAZB 2000 80.0 8TPE100MAZB 2000 47.0 10TPE47MAZB 2000 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPE Size : D Features ● Low profile (Height 1.5 mm max.) ESR (7 mΩ) ● Large capacitance (1500 μF max.) ● RoHS compliance, Halogen free ● Low Specifications Size code D15E Category temperature range D2E D3L D4 –55 °C to +105 °C Rated voltage range 6.3 V.DC 2.5 V.DC to 10 V.DC Category voltage range 5.0 V.DC 2.5 V.DC to 10 V.DC Rated capacitance range 470 μF 68 μF to 470 μF 220 μF to 680 μF 330 μF to 1500 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Rated voltage × 1.15 +105 °C, 2000 h rated voltage applied ✽ Rated temp, +85 °C Products : +85 °C, 1000 h, rated voltage applied 6TPE330MAP, 6TPE470MAZU : +85 °C, 2000 h, Capacitance change Within ±20 % of the initial value Surge voltage (V.DC) Endurance tan d DC leakage current < 1.5 times of the initial limit Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Within +50 %, −20 % of the initial value (2R5TPE220M (I, F, 9), 2R5TPE330M (I, F, C, 9, 7), Capacitance change 2R5TPE470M (I, F, C, 9, 7), 2R5TPE1000MF, 2R5TPE1500M (F, C)) Within +40 %, −20 % of the initial value (Except for above model) Damp heat (Steady State) tan d DC leakage current Marking < 1.5 times of the initial limit < 3 times of the initial limit Dimensions (not to scale) R.Cap. code H Polarity marking(+) W L R. Voltage code Lot. No. S S W1 Unit : mm R. Voltage (V.DC) Code 2.5 e 4.0 g 6.3 j 10.0 A Size code L±0.3 D15E 7.3 D2E 7.3 D3L 7.3 D4 7.3 W±0.2 H±0.2 ✽1 S±0.2 4.3 1.4 1.1 4.3 1.8 1.3 4.3 2.8 1.3 4.3 3.8 1.3 W1±0.1 2.4 2.4 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.1 :D15E, D2E Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 2.5 4 TPE 6.3 10 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 85 85 85 85 105 105 105 85 85 105 105 105 105 105 105 105 105 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.3 6.3 6.3 6.3 6.3 6.3 6.3 5.0 5.0 5.0 5.0 6.3 6.3 6.3 5.0 5.0 6.3 6.3 6.3 6.3 10.0 10.0 10.0 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 220 330 470 680 1000 1500 150 220 330 470 100 150 220 330 470 680 68 220 330 Case size (mm) L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 3.8 3.8 3.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 2.8 2.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 2.8 2.8 2.8 3.8 1.4 3.8 3.8 3.8 3.8 1.8 2.8 2.8 3.8 Specifications Size Ripple ✽1 ✽2 code current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) 3900 9 0.10 3100 15 0.10 2800 18 0.10 2400 25 0.10 4400 7 0.10 3900 9 0.10 3500 12 0.10 15 0.10 D2E 3100 2800 18 0.10 2400 25 0.10 4400 7 0.10 3900 9 0.10 3500 12 0.10 3100 15 0.10 2800 18 0.10 3500 12 0.10 D3L 3100 15 0.10 3900 15 0.15 D4 4400 12 0.15 3900 15 0.15 2800 18 0.10 3100 15 0.10 2800 18 0.10 D2E 2400 25 0.10 2800 18 0.10 2400 25 0.10 3500 12 0.10 3100 15 0.10 D3L 2800 18 0.10 2400 25 0.10 2800 18 0.10 2400 25 0.10 3100 15 0.10 2800 18 0.10 25 0.10 D2E 2400 2800 18 0.10 2400 25 0.10 2400 25 0.10 2400 25 0.10 2400 25 0.10 3900 9/500 Hz 0.10 15 0.10 D3L 3100 2800 18 0.10 2400 25 0.10 D4 4400 10 0.10 D15E 1700 35 0.10 3500 18 0.15 3000 25 0.15 D4 3500 18 0.15 3000 25 0.15 D2E 2400 25 0.10 2800 18 0.10 D3L 2400 25 0.10 D4 3000 25 0.10 Standard LC ✽4 (μA) Part number 55.0 55.0 55.0 55.0 82.5 82.5 82.5 82.5 82.5 82.5 117.5 117.5 117.5 117.5 