200D, 202D Datasheet

200D, 202D
www.vishay.com
Vishay
Wet Tantalum Capacitors, Wet Sintered Anode TANTALEX®
Components TANTAPAK® Capacitor Assemblies
FEATURES
• Assembly of silver case capacitors
• 200D, case negative, 5 “A” case codes
• 202D
-Both terminations isolated from case, 12 case codes
-Similar to Tansitor RW & Mallory TL assemblies
-Designed to meet MIL-DTL-3965 and DSCC 04021
requirements
APPLICATIONS
• Military
• Industrial
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +125 °C
Capacitance Tolerance: at 120 Hz, +25 °C
± 20 % standard, ± 10 % available
DC Leakage Current (DCL Max.): at +25 °C
Life Test: capacitors shall withstand 2000 h at a
temperature of +85 °C or +125 °C at the rated DC working
voltage.
Following the life test:
1. DCL shall not exceed the original requirement.
2. ESR shall not be more than 130 % of the initial
requirement.
3. Capacitance shall not change more than ± 25 %.
ORDERING INFORMATION
202D
318
X0
006
A1
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE CODE
200D = negative terminal
connected to case
(Available only in “A” cases)
202D = both terminals
insulated from case
This is expressed in picofarads.
The first two digits are the
significant figures. The third is
the number of zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage rating.
See
Dimensional
Configurations
DIMENSIONS in inches [millimeters]
Series “A” case
1.305 ± 0.031
[33.15 ± 0.79]
Series “B” case
90° ± 1°
1.000 ± 0.062
[25.4 ± 1.57]
CL
0.720 ± 0.031
[18.29 ± 0.79]
CL
0.625 ± 0.015
[15.88 ± 0.38]
90° ± 1°
0.625 ± 0.015
[15.88 ± 0.38]
0.266 ± 0.031
[6.76 ± 0.79]
0.062 x 0.125
[1.57 x 3.18]
HOLE
0.625 ± 0.015
[15.88 ± 0.38]
0.067 [1.70]
DIA. HOLE
CL
H ± 0.031
[0.79]
0.750 ± 0.015
[19.05 ± 0.38]
0.062 x 0.125
[1.57 x 3.18]
Hole
CL
0.203 ± 0.031
[5.16 ± 0.79]
0.281 ± 0.031
[7.14 ± 0.79]
H ± 0.062
[1.57]
CL
1.275 ± 0.015
[32.39 ± 0.38]
Model 200D
Revision: 30-Jul-14
1.593 ± 0.062
[40.46 ± 1.57]
Model 202D
Document Number: 40027
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
DIMENSIONS in inches [millimeters]
CASE CODE
H
CASE HEIGHT
TYPICAL WEIGHT
(g)
A1
A2
A3
A4
A5
B1
B2
B3
B4
B5
B6
B7
1.062 [26.97]
1.375 [34.93]
1.625 [41.28]
2.000 [50.80]
2.500 [63.50]
1.500 [38.10]
1.875 [47.63]
2.250 [57.15]
2.625 [66.68]
3.000 [76.20]
3.375 [85.73]
3.750 [95.25]
45
60
80
100
125
170
210
250
290
335
380
420
STANDARD RATINGS TYPE 200D
CAPACITANCE
(μF)
CASE CODE
960
1200
1400
1600
2100
2100
2400
2700
3200
4300
A1
A2
A3
A1
A2
A4
A5
A3
A4
A5
1300
1700
2200
2700
3500
A1
A2
A3
A4
A5
1100
1400
1800
2200
2900
A1
A2
A3
A4
A5
520
660
820
900
1200
1200
1300
1500
1800
2400
A1
A2
A3
A1
A2
A4
A5
A3
A4
A5
PART NUMBER (1)
MAX. ESR
AT +25 °C
()
15 VDC AT +85 °C; 10 VDC AT +125 °C
200D967X0015A1
0.25
200D128X0015A2
0.21
200D148X0015A3
0.18
200D168X0015A1
0.25
200D218X0015A2
0.19
200D218X0015A4
0.12
200D248X0015A5
0.10
200D278X0015A3
0.15
200D328X0015A4
0.13
200D438X0015A5
0.095
20 VDC AT +85 °C; 13 VDC AT +125 °C
