Download

 IS Series Customization and Part Numbering Definitions IS​
V­​
W
​WW​
­X
​­​
Y
​ZZ V
WWW
Designates the case. We have three options available depending on the bus bar size and current needing to be measured. Mechanical drawings for each case are shown on pages 2, 3 and 4. The current range for each case are listed below. The current is programmable within the range designated for each mechanical package. The maximum positive current is listed in the part number as ​
WWW ​
but does not have to be the same on the negative side. An example is a current range of ­100A to +300A range. This will allow more resolution (mV/A) within the measurable range when compared to the typical +/­300A. ●
●
●
X
There are three output options for the series. ●
●
●
Y
Analog (​
A​
) (0.5 to 4.5V typical); PWM (​
P​
) Digital (​
D​
) (0.5 or 4.5) for on or off. Designates the bandwidth/response time. ●
●
ZZ
Case A ­ Current Range +/­ 38 to +/­ 522 Amps Case B ­ Current Range +/­ 49 to +/­ 678 Amps Case C ­ Current Range +/­ 93 to +/­ 1,283 Amps (6) ​
­ 90kHz bandwidth / 8 uSec response time (8) ​
­ 200kHz bandwidth / 3 uSec response time The special designator for custom programming. The IS series has a number of programmable features listed below. The special designator is assigned by ICE for custom programming requested by a customer. ●
17 Bit ID ­ Is available to create a traceability system. ●
Clamp high and low ­ Clamping can vary between 4.8% to 11.2% of VDD. ●
Output polarity ­ Output polarity can be reversed. ●
Bandwidth filters ­ Bandwidth can be filtered from 90 kHz to 0.2 kHz. ●
Temperature compensation ­ ??? ●
Gain ­ ??? Examples ISA­325­A­001 ­ A current sensor using the A case with an analog output with a measurable current range of +/­325A. ISA­325­A­002 ­ Similar part as above but the customer has requested a bandwidth filter to filter out higher frequency noise. ISC­925­P­001 ­ A current sensor using the C case with a PWM output and current range of +925A and ­100A. www.icecomponents.com
ICE reserves the right to make changes to it’s standard parts without prior notice.
Feb 2015 IS Series Customization and Part Numbering Definitions A Version ­ Current Range +/­ 48 to +/­ 522 Amps www.icecomponents.com
ICE reserves the right to make changes to it’s standard parts without prior notice.
Feb 2015 IS Series Customization and Part Numbering Definitions B Version ­ Current Range +/­ 49 to +/­ 678 Amps www.icecomponents.com
ICE reserves the right to make changes to it’s standard parts without prior notice.
Feb 2015 IS Series Customization and Part Numbering Definitions C Version ­ Current Range +/­ 93 to +/­ 1,283 Amps www.icecomponents.com
ICE reserves the right to make changes to it’s standard parts without prior notice.
Feb 2015