117.5 170.0 170.0 250.0 375.0 375.0 60.0 88.0 88.0 88.0 132.0 132.0 188.0 188.0 188.0 188.0 63.0 63.0 94.5 94.5 94.5 138.6 138.6 138.6 207.9 207.9 207.9 207.9 207.9 207.9 207.9 296.1 296.1 296.1 428.4 428.4 68.0 220.0 220.0 330.0 2R5TPE220M9 2R5TPE220MF 2R5TPE220MI 2R5TPE220M 2R5TPE330M7 2R5TPE330M9 2R5TPE330MC 2R5TPE330MF 2R5TPE330MI 2R5TPE330M 2R5TPE470M7 2R5TPE470M9 2R5TPE470MC 2R5TPE470MF 2R5TPE470MI 2R5TPE680MCL 2R5TPE680MFL 2R5TPE1000MF 2R5TPE1500MC 2R5TPE1500MF 4TPE150MI 4TPE220MF 4TPE220MI 4TPE220M 4TPE330MI 4TPE330M 4TPE470MCL 4TPE470MFL 4TPE470MIL 4TPE470ML 6TPE100MI 6TPE100M 6TPE150MF 6TPE150MI 6TPE150M 6TPE220MI 6TPE220M 6TPE220MAP 6TPE330MAP 6TPE330MAL 6TPE330MA9EL 6TPE330MFL 6TPE330MIL 6TPE330ML 6TPE330MAA 6TPE470MAZU 6TPE470MI 6TPE470M 6TPE680MI 6TPE680M 10TPE68M 10TPE220MIL 10TPE220ML 10TPE330M Min. Packaging Q'ty (pcs) 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2500 2000 2000 2000 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500 2500 2000 4000 2000 2000 2000 2000 3000 2500 2500 2000 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPF Features ● Super low ESR (5 mΩ max.) capacitance (1000 μF max.) ● RoHS compliance, Halogen free ● Large Specifications Size code D2E D3L Category temperature range D4 –55 °C to +105 °C Rated voltage range 2.0 V.DC 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC Category voltage range 2.0 V.DC 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC Rated capacitance range 220 μF to 330 μF 150 μF to 680 μF 470 μF to 1000 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Surge voltage (V.DC) Rated voltage × 1.15 +105 °C, 2000 h rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Within +50 %, −20 % of the initial value Capacitance change (2TPF220M6, 2TPF330M6, ETPF1000M6H (5H)) Within +40 %, −20 % of the initial value (Except for above model) Damp heat (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L W R.Cap. code H Polarity marking(+) R. Voltage code Lot. No. S S W1 Unit : mm R. Voltage (V.DC) Code 2.0 d 2.5 e 4.0 g 6.3 j 10.0 A Size code L±0.3 D2E 7.3 D3L 7.3 D4 7.3 W±0.2 H±0.2 ✽1 S±0.2 4.3 1.8 1.3 4.3 2.8 1.3 4.3 3.8 1.3 W1±0.1 2.4 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.1 :D2E Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 2 2.5 TPF 4 6.3 10 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 6.3 6.3 6.3 6.3 6.3 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 220 330 330 470 680 1000 330 470 680 220 330 470 150 Case size (mm) L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.8 1.8 2.8 2.8 2.8 2.8 3.8 2.8 2.8 2.8 3.8 3.8 3.8 2.8 2.8 3.8 2.8 2.8 2.8 2.8 3.8 2.8 Specifications Size Ripple ✽1 ✽2 code current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) 4700 6 0.10 D2E 4700 6 0.10 4400 7 0.10 4400 6 0.10 D3L 4400 7 0.10 4400 10 0.10 D4 6100 5 0.10 4400 6 0.10 D3L 4400 7 0.10 4400 10 0.10 6100 5 0.10 6100 5 0.10 D4 5600 6 0.10 4000 12 0.10 D3L 4400 10 0.10 D4 4400 10 0.10 6100 5 0.10 4600 9 0.10 D3L 4000 12 0.10 3900 9 0.10 D4 4400 10 0.10 D3L 3600 15 0.10 Standard LC ✽4 (μA) Part number 88.0 132.0 82.5 117.5 117.5 117.5 117.5 170.0 170.0 170.0 170.0 250.0 250.0 132.0 188.0 272.0 138.6 138.6 138.6 207.9 296.1 150.0 2TPF220M6 2TPF330M6 2R5TPF330M7L 2R5TPF470M6L 2R5TPF470M7L 2R5TPF470ML ETPF470M5H 2R5TPF680M6L 2R5TPF680M7L 2R5TPF680ML