200D138X0020A1
0.25
200D178X0020A2
0.19
200D228X0020A3
0.15
200D278X0020A4
0.13
200D358X0020A5
0.094
25 VDC AT +85 °C; 15 VDC AT +125 °C
200D118X0025A1
0.30
200D148X0025A2
0.23
200D188X0025A3
0.18
200D228X0025A4
0.15
200D298X0025A5
0.11
30 VDC AT +85 °C; 20 VDC AT +125 °C
200D527X0030A1
0.48
200D667X0030A2
0.38
200D827X0030A3
0.31
200D907X0030A1
0.37
200D128X0030A2
0.27
200D128X0030A4
0.21
200D138X0030A5
0.19
200D158X0030A3
0.22
200D188X0030A4
0.18
200D248X0030A5
0.14
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
3.1
2.3
1.7
4.2
3.1
1.3
1.15
2.5
2.1
1.6
1.17
1.45
1.67
1.20
1.52
2.22
2.66
1.83
2.13
2.73
5.0
3.8
3.0
2.5
1.9
1.20
1.52
1.83
2.13
2.75
5.3
4.0
3.2
2.7
2.0
1.10
1.38
1.67
1.98
2.54
5.3
4.2
2.9
5.8
4.4
2.3
2.1
3.5
2.9
2.2
0.87
1.08
1.27
0.99
1.28
1.68
1.93
1.50
1.81
2.25
Note
The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”.
For requirements or ratings other than those listed, please contact a Vishay representative.
(1)
Revision: 30-Jul-14
Document Number: 40027
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
STANDARD RATINGS TYPE 200D
CAPACITANCE
(μF)
CASE CODE
PART NUMBER (1)
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
6.3
4.7
3.8
3.2
2.4
0.99
1.28
1.51
1.81
2.25
6.7
5.0
4.0
3.3
2.5
1.04
1.33
1.58
1.86
2.34
7.2
6.4
7.2
5.6
4.1
5.4
3.1
4.3
3.6
2.8
2.7
0.85
0.79
1.04
1.05
1.23
1.33
1.54
1.58
1.86
2.84
2.34
7.5
5.6
4.5
3.7
2.8
1.04
1.33
1.58
1.86
2.34
8.5
7.0
7.5
5.0
5.6
4.5
3.65
3.5
3.7
2.8
0.80
0.98
1.18
1.15
1.48
1.77
1.54
1.76
2.13
2.72
9.2
6.9
5.5
4.6
3.4
1.04
1.33
1.58
1.86
2.34
35 VDC AT +85 °C; 22 VDC AT +125 °C
720
960
1200
1400
1900
A1
A2
A3
A4
A5
200D727X0035A1
200D967X0035A2
200D128X0035A3
200D148X0035A4
200D198X0035A5
0.37
0.27
0.22
0.18
0.14
40 VDC AT +85 °C; 25 VDC AT +125 °C
600
800
1000
1200
1600
A1
A2
A3
A4
A5
200D607X0040A1
200D807X0040A2
200D108X0040A3
200D128X0040A4
200D168X0040A5
0.33
0.25
0.20
0.17
0.13
50 VDC AT +85 °C; 35 VDC AT +125 °C
400
430
490
500
600
660
800
820
980
1000
1300
A1
A1
A1
A2
A3
A2
A4
A3
A4
A5
A5
410
550
680
820
1100
A1
A2
A3
A4
A5
270
330
400
400
530
660
600
660
790
1100
A1
A2
A1
A3
A2
A3
A4
A5
A4
A5
280
370
470
570
750
A1
A2
A3
A4
A5
200D407X0050A1
200D437X0050A1
200D497X0050A1
200D507X0050A2
200D607X0050A3
200D667X0050A2
200D807X0050A4
200D827X0050A3
200D987X0050A4
200D108X0050A5
200D138X0050A5
0.50
0.58
0.33
0.40
0.33
0.25
0.25
0.20
0.17
0.25
0.13
60 VDC AT +85 °C; 40 VDC AT +125 °C
200D417X0060A1
200D557X0060A2
200D687X0060A3
200D827X0060A4
200D118X0060A5
0.33
0.25
0.20
0.17
0.13
75 VDC AT +85 °C; 50 VDC AT +125 °C
200D277X0075A1
200D337X0075A2
200D407X0075A1
200D407X0075A3
200D537X0075A2
200D667X0075A3
200D607X0075A4
200D667X0075A5
200D797X0075A4
200D118X0075A5
0.56
0.46
0.26
0.38
0.20
0.16
0.25
0.23
0.13
0.096
85 VDC AT +85 °C; 60 VDC AT +125 °C
200D287X0085A1
200D377X0085A2
200D477X0085A3
200D577X0085A4
200D757X0085A5
0.33
0.25
0.20
0.17
0.13
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”.
For requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
STANDARD RATINGS TYPE 200D
CAPACITANCE
(μF)
CASE CODE
PART NUMBER (1)
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
15.0
11.6
8.3
8.0
6.2
6.5
5.0
5.8
4.2
3.1
0.62
0.78
0.95
0.91
1.21
1.15
1.44
1.40
1.72
2.18
15.0
12.0
9.0
7.5
0.95
1.21
1.44
1.72
28.8
22.4
16.4
12.4
11.2
0.40
0.50
0.56
0.72
0.90
100 VDC AT +85 °C; 70 VDC AT +125 °C
170
220
260
260
350
350
440
440
530
700
A1
A2
A1
A3
A2
A4
A3
A5
A4
A5
170
220
280
340
A1
A2
A3
A4
70
90
100
140
180
A1
A2
A3
A4
A5
200D177X0100A1
200D227X0100A2
200D267X0100A1
200D267X0100A3
200D357X0100A2
200D357X0100A4
200D447X0100A3
200D447X0100A5
200D537X0100A4
200D707X0100A5
0.94
0.72
0.40
0.61
0.30
0.45
0.24
0.36
0.20
0.15
125 VDC AT +85 °C; 80 VDC AT +125 °C
200D177X0125A1
200D227X0125A2
200D287X0125A3
200D347X0125A4
0.40
0.30
0.24
0.20
150 VDC AT +85 °C; 100 VDC AT +125 °C
200D706X0150A1
200D906X0150A2
200D107X0150A3
200D147X0150A4
200D187X0150A5
2.27
1.77
1.59
1.14
0.88
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”.
For requirements or ratings other than those listed, please contact a Vishay representative.
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF)
CASE CODE
960
1200
1400
1600
2100
2100
2400
2700
3200
3300
4300
4500
5600
6700
7800
9000
10 000
A1
A2
A3
A1
A2
A4
A5
A3
A4
B1
A5
B2
B3
B4
B5
B6
B7
PART NUMBER (1)
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
3.1
2.3
1.7
4.2
3.1
1.3
1.15
2.5
2.1
3.2
1.6
2.4
1.9
1.6
1.4
1.2
1.1
1.17
1.45
1.67
1.20
1.52
2.22
2.66
1.83
2.13
2.17
2.73
2.65
3.24
3.80
4.28
4.84
5.38
15 VDC AT +85 °C; 10 VDC AT +125 °C
202D967X0015A1
202D128X0015A2
202D148X0015A3
202D168X0015A1
202D218X0015A2
202D218X0015A4
202D248X0015A5
202D278X0015A3
202D328X0015A4
202D338X0015B1
202D438X0015A5
202D458X0015B2
202D568X0015B3
202D678X0015B4
202D788X0015B5
202D908X0015B6
202D109X0015B7
0.25
0.21
0.18
0.25
0.19
0.12
0.10
0.15
0.13
0.14
0.095
0.11
0.085
0.070
0.061
0.053
0.047
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”.
For requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF)
CASE CODE
PART NUMBER (1)
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
20 VDC AT +85 °C; 13 VDC AT +125 °C
1300
A1
202D138X0020A1
0.25
5.0
1.20
1700
A2
202D178X0020A2
0.19
3.8
1.52
2200
A3
202D228X0020A3
0.15
3.0
1.83
2700
A4
202D278X0020A4
0.13
2.5
2.13
2800
B1
202D288X0020B1
0.14
3.3
2.17
3500
A5
202D358X0020A5
0.094
1.9
2.75
3800
B2
202D388X0020B2
0.11
2.5
2.65
4700
B3
202D478X0020B3
0.085
2.0
3.24
5600
B4
202D568X0020B4
0.071
1.7
3.77
6600
B5
202D668X0020B5
0.061
1.4
4.28
7500
B6
202D758X0020B6
0.053
1.3
4.84
8500
B7
202D858X0020B7
0.047
1.1
5.38
25 VDC AT +85 °C; 15 VDC AT +125 °C
1100
A1
202D118X0025A1
0.30
5.3
1.10
1400
A2
202D148X0025A2
0.23
4.0
1.38
1800
A3
202D188X0025A3
0.18
3.2
1.67
2200
A4
202D228X0025A4
0.15
2.7
1.98
2300
B1
202D238X0025B1
0.14
3.5
2.17
2.54
2900
A5
202D298X0025A5
0.11
2.0
3100
B2
202D318X0025B2
0.11
2.6
2.65
3900
B3
202D398X0025B3
0.085
2.1
3.24
4700
B4
202D478X0025B4
0.071
1.8
3.77
5500
B5
202D558X0025B5
0.061
1.5
4.28
6200
B6
202D628X0025B6
0.053
1.3
4.84
7000
B7
202D708X0025B7
0.047
1.2
5.38
30 VDC AT +85 °C; 20 VDC AT +125 °C
520
A1
202D527X0030A1
0.48
5.3
0.87
660
A2
202D667X0030A2
0.38
4.2
1.08
820
A3
202D827X0030A3
0.31
2.9
1.27
900
A1
202D907X0030A1
0.37
5.8
0.99
1200
A2
202D128X0030A2
0.27
4.4
1.28
1200
A4
202D128X0030A4
0.21
2.3
1.68
1300
A5
202D138X0030A5
0.19
2.1
1.93
1500
A3
202D158X0030A3
0.22
3.5
1.50
1800
A4
202D188X0030A4
0.18
2.9
1.81
2000
B1
202D208X0030B1
0.17
1.7
1.97
2400
A5
202D248X0030A5
0.14
2.2
2.25
2600
B2
202D268X0030B2
0.13
2.8
2.43
3300
B3
202D338X0030B3
0.10
2.2
2.98
4000
B4
202D408X0030B4
0.085
1.8
3.45
4600
B5
202D468X0030B5
0.073
1.6
3.92
5300
B6
202D538X0030B6
0.064
1.4
4.40
6000
B7
202D608X0030B7
0.057
1.2
4.88
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”.
For requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF)
CASE CODE
720
A1
202D727X0035A1
PART NUMBER (1)
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
0.37
6.3
0.99
35 VDC AT +85 °C; 22 VDC AT +125 °C
960
A2
202D967X0035A2
0.27
4.7
1.28
1200
A3
202D128X0035A3
0.22
3.8
1.51
1400
A4
202D148X0035A4
0.18
3.2
1.81
1600
B1
202D168X0035B1
0.20
3.8
1.82
1900
A5
202D198X0035A5
0.14
2.4
2.25
2200
B2
202D228X0035B2
0.15
2.9
2.27
2700
B3
202D278X0035B3
0.12
2.3
2.72
3200
B4
202D328X0035B4
0.10
1.9
3.18
3800
B5
202D388X0035B5
0.085
1.6
3.63
4300
B6
202D438X0035B6
0.075
1.4
4.07
4900
B7
202D498X0035B7
0.067
1.3
4.51
40 VDC AT +85 °C; 25 VDC AT +125 °C
600
A1
202D607X0040A1
0.33
6.7
1.04
800
A2
202D807X0040A2
0.25
5.0
1.33
1000
A3
202D108X0040A3
0.20
4.0
1.58
1200
A4
202D128X0040A4
0.17
3.3
1.86
1300
B1
202D138X0040B1
0.20
4.0
1.82
1600
A5
202D168X0040A5
0.13
2.5
2.34
1800
B2
202D188X0040B2
0.15
3.0
