Analog Power BSS138N N-Channel 50-V (D-S) MOSFET These miniature surface mount MOSFETs utilize High Cell Density process. Low rDS(on) assures minimal power loss and conserves energy, making this device ideal for use in power management circuitry. Typical applications are DC-DC converters, power management in portable and battery-powered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. • • PRODUCT SUMMARY VDS (V) rDS(on) (Ω) 3.5 @ VGS = 10V 50 6 @ VGS = 4.5V ID (A) 0.26 0.22 10 @ VGS = 2.75V 0.2 G Low rDS(on) Provides Higher Efficiency and Extends Battery Life Miniature SOT-23 Surface Mount Package Saves Board Space D S o ABSOLUTE MAXIMUM RATINGS (TA = 25 C UNLESS OTHERWISE NOTED) Parameter Symbol Maximum Units Drain-Source Voltage VDS 50 V Gate-Source Voltage ±20 VGS o TA=25 C a Continuous Drain Current o TA=70 C b Pulsed Drain Current a Continuous Source Current (Diode Conduction) 0.26 ID IDM 0.9 IS 0.2 o TA=25 C a Power Dissipation o TA=70 C Operating Junction and Storage Temperature Range THERMAL RESISTANCE RATINGS Parameter a Maximum Junction-to-Ambient t <= 5 sec Steady-State Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature 1 July, 2002 - Rev. A PRELIMINARY A 0.2 A 1.25 PD W 0.8 TJ, Tstg o -55 to 150 Symbol Maximum RTHJA 100 166 C Units o C/W Publication Order Number: DS-BSS138_E Analog Power BSS138N o SPECIFICATIONS (TA = 25 C UNLESS OTHERWISE NOTED) Parameter Symbol Test Conditions Drain-Source Breakdown Voltage Gate-Threshold Voltage Gate-Body Leakage V(BR)DSS VGS(th) IGSS VGS = 0 V, ID = 250 uA VDS = VGS, ID = 250 uA Zero Gate Voltage Drain Current IDSS Limits Unit Min Typ Max Static On-State Drain Current A Drain-Source On-Resistance Forward Tranconductance Diode Forward Voltage Dynamic A A 50 0.8 1.2 1.6 V VDS = 0 V, VGS = 8 V 100 nA VDS = 50 V, VGS = 0 V 1 10 uA VDS = 50 V, VGS = 0 V, T J = 55oC ID(on) VDS = 5 V, VGS = 4.5 V 0.2 A rDS(on) VGS = 2.75 V, ID = 0.2 A VGS = 4.5 V, ID = 0.22 A VGS = 10 V, ID = 0.26 A 1.0 0.7 10 6.0 3.5 g fs VSD VDS = 5 V, ID = 1.5 A IS = 1.6 A, VGS = 0 V 7 0.70 1.20 Qg Qgs Qgd VDS = 10 V, VGS = 4.5 V, ID = 1.7 A 3.5 0.55 0.95 5 5 8 11 3 15 17 22 10 Ω S V b Total Gate Charge Gate-Source Charge Gate-Drain Charge nC Switching Turn-On Delay Time Rise Time Turn-Off Delay Time Fall-Time td(on) tr td(off) tf VDD = 10 V, RL = 6 Ω , RG = 6 Ω, VGEN = 4.5 V ns Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typical” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. 2 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-BSS138_E Analog Power BSS138N Typical Electrical Characteristics 3 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-BSS138_E Analog Power BSS138N Typical Electrical Characteristics Normalized Thermal Transient Impedance, Junction to Ambient 4 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-BSS138_E Analog Power BSS138N Package Information 5 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-BSS138_E