ETPF680M5H ETPF1000M5H ETPF1000M6H 4TPF330ML 4TPF470ML 4TPF680MAH 6TPF220M5L 6TPF220M9L 6TPF220ML 6TPF330M9L 6TPF470MAH 10TPF150ML Min. Packaging Q'ty (pcs) 3000 3000 2500 2500 2500 2500 2000 2500 2500 2500 2000 2000 2000 2500 2500 2000 2500 2500 2500 2500 2000 2500 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TA Features ● Guaranteed at 85 °C 85 %RH ● RoHS compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B2 D2E D3L –55 °C to +105 °C 4 V.DC to 10 V.DC 2.5 V.DC to 10 V.DC 4 V.DC to 10 V.DC 2.5 V.DC to 10 V.DC 47μF to 100 μF 68 μF to 470 μF 150 μF to 680 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C, 2000 h, (B2 size : 1000 h) rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +85 °C, 85 % to 90 %, 500 h, rated voltage applied Within +50 %, −20 % of the initial value (2R5TAE470M(F), 2R5TAE330M(F, I), 2R5TAE220M(F, 9)) Capacitance change Within +40 %, −20 % of the initial value (Except for above model) tan d < 1.5 times of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Polarity marking(+) R.Cap. code B2 Size R. Voltage 2.5 4.0 6.3 10.0 (V.DC) Code e g j A Polarity marking(+) R.Cap. code Unit : mm L Size Code B2 D2E D3L W D2E, D3L Size B2 Size R. Voltage code Lot. No. R. Voltage code Lot. No. H R. Cap. 47 68 100 (μF) Code S7 W7 A8 S W1 S ✽1 L±0.3 3.5 7.3 7.3 ✽2 W±0.2 H±0.2 2.8 4.3 4.3 S±0.2 W1±0.1 1.9 1.8 2.8 0.8 1.3 1.3 2.2 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.2 : B2 ✽ 2 ±0.1 : B2, D2E Characteristics list Series Rated Rated Rated Category Category temp. capacitance voltage temp. voltage (°C) (V.DC) (°C) (V.DC) (μF) 2.5 TA 4 6.3 10 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 4.0 4.0 6.3 6.3 6.3 6.3 6.3 6.3 10.0 10.0 10.0 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 220 330 470 680 100 220 470 47 68 150 220 330 47 68 150 220 Case size (mm) L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 3.8 7.3 7.3 7.3 7.3 3.5 3.5 7.3 7.3 7.3 7.3 3.5 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 2.8 4.3 4.3 4.3 4.3 2.8 2.8 4.3 4.3 4.3 4.3 2.8 4.3 4.3 4.3 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 1.9 1.8 1.8 2.8 2.8 1.9 1.9 1.8 1.8 1.8 2.8 1.9 1.8 2.8 2.8 Size code D2E D3L B2 D2E D3L B2 D2E D3L B2 D2E D3L Specifications Ripple ✽1 ESR ✽2 current tan d ✽3 (mΩ max.) (mAr.m.s.) 3900 3100 2400 3100 2800 2400 3100 2400 3100 2400 1100 2800 2400 2800 2400 1100 1100 2400 2800 2400 2400 1100 2400 2400 2400 9 15 25 15 18 25 15 25 15 25 70 18 25 18 25 70 70 25 18 25 25 70 25 25 25 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.08 0.10 0.10 0.10 0.10 0.08 0.08 0.10 0.10 0.10 0.10 0.08 0.10 0.10 0.10 Standard LC ✽4 (μA) Part number Min. Packaging Q'ty (pcs) 110.0 55.0 55.0 82.5 82.5 82.5 117.5 117.5 170.0 170.0 40.0 88.0 88.0 188.0 188.0 29.6 42.8 94.5 138.6 138.6 207.9 47.0 68.0 150.0 220.0 2R5TAE220M9 2R5TAE220MF 2R5TAE220M 2R5TAE330MF 2R5TAE330MI 2R5TAE330M 2R5TAE470MF 2R5TAE470M 2R5TAE680MFL 2R5TAE680ML 4TAB100M 4TAE220MI 4TAE220M 4TAE470MIL 4TAE470ML 6TAB47M 6TAB68M 6TAE150M 6TAE220MI 6TAE220M 6TAE330ML 10TAB47M 10TAE68M 10TAE150ML 10TAE220ML 3000 3000 3000 3000 3000 3000 3000 3000 2500 2500 2000 3000 3000 2500 2500 2000 2000 3000 3000 3000 2500 2000 3000 2500 2500 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TV Features ● Guaranteed at 85 °C 85 %RH at 125 °C ● RoHS