2.27
2200
B3
202D228X0040B3
0.12
2.4
2.72
2600
B4
202D268X0040B4
0.10
2.0
3.18
3100
B5
202D318X0040B5
0.086
1.7
3.61
3500
B6
202D358X0040B6
0.075
1.5
4.07
4000
B7
202D408X0040B7
0.057
1.3
4.51
50 VDC AT +85 °C; 35 VDC AT +125 °C
400
A1
202D407X0050A1
0.50
7.2
0.85
430
A1
202D437X0050A1
0.58
6.4
0.79
490
A1
202D497X0050A1
0.33
7.2
1.04
500
A2
202D507X0050A2
0.40
5.6
1.05
600
A3
202D607X0050A3
0.33
4.1
1.23
660
A2
202D667X0050A2
0.25
5.4
1.33
800
A4
202D807X0050A4
0.25
3.1
1.54
820
A3
202D827X0050A3
0.20
4.3
1.58
980
A4
202D987X0050A4
0.17
3.6
1.86
1000
A5
202D108X0050A5
0.25
2.8
2.84
1100
B1
202D118X0050B1
0.20
4.2
1.82
1300
A5
202D138X0050A5
0.13
2.7
2.34
1400
B2
202D148X0050B2
0.15
3.1
2.27
1800
B3
202D188X0050B3
0.12
2.5
2.72
2200
B4
202D228X0050B4
0.10
2.0
3.18
2500
B5
202D258X0050B5
0.086
1.8
3.61
2900
B6
202D298X0050B6
0.075
1.6
4.07
3200
B7
202D328X0050B7
0.067
1.4
4.51
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”.
For requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF)
CASE CODE
PART NUMBER (1)
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
60 VDC AT +85 °C; 40 VDC AT +125 °C
410
A1
202D417X0060A1
0.33
7.5
1.04
550
A2
202D557X0060A2
0.25
5.6
1.33
680
A3
202D687X0060A3
0.20
4.5
1.58
820
A4
202D827X0060A4
0.17
3.7
1.86
900
B1
202D907X0060B1
0.22
4.3
1.73
1100
A5
202D118X0060A5
0.13
2.8
2.34
1200
B2
202D128X0060B2
0.16
3.3
2.19
1500
B3
202D158X0060B3
0.13
2.6
2.62
1800
B4
202D188X0060B4
0.11
2.2
3.03
2100
B5
202D218X0060B5
0.093
1.9
3.47
2400
B6
202D248X0060B6
0.081
1.6
3.9
2700
B7
202D278X0060B7
0.072
1.4
4.35
270
A1
202D277X0075A1
0.56
8.5
0.80
330
A2
202D337X0075A2
0.46
7.0
0.98
400
A1
202D407X0075A1
0.26
7.5
1.18
400
A3
202D407X0075A3
0.38
5.0
1.15
530
A2
202D537X0075A2
0.20
5.6
1.48
660
A3
202D667X0075A3
0.16
4.5
1.77
600
A4
202D607X0075A4
0.25
3.65
1.54
660
A5
202D667X0075A5
0.23
3.5
1.76
75 VDC AT +85 °C; 50 VDC AT +125 °C
790
A4
202D797X0075A4
0.13
3.7
2.13
720
B1
202D727X0075B1
0.28
4.5
1.54
110
A5
202D118X0075A5
0.096
2.8
2.72
960
B2
202D967X0075B2
0.21
3.4
1.91
1200
B3
202D128X0075B3
0.17
2.7
2.29
1400
B4
202D148X0075B4
0.14
2.1
2.69
1700
B5
202D178X0075B5
0.12
1.9
3.06
1900
B6
202D198X0075B6
0.11
1.7
3.36
2200
B7
202D228X0075B7
0.095
1.5
3.78
280
A1
202D287X0085A1
0.33
9.2
1.04
370
A2
202D377X0085A2
0.25
6.9
1.33
470
A3
202D477X0085A3
0.20
5.5
1.58
570
A4
202D577X0085A4
0.17
4.6
1.86
600
B1
202D607X0085B1
0.28
4.7
1.54
750
A5
202D757X0085A5
0.13
3.4
2.34
800
B2
202D807X0085B2
0.21
3.5
1.91
1000
B3
202D108X0085B3
0.17
2.8
2.29
1200
B4
202D128X0085B4
0.14
2.4
2.69
1400
B5
202D148X0085B5
0.12
2.0
3.06
1600
B6
202D168X0085B6
0.11
1.8
3.36
1800
B7
202D188X0085B7
0.095
1.6
3.78
85 VDC AT +85 °C; 60 VDC AT +125 °C
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”.
For requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF)
CASE CODE
PART NUMBER (1)
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
0.62
100 VDC AT +85 °C; 70 VDC AT +125 °C
170
A1
202D177X0100A1
0.94
15.0
220
A2
202D227X0100A2
0.72
11.6
0.78
260
A1
202D267X0100A1
0.40
8.3
0.95
260
A3
202D267X0100A3
0.61
8.0
0.91
350
A2
202D357X0100A2
0.30
6.2
1.21
350
A4
202D357X0100A4
0.45
6.5
1.15
440
A3
202D447X0100A3
0.24
5.0
1.44
440
A5
202D447X0100A5
0.36
5.8
1.40
510
B1
202D517X0100B1
0.28
4.8
1.54
530
A4
202D537X0100A4
0.20
4.2
1.72
680
B2
202D687X0100B2
0.21
3.6
1.91
700
A5
202D707X0100A5
0.15
3.1
2.18
850
B3
202D857X0100B3
0.17
2.9
2.29
1000
B4
202D108X0100B4
0.14
2.4
2.69
1200
B5
202D128X0100B5
0.12
2.1
3.06
1400
B6
202D148X0100B6
0.11
1.8
3.36
1500
B7
202D158X0100B7
0.095
1.6
3.78
0.95
125 VDC AT +85 °C; 80 VDC AT +125 °C
170
A1
202D177X0125A1
0.40
15.0
220
A2
202D227X0125A2
0.30
12.0
1.21
280
A3
202D287X0125A3
0.24
9.0
1.44
340
A4
202D347X0125A4
0.20
7.5
1.72
340
B1
202D347X0125B1
0.28
5.4
1.54
560
B3
202D567X0125B3
0.17
3.2
2.29
670
B4
202D677X0125B4
0.14
2.7
2.69
790
B5
202D797X0125B5
0.12
2.4
3.06
900
B6
202D907X0125B6
0.11
2.0
3.38
1000
B7
202D108X0125B7
0.095
1.8
3.78
70
A1
202D706X0150A1
2.27
28.8
0.40
90
A2
202D906X0150A2
1.77
22.4
0.50
100
A3
202D107X0150A3
1.59
16.4
0.56
140
A4
202D147X0150A4
1.14
12.4
0.72
180
A5
202D187X0150A5
0.88
11.2
0.90
150 VDC AT +85 °C; 100 VDC AT +125 °C
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”.
For requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
EXTENDED RATINGS TYPE 200D
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
0.28
2.3
1.13
200D828X0006A2
0.22
1.8
1.41
200D998X0006A3
0.18
1.5
1.67
200D139X0006A4
0.14
1.1
2.05
CAPACITANCE
(μF)
CASE CODE
6600
A1
200D668X0006A1
8200
A2
9900
A3
13 000
A4
PART NUMBER
MAX. ESR
AT +25 °C
()
6 VDC AT +85 °C; 4 VDC AT +125 °C
8 VDC AT +85 °C; 5 VDC AT +125 °C
5400
A1
200D548X0008A1
0.28
2.8
1.13
6800
A2
200D688X0008A2
0.22
2.2
1.41
8200
A3
200D828X0008A3
0.18
1.8
1.67
11000
A4
200D119X0008A4
0.14
1.4
2.05
14 000
A5
200D149X0008A5
0.11
1.1
2.35
4500
A1
200D458X0010A1
0.28
3.4
1.13
5600
A2
200D568X0010A2
0.22
2.7
1.41
6800
A3
200D688X0010A3
0.18
2.2
1.67
9000
A4
200D908X0010A4
0.14
1.7
2.05
11 000
A5
200D119X0010A5
0.11
1.4
2.35
10 VDC AT +85 °C; 7 VDC AT +125 °C
15 VDC AT +85 °C; 10 VDC AT +125 °C
3100
A1
200D318X0015A1
0.28
3.9
1.13
3900
A2
200D398X0015A2
0.22
3.1
1.41
4700
A3
200D478X0015A3
0.18
2.6
1.67
6200
A4
200D628X0015A4
0.14
1.9
2.05
7800
A5
200D788X0015A5
0.11
1.6
2.54
2600
A1
200D268X0020A1
0.28
3.9
1.13
3300
A2
200D338X0020A2
0.22
3.1
1.41
4000
A3
200D408X0020A3
0.18
2.6
1.67
5300
A4
200D538X0020A4
0.14
1.9
2.05
6600
A5
200D668X0020A5
0.11
1.6
2.54
20 VDC AT +85 °C; 13 VDC AT +125 °C
25 VDC AT +85 °C; 15 VDC AT +125 °C
2200
A1
200D228X0025A1
0.28
4.1
1.13
2700
A2
200D278X0025A2
0.22
3.3
1.41
3200
A3
200D328X0025A3
0.18
2.8
1.67
4300
A4
200D438X0025A4
0.14
2.1
2.05
5400
A5
200D548X0025A5
0.11
1.7
2.54
1800
A1
200D188X0030A1
0.28
4.5
1.13
2200
A2
200D228X0030A2
0.22
3.6
1.41
2600
A3
200D268X0030A3
0.18
3.0
1.67
3500
A4
200D358X0030A4
0.14
2.3
2.05
4400
A5
200D448X0030A5
0.11
1.8
2.54
30 VDC AT +85 °C; 20 VDC AT +125 °C
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
EXTENDED RATINGS TYPE 200D
CAPACITANCE
(μF)
CASE CODE
PART NUMBER
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
35 VDC AT +85 °C; 22 VDC AT +125 °C
1400
A1
200D148X0035A1
0.28
5.1
1.13
1800
A2
200D188X0035A2
0.22
4.1
1.41
2200
A3
200D228X0035A3
0.18
3.4
1.67
2900
A4
200D298X0035A4
0.14
2.6
2.05
3600
A5
200D368X0035A5
0.11
2.1
2.54
1200
A1
200D128X0040A1
0.28
5.5
1.13
1500
A2
200D158X0040A2
0.22
4.4
1.41
1800
A3
200D188X0040A3
0.18
3.7
1.67
2400
A4
200D248X0040A4
0.14
2.8
2.05
3000
A5
200D308X0040A5
0.11
2.3
2.54
40 VDC AT +85 °C; 25 VDC AT +125 °C
50 VDC AT +85 °C; 35 VDC AT +125 °C
960
A1
200D967X0050A1
0.28
6.1
1.13
1200
A2
200D128X0050A2
0.22
4.9
1.14
1400
A3
200D148X0050A3
0.18
4.1
1.67
1900
A4
200D198X0050A4
0.14
3.1
2.05
2400
A5
200D248X0050A5
0.11
2.5
2.54
60 VDC AT +85 °C; 40 VDC AT +125 °C
800
A1
200D807X0060A1
0.28
6.8
1.13
1000
A2
200D108X0060A2
0.22
5.4
1.41
1200
A3
200D128X0060A3
0.18
4.5
1.67
1600
A4
200D168X0060A4
0.14
3.4
2.05
2000
A5
200D208X0060A5
0.11
