UNISONIC TECHNOLOGIES CO., LTD UT4114 Preliminary Power MOSFET 20A, 20V N-CHANNEL POWER MOSFET DESCRIPTION The UTC UT4114 is an N-channel power MOSFET uses UTC’s advanced trench technology to provide customers perfect RDS(ON) and low gate charge. This device can be applied in Game Machine or in PC. SOP-8 FEATURES * RDS(ON) < 6 mΩ @ VGS=10V, ID=10A RDS(ON) < 7 mΩ @ VGS=4.5V, ID=7A * Typically 315pF low CRSS * Typically 62nC low gate charge * 100 % RG and UIS Tested SYMBOL ORDERING INFORMATION Ordering Number Note: UT4114G-S08-R Pin Assignment: G: Gate Package D: Drain SOP-8 S: Source 1 S 2 S Pin Assignment 3 4 5 6 S G D D 7 D 8 D Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 4 QW-R502-A78.b UT4114 Preliminary Power MOSFET ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Drain-Source Voltage VDSS 20 V Gate-Source Voltage VGSS ±16 V 20 Continuous TC= 25°C A ID (TJ=150°C) TC= 70°C Drain Current t 18.2 Pulsed IDM 50 A Continuous Source - Drain Diode TC= 25°C IS 5.1 A Current Single Pulsed Avalanche Current IAS 30 A L = 0.1mH Single Pulsed Avalanche Energy EAS 45 mJ Power Dissipation TC= 25°C PD 5.7 W Junction Temperature TJ -55 ~ 150 °C Storage Temperature TSTG -55 ~ 150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Based on TC = 25 °C 3. Maximum under steadg state conditions is 85 °C/W. 4. Package limited. THERMAL DATA PARAMETER Junction to Ambient (Note) t ≤10 s Note: Surface Mounted on 1×1 FR4 board. SYMBOL θJA RATINGS 50 UNIT °C/W ELECTRICAL CHARACTERISTICS (TJ=25°C, unless otherwise noted) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage VDS Temperature Coefficient SYMBOL Drain-Source Leakage Current Gate- Source Leakage Current Forward Reverse ON CHARACTERISTICS Gate Threshold Voltage VGS(TH) Temperature Coefficient Static Drain-Source On-State Resistance (Note 1) Forward Transconductance (Note 1) On State Drain Current (Note 1) DYNAMIC PARAMETERS (Note 2) Input Capacitance Output Capacitance Reverse Transfer Capacitance MIN BVDSS ID=250µA, VGS=0V △VDS/TJ ID=250µA VDS=20V, VGS=0V IDSS VDS=20V, VGS=0V, TJ=55°C VGS=+16V, VDS=0V IGSS VGS=-16V, VDS=0V 20 VGS(TH) VDS=VGS, ID=250µA △VGS/TJ ID=250µA VGS=10V, ID=10A RDS(ON) VGS=4.5V, ID=7A gFS VDS=10V, ID=10A ID(ON) VGS=10V, VDS≥5V 1.0 CISS COSS CRSS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS VGS=0V, VDS=10V, f=1.0MHz TYP MAX V mV/°C 19 1 10 +100 -100 2.1 -5.3 4.9 5.6 55 30 3700 745 315 UNIT 6 7 µA nA nA V mV/°C mΩ mΩ S A pF pF pF 2 of 4 QW-R502-A78.b UT4114 Preliminary Power MOSFET ELECTRICAL CHARACTERISTICS (Cont.) PARAMETER SWITCHING PARAMETERS Total Gate Charge SYMBOL QG TEST CONDITIONS www.unisonic.com.tw TYP MAX UNIT 95 42 0.15 62 27.5 8.0 6.0 0.7 30 13 60 30 1.4 55 25 100 55 nC nC nC nC Ω ns ns ns ns 5.1 A 50 A 1.1 V VGS=10V, VDS=10V, ID=10A VGS=4.5V, VDS=10V, Gate to Source Charge QGS ID=10A Gate to Drain Charge QGD Gate Resistance RG f=1.0MHz Turn-ON Delay Time tD(ON) Rise Time tR VDD=10V, RL=2Ω, ID≈5A, VGEN=4.5V, RG=1Ω Turn-OFF Delay Time tD(OFF) Fall-Time tF SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Maximum Body-Diode Continuous Current IS TC=25°C Maximum Body-Diode Pulsed Current ISM (Note 1) Drain-Source Diode Forward Voltage VSD IS=2A Notes: 1. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 % 2. Guaranteed by design, not subject to production testing. UNISONIC TECHNOLOGIES CO., LTD MIN 0.71 3 of 4 QW-R502-A78.b UT4114 Preliminary Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R502-A78.b