compliance, Halogen free ● Guaranteed Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) D2E D3L –55 °C to +125 °C 6.3 V.DC to 10 V.DC 4.0 V.DC to 6.3 V.DC 68 µF to 150 µF 10 V.DC 6.3 V.DC 150 µF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +125 °C, 1000 h, category voltage applied (+105 °C 2000 h, rated voltage applied) temp. 125 °C 105 °C Capacitance change Within ±20 % of the initial value Within ±20 % of the initial value tan d < 2 times of the initial limit < 1.5 times of the initial limit DC leakage current < 2 times of the initial limit Within the initial limit +85 °C, 85 % to 90 %, 500 h, rated voltage applied Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) L Polarity marking(+) H W R.Cap. code R. Voltage code Lot. No. S W1 S Unit : mm R. Voltage (V.DC) Code 6.3 j Size code L±0.3 D2E 7.3 D3L 7.3 10.0 A W±0.2 ✽1 4.3 4.3 H±0.2 1.8 2.8 S±0.2 1.3 1.3 W1±0.1 2.4 2.4 ✽1 ±0.1 : D2E ✽ Externals of figure are the reference. Characteristics list 105 4.0 125 105 6.3 125 68 7.3 4.3 Specifications Size Ripple ✽1 ESR ✽2 tan d ✽3 H code current (mΩ max.) (mAr.m.s.) 1.8 2400 25 0.10 D2E 1.8 2400 25 0.10 105 6.3 125 150 7.3 4.3 2.8 Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (µF) 6.3 TV 10 Case size (mm) L W 150 7.3 4.3 D3L 2400 25 0.10 Standard 94.5 6TVE150M Min. Packaging Q'ty (pcs) 3000 68.0 10TVE68M 3000 10TVE150ML 2500 ✽4 LC (µA) 150.0 Part number ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TQC Size : B Features ● High voltage (35 V.DC max.) compliance, Halogen free ● RoHS Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B15 B2 –55 °C to +105 °C 35 V.DC 35 V.DC 2.7 μF 16 V.DC to 35 V.DC 16 V.DC to 35 V.DC 3.9 μF to 33 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C, 2000 h (16TQC33MYFB : 1000 h), rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L R.Cap. code H W Polarity marking(+) Lot. No. R. Voltage code R. Voltage (V.DC) Code 16 C 20 D 25 E R. Cap. (μF) 2.7 3.9 5.6 8.2 Code L6 Q6 U6 Y6 S W1 Unit : mm 35 V 10 A7 S 15 E7 22 J7 33 N7 Size code L±0.2 B15 3.5 B2 3.5 W±0.2 2.8 2.8 H±0.1 1.4 1.9 S±0.2 0.8 0.8 W1±0.1 2.2 2.2 ✽ Externals of figure are the reference. Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 16 TQC 20 25 35 105 105 105 105 105 105 105 105 105 16.0 16.0 16.0 20.0 20.0 25.0 25.0 35.0 35.0 105 105 105 105 105 105 105 105 105 10 15 33 8.2 22 5.6 15 2.7 3.9 Case size (mm) L W H 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.4 1.9 Specifications Standard Size Ripple ✽1 ✽2 ✽4 LC code current ESR Part number tan d ✽3 (mΩ max.) (μA) (mAr.m.s.) 800 100 0.10 48.0 16TQC10M 1000 90 0.10 72.0 16TQC15M 1000 90 0.10 158.4 16TQC33MYFB 800 100 0.10 49.2 20TQC8R2M B2 1100 90 0.10 132.0 20TQC22MYFB 800 100 0.10 42.0 25TQC5R6M 900 100 0.10 112.5 25TQC15MYFB B15 800 300 0.10 47.3 35TQC2R7MYF B2 500 400 0.10 40.9 35TQC3R9MYF Min. Packaging Q'ty (pcs) 2000 2000 2000 2000 2000 2000 2000 2000 2000 ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TQC Size : D Features ● High voltage (35 V.DC max.) ● RoHS compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) D12 D15 D2 –55 °C to +105 °C 16 V.DC 16 V.DC to 25 V.DC 16 V.DC to 35 V.DC 16 V.DC 16 V.DC to 25 V.DC 16 V.DC to 35 V.DC 33 µF 22 µF to 47 µF 10 µF to 100 µF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking 16 V.DC to 25 V.DC 16 V.DC to 