SCHTTKY BARRIER RECTIFIER SRB1620C THRU SRB16100C VOLTAGE RANGE 20 to 100 Volts CURRENT 16.0 Amperes FEATURES • • • • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MIL-S-19500/228 Low power loss, high efficiency Low forward voltage, high current capability High surge capacity For use in low voltage, high frequency inverters Free wheeling, and polarlity protection applications MECHANICAL DATA • • • • • Case: TO-263AB( D2 –PAK)Molded Plastic Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: as marked Mounting position: Any Weight: 0.06ounce, 1.9 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRB SRB SYMBOLS SRB Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At Tc=90℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Forward Voltage per at 8.0A per element Maximum DC Reverse Current at rated DC Blocking Voltage per element TC = 25℃ TC = 100℃ Typical Junction Capacitance(Note2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range VRRM VRMS VDC SRB SRB SRB SRB SRB SRB 1620C 1630C 1635C 1640C 1645C 1650C 1660C 1680C 16100C 20 14 20 30 21 30 35 25 35 40 28 40 45 32 45 50 35 50 60 42 60 80 56 80 100 70 100 UNIT Volts Volts Volts I(AV) 16.0 Amps IFSM 150 Amps VF 0.65 IR CJ RθJC TJ TSTG Notes: 1. Thermal Resistance Junction to Ambient 2. Measured at VR=4v and f=1MHz Web Site: www.hkmic.com 0.75 0.5 100 400 3.0 (-55 to +150) 0.85 Volts mA pF ℃/W ℃ SCHTTKY BARRIER RECTIFIER SRB1620C THRU SRB16100C VOLTAGE RANGE 20 to100 Volts CURRENT 16.0 Ampere RATING AND CHRACTERISTIC CURVES SRB1620C THRU SRB16100C FIG.1-TYPICAL FORWARD CURRENT FIG.3-TYPICAL INSTANTANEOUS DERATING CURVE 8.0 4.0 100 50 CASE TEMPERATRUE (℃) 150 20 10 8 6 4 AMPERES 12 0 20,30,40V INSTNTANCEOUS FORWARD CURRENT, AMPERES AVERAGE FORWARD CURRENT, 16 0 FORWARD CHARACTERSTIC 40 20 80,100V 2 50,60V 1.0 0.8 0.6 Tj =25℃ Pulse Width=200μs 0.4 0.2 0.1 0.4 0.5 0.6 0.7 0.8 0.9 1.1 1.0 INSTANTANEOUS FORWART VOLTAGE,VOLTS FIG.4-MAXIMUM NON-REPETITIVE SURGE CURRENT 150 FIG.2-TYPICAL REVERSE CHARACTERISTICS 130 8.3ms Single Half Sine-Wave JEDEC Method 100 10 90 70 50 30 20 TC=75℃ 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz 1.0 FIG.5-TYPICAL JUNCTION CAPACITANCE TC=25℃ 400 0.1 CAPACITANCE,pF INSTANTANEOUS REVERSE CURRENT, MILIAMPERES TC=100℃ CURRENT,AMPERES PEAK FORWARD SURGE 110 350 300 250 TJ =25℃ 200 0.01 0 100 120 200 300 150 REVERSE VOLTAGE VOLTS 1 2 5 10 20 50 100 REVERSE VOLTAGE,VOLTS Web Site: www.hkmic.com 200 500