25 V.DC 68 µF to 150 µF Dimensions (not to scale) Unit : mm R.Cap. code L ✽1 Size L±0.2 W±0.2 code D12 7.3 4.3 D15 7.3 4.3 D2 7.3 4.3 D3L 7.3 4.3 Lot. No. R. Voltage code 16 C 20 D H W Polarity marking(+) R. Voltage (V.DC) Code D3L 25 1E S 35 V S W1 ✽2 H±0.1 S±0.2 W1±0.1 1.15 1.4 1.9 2.8 1.3 1.3 1.3 1.3 2.4 2.4 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.3 : D3L ✽ 2 ±0.05 : D12, ±0.2 : D3L Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (µF) 16 TQC 20 25 35 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 20.0 20.0 20.0 20.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 35.0 35.0 35.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 33 47 68 100 150 150 33 47 100 15 22 33 68 10 15 Case size (mm) L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.15 1.9 1.4 1.9 1.9 1.9 1.9 2.8 1.9 1.9 1.9 1.4 2.8 1.9 1.9 1.9 1.9 1.4 1.9 2.8 1.9 1.9 1.9 Specifications Size Ripple ✽1 ✽2 code current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) D12 D2 D15 D2 D3L D2 D15 D3L D2 D15 D2 D3L D2 1800 1400 1500 1800 1450 1500 1800 1800 1500 1400 1450 1500 1700 1500 1000 1500 1400 1400 1400 1400 1000 1000 900 40 70 55 40 55 50 50 50 70 60 55 55 55 45 90 45 60 70 60 70 120 120 150 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Standard LC (µA) Part number Min. Packaging Q'ty (pcs) 52.8 52.8 75.2 75.2 75.2 108.8 160.0 240.0 240.0 66.0 94.0 94.0 200.0 38.0 38.0 55.0 55.0 55.0 82.5 170.0 35.0 35.0 52.5 16TQC33MYFS 16TQC33MYFD 16TQC47MYFT 16TQC47MW 16TQC47MYFD 16TQC68MYF 16TQC100MYF 16TQC150MYF 1CTQC15173F1 20TQC33MYFD 20TQC47MYF 20TQC47MYFT 20TQC100MYF 25TQC15MV 25TQC15MYFD 25TQC22MV 25TQC22MYFD 25TQC22MYFT 25TQC33MYF 25TQC68MYF 35TQC10M 35TQC10MYF 35TQC15MYF 4500 3000 3000 3000 3000 3000 3000 2500 3000 3000 3000 3000 2500 3000 3000 3000 3000 3000 3000 2500 3000 3000 3000 ✽4 ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPB Features ● Standard ● RoHS compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B2 D3L D4 –55 °C to +105 °C 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 33 μF to 68 μF 150 μF to 330 μF 220 μF to 470 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C 2000h, (B2 size : 1000h) rated voltage appled ✽ Rated temp. +85 °C 1000h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) B2 Size L D4 Size Polarity marking(+) R.Cap. code R. Voltage code Lot. No. R. Voltage code Lot. No. H W Polarity marking(+) R.Cap. code S D3L Size R. Voltage (V.DC) 4.0 g Code Polarity marking(+) R.Cap. code 6.3 10.0 j Size code L±0.3 B2 3.5 D3L 7.3 D4 7.3 A B2 Size R. Cap. (μF) 33 N7 Code Lot. No. R. Voltage code 47 68 S7 W7 ✽1 W1 S W±0.2 2.8 4.3 4.3 H±0.2 1.9 2.8 3.8 ✽2 Unit : mm S±0.2 0.8 1.3 1.3 W1±0.1 2.2 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.2 : B2 ✽ 2 ±0.1 : B2 Characteristics list size (mm) (V.DC) Rated 2.0 Category 2.5Category4.0 Rated 6.3Case10.0 定格電圧Rated d voltagee temp. gcapacitance j A voltage temp. Series記号 L W H (V.DC) (°C) (V.DC) (°C) (μF) 4.0 6.3 TPB 10 105 105 105 105 85 105 105 105 105 105 105 105 105 105 4.0 4.0 6.3 6.3 5.0 6.3 6.3 6.3 10.0 10.0 10.0 10.0 10.0 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 68 330 68 220 330 470 33 47 150 220 330 3.5 7.3 3.5 7.3 7.3 7.3 7.3 7.3 3.5 3.5 7.3 7.3 7.3 7.3 2.8 4.3 2.8 4.3 4.3 4.3 4.3 4.3 2.8 2.8 4.3 4.3 4.3 4.3 1.9 2.8 1.9 2.8 2.8 2.8 3.8 3.8 1.9 1.9 2.8 2.8 3.8 3.8 Specifications Size Ripple ✽1 ✽2 code current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) B2 D3L B2 D3L D4 B2 D3L D4 1100 2000 1100 2000 2000 2000 3000 3000 1100 1100 2000 2000 3000 3000 70 40 70 40 40 40 40 35 70 70 40 40 40 35 0.08 0.10 0.08 0.10 0.10 0.10 0.10 0.15 0.08 0.08 0.10 0.10 0.10 0.10 Standard LC (μA) Part number Min. Packaging Q'ty (pcs) 27.2 132.0 42.8 138.6 207.9 207.9 207.9 296.1 33.0 47.0 150.0 220.0 220.0 330.0 4TPB68M 4TPB330ML 6TPB68M 6TPB220ML 6TPB330MAL 6TPB330ML 6TPB330M 6TPB470M 10TPB33M 10TPB47M 10TPB150ML 10TPB220ML 10TPB220M 10TPB330M 2000 2500 2000 2500 2500 2500 2000 2000 2000 2000 2500 2500 2000 2000 ✽4 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPC Features ● Low profile (Height 1.1 mm) compliance, Halogen free ● RoHS Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B1 D2 –55 °C to +105 °C 6.3 V.DC to 12.5 V.DC 5.0 V.DC to 10.0 V.DC 10 μF to 47 μF 6.3 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 68 μF to 330 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C 2000h, (B1 size : 1000h) rated voltage appled ✽ Rated temp. +85 °C 1000h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) B1 Size D2 Size L Polarity marking(+) R.Cap. code R.Cap. code R. Voltage code Lot. No. H W Polarity marking(+) Lot. No. R. Voltage code S R. Voltage (V.DC) Code 6.3 j 8.0 k 10.0 A 12.5 B 10 A7 15 E7 22 J7 33 N7 W1 Unit : mm Size code B1 Size R. Cap. (μF) Code S B1 D2 47 S7 L±0.2 3.5 7.3 W±0.2 2.8 4.3 H±0.1 1.1 1.9 S±0.2 0.8 1.3 W1±0.1 2.2 2.4 ✽ Externals of figure are the reference. Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 6.3 TPC 8.0 10 12.5 85 85 105 105 85 85 105 105 105 85 85 5.0 5.0 6.3 6.3 5.0 6.3 8.0 10.0 10.0 10.0 10.0 105 105 105 105 105 105 105 105 105 105 105 47 100 150 330 22 150 68 100 10 15 Case size (mm) L W H 3.5 3.5 7.3 7.3 7.3 3.5 7.3 7.3 7.3 3.5 3.5 2.8 2.8 4.3 4.3 4.3 2.8 4.3 4.3 4.3 2.8 2.8 1.1 1.1 1.9 1.9 1.9 1.1 1.9 1.9 1.9 1.1 1.1 Specifications Size Ripple ✽1 ✽2 LC ✽4 code current ESR tan d ✽3 (mΩ max.) (μA) (mAr.m.s.) 1100 55 0.10 29.6 B1 1000 70 0.10 29.6 D2 1700 45 0.10 63.0 D2 1900 40 0.10 94.5 D2 1900 40 0.10 207.9 B1 1000 70 0.10 17.6 D2 1900 40 0.10 120.0 D2 1700 45 0.10 68.0 D2 1700 45 0.10 100.0 B1 800 80 0.10 12.5 B1 800 80 0.10 18.8 Standard Part number 6TPC47M 6TPC47MB 6TPC100M 6TPC150M 6TPC330MA 8TPC22M 8TPC150M 10TPC68M 10TPC100M 12TPC10M 12TPC15M Min. Packaging Q'ty (pcs) 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TH Features ● Guaranteed at 125 °C, 1000h ● RoHS compliance, Halogen free Specifications Size code D2E D2 D3L Category temperature range –55 °C to +125 °C Rated voltage range 2.5 V.DC to 6.3 V.DC 2.5 V.DC to 10 V.DC 4 V.DC to 6.3 V.DC Category voltage range 1.6 V.DC to 4.0 V.DC 1.6 V.DC to 6.3 V.DC 2.5 V.DC to 4.0 V.DC Rated capacitance range 150 µF to 330 µF 68 µF to 220 µF 220 µF to 330 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Surge voltage (V.DC) Rated voltage × 1.15 +125 °C 1000h, category voltage appled Capacitance change Within ±20 % of the initial value Endurance tan d < 2 times of the initial limit DC leakage current < 2 times of the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value Damp heat (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking D4 6.3 V.DC to 10 V.DC 4.0 V.DC to 6.3 V.DC 220 µF to 470 µF Dimensions (not to scale) L D2, D4 Size W D2E, D3L Size Polarity marking(+) R.Cap. code R. Voltage code Lot. No. H Polarity marking(+) R.Cap. code S R. Voltage code R. Voltage (V.DC) Code Lot. No. 2.5 e 4.0 g 6.3 j ✽1 Size code L±0.3 D2E D2 D3L D4 10 A 7.3 7.3 7.3 7.3 S W±0.2 H±0.1 4.3 1.8 4.3 1.9 4.3 2.8 4.3 3.8 ✽ Externals of figure are the reference. Unit : mm W1 ✽2 S±0.2 1.3 1.3 1.3 1.3 W1±0.1 2.4 2.4 2.4 2.4 ✽ 1 ±0.2 : D2 ✽ 2 ±0.2 :D3L, D4 Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (µF) 4.0 THB 6.3 10 THC 2.5 6.3 10 2.5 THE 4.0 6.3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 2.5 4.0 4.0 4.0 6.3 6.3 1.6 4.0 6.3 1.6 1.6 1.6 2.5 2.5 2.5 4.0 4.0 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 330 220 330 470 220 330 220 150 68 330 220 150 Case size (mm) L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 2.8 2.8 3.8 3.8 3.8 3.8 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 Specifications Size Ripple ✽1 ESR ✽2 code current tan d ✽3 (mΩ max.) (mAr.m.s.) D3L D4 D2 D2E 2000 2000 3000 3000 3000 3000 1700 1900 1700 3100 2800 2400 3100 2800 2400 2800 2400 40 40 40 35 40 35 45 40 45 15 18 25 15 18 25 18 25 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Standard LC (µA) Part number Min. Packaging Q'ty (pcs) 132.0 138.6 207.9 296.1 220.0 330.0 55.0 94.5 68.0 82.5 82.5 82.5 88.0 88.0 88.0 94.5 94.5 4THB330ML 6THB220ML 6THB330M 6THB470M 10THB220M 10THB330M 2R5THC220M 6THC150M 10THC68M 2R5THE330MF 2R5THE330MI 2R5THE330M 4THE220MF 4THE220MI 4THE220M 6THE150MI 6THE150M 2500 2500 2000 2000 2000 2000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 ✽4 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TC Features ● Guaranteed ● RoHS at 125 °C compliance, Halogen free Specifications Size code D2E D3L Category temperature range D4 –55 °C to +125 °C Rated voltage range 4 V.DC to 6.3 V.DC 2.5 V.DC to 10 V.DC Category voltage range 3.2 V.DC to 5.0 V.DC 2.0 V.DC to 8.0 V.DC Rated capacitance range 100 µF to 330 µF 150 µF to 680 µF 330 µF to 1000 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Rated voltage × 1.15 Surge voltage (V.DC) +125 °C, 1000 h Category temperature range voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 2 times of the initial limit DC leakage current < 2 times of the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Damp heat (Steady State) tan d Within +50 %, −20 % of the initial value (ETCF1000M6H (5H)) Within +40 %, −20 % of the initial value (Except for above model) < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L W Lot. No. H Polarity marking(+) R.Cap. code R. Voltage code S S W1 Unit : mm R. Voltage (V.DC) Code 2.5 e 4.0 g 6.3 j 10.0 A Size code L±0.3 D2E 7.3 D3L 7.3 D4 7.3 W±0.2 H±0.2 ✽1 S±0.2 4.3 1.8 1.3 4.3 2.8 1.3 4.3 3.8 1.3 W1±0.1 2.4 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.1 : D2E Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (µF) 2.5 4 TCE 6.3 10 2.5 TCF 4 6.3 10 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 2.0 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 8.0 8.0 8.0 2.0 2.0 2.0 2.0 2.0 2.0 3.2 3.2 3.2 5.0 5.0 5.0 5.0 5.0 10.0 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 680 1000 150 220 330 470 100 150 220 330 470 680 220 330 680 1000 330 470 680 220 330 470 150 Case size (mm) L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 2.8 2.8 3.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 2.8 2.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 2.8 3.8 3.8 3.8 3.8 2.8 2.8 3.8 2.8 2.8 2.8 3.8 3.8 3.8 2.8 2.8 3.8 2.8 2.8 2.8 2.8 3.8 2.8 Specifications Size Ripple ✽1 ✽2 code current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) 3500 12 0.10 D3L 3100 15 0.10 D4 3900 15 0.15 2800 18 0.10 3100 15 0.10 2800 18 0.10 D2E 2400 25 0.10 2800 18 0.10 2400 25 0.10 3500 12 0.10 3100 15 0.10 D3L 2800 18 0.10 2400 25 0.10 2800 18 0.10 2400 25 0.10 3100 15 0.10 18 0.10 D2E 2800 2400 25 0.15 2800 18 0.15 2400 25 0.15 3100 15 0.10 D3L 2800 18 0.10 2400 25 0.10 3500 18 0.15 3000 25 0.15 D4 3500 18 0.15 3000 25 0.15 2800 18 0.10 D3L 2400 25 0.10 D4 3000 25 0.10 4400 6 0.10 D3L 4400 7 0.10 4400 10 0.10 6100 5 0.10 D4 6100 5 0.10 5600 6 0.10 4000 12 0.10 D3L 4400 10 0.10 D4 4400 10 0.10 6100 5 0.10 4600 9 0.10 D3L 4000 12 0.10 3900 9 0.10 D4 4400 10 0.10 D3L 3600 15 0.10 Standard ✽4 LC (µA) 170.0 170.0 250.0 60.0 88.0 88.0 88.0 132.0 132.0 188.0 188.0 188.0 188.0 63.0 63.0 94.5 94.5 94.5 138.6 138.6 207.9 207.9 207.9 296.1 296.1 428.4 428.4 220.0 220.0 330.0 170.0 170.0 170.0 170.0 250.0 250.0 132.0 188.0 272.0 138.6 138.6 138.6 207.9 296.1 150.0 Min. Packaging Q'ty (pcs) ETCE680MCL 2500 ETCE680MFL 2500 ETCE1000MF 2000 4TCE150MI 3000 4TCE220MF 3000 4TCE220MI 3000 4TCE220M 3000 4TCE330MI 3000 4TCE330M 3000 4TCE470MCL 2500 4TCE470MFL 2500 4TCE470MIL 2500 4TCE470ML 2500 6TCE100MI 3000 6TCE100M 3000 6TCE150MF 3000 6TCE150MI 3000 6TCE150M 3000 6TCE220MI 3000 6TCE220M 3000 6TCE330MFL 2500 6TCE330MIL 2500 6TCE330ML 2500 6TCE470MI 2000 6TCE470M 2000 6TCE680MI 2000 6TCE680M 2000 10TCE220MIL 2500 10TCE220ML 2500 10TCE330M 2000 ETCF680M6L 2500 ETCF680M7L 2500 ETCF680ML 2500 ETCF680M5H 2000 ETCF1000M5H 2000 ETCF1000M6H 2000 4TCF330ML 2500 4TCF470ML 2500 4TCF680MAH 2000 6TCF220M5L 2500 6TCF220M9L 2500 6TCF220ML 2500 6TCF330M9L 2500 6TCF470MAH 2000 10TCF150ML 2500 Part number ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Deletion models Conductive Polymer Tantalum Solid Capacitors EOL models CAUTION AND WARNING 1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, office eq uipment, information equipment, communications equipment, and other general purpose electronic devices. Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aeros pace equipment, disaster-prevention equipment, security equipment, vehicles (automobile, train, vessel), please be sure to contact our sales representative. 2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application it might be, be sure to install a protective circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility. 3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on thespecifications with us in advance. 4. Technical information contained in this catalog is intended to convey examples of typical performances and/or applications a nd is not intended to make any warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor grant any license under such rights. 5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of Japan. 6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Ind ustrial Systems Company, Panasonic Corporation. Please contact Factory The information in this catalog is valid as of December 2015.