2.7
2.54
75 VDC AT +85 °C; 50 VDC AT +125 °C
650
A1
200D657X0075A1
0.28
7.9
1.13
820
A2
200D827X0075A2
0.22
6.3
1.41
980
A3
200D987X0075A3
0.18
5.2
1.64
1300
A4
200D138X0075A4
0.14
3.9
2.05
1600
A5
200D168X0075A5
0.11
3.2
2.54
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
EXTENDED RATINGS TYPE 202D
CAPACITANCE
(μF)
CASE CODE
6600
8200
9900
12 000
13 000
15 000
A1
A2
A3
B1
A4
A5
5400
6800
8200
9600
11000
12 000
14 000
A1
A2
A3
B1
A4
B2
A5
4500
5600
6800
9000
9600
11 000
A1
A2
A3
A4
B1
A5
3100
3900
4700
6200
6560
7800
A1
A2
A3
A4
B1
A5
2600
3300
4000
5300
6600
A1
A2
A3
A4
A5
2200
2700
3200
4300
5400
A1
A2
A3
A4
A5
1800
2200
2600
3500
4400
A1
A2
A3
A4
A5
PART NUMBER
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
0.28
0.22
0.18
0.11
0.14
0.12
2.3
1.8
1.5
0.90
1.1
1.8
1.13
1.41
1.67
2.54
2.05
2.35
0.28
0.22
0.18
0.12
0.14
0.086
0.11
2.8
2.2
1.8
1.8
1.4
1.3
1.1
1.13
1.41
1.67
2.54
2.05
2.99
2.35
3.4
2.7
2.2
1.7
1.8
1.4
1.13
1.41
1.67
2.05
2.54
2.35
3.9
3.1
2.6
1.9
2.2
1.6
1.13
1.41
1.67
2.05
2.03
2.54
3.9
3.1
2.6
1.9
1.6
1.13
1.41
1.67
2.05
2.54
4.1
3.3
2.8
2.1
1.7
1.13
1.41
1.67
2.05
2.54
4.5
3.6
3.0
2.3
1.8
1.13
1.41
1.67
2.05
2.54
6 VDC AT +85 °C; 4 VDC AT +125 °C
202D668X0006A1
202D828X0006A2
202D998X0006A3
202D129X0006B1
202D139X0006A4
202D159X0006A5
8 VDC AT +85 °C; 5 VDC AT +125 °C
202D548X0008A1
202D688X0008A2
202D828X0008A3
202D968X0008B1
202D119X0008A4
202D129X0008B2
202D149X0008A5
10 VDC AT +85 °C; 7 VDC AT +125 °C
202D458X0010A1
202D568X0010A2
202D688X0010A3
202D908X0010A4
202D968X0010B1
202D119X0010A5
0.28
0.22
0.18
0.14
0.12
0.11
15 VDC AT +85 °C; 10 VDC AT +125 °C
202D318X0015A1
202D398X0015A2
202D478X0015A3
202D628X0015A4
202D668X0015B1
202D788X0015A5
0.28
0.22
0.18
0.14
0.16
0.11
20 VDC AT +85 °C; 13 VDC AT +125 °C
202D268X0020A1
202D338X0020A2
202D408X0020A3
202D538X0020A4
202D668X0020A5
0.28
0.22
0.18
0.14
0.11
25 VDC AT +85 °C; 15 VDC AT +125 °C
202D228X0025A1
202D278X0025A2
202D328X0025A3
202D438X0025A4
202D548X0025A5
0.28
0.22
0.18
0.14
0.11
30 VDC AT +85 °C; 20 VDC AT +125 °C
202D188X0030A1
202D228X0030A2
202D268X0030A3
202D358X0030A4
202D448X0030A5
0.28
0.22
0.18
0.14
0.11
Note
The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
(1)
Revision: 30-Jul-14
Document Number: 40027
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
EXTENDED RATINGS TYPE 202D
CAPACITANCE
(μF)
CASE CODE
PART NUMBER
MAX. ESR
AT +25 °C
()
MAX. IMP.
AT -55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
35 VDC AT +85 °C; 22 VDC AT +125 °C
1400
A1
202D148X0035A1
0.28
5.1
1.13
1800
A2
202D188X0035A2
0.22
4.1
1.41
2200
A3
202D228X0035A3
0.18
3.4
1.67
2900
A4
202D298X0035A4
0.14
2.6
2.05
3600
A5
202D368X0035A5
0.11
2.1
2.54
3900
B1
202D398X0035B1
0.16
2.7
2.03
5500
B2
202D558X0035B2
0.11
1.9
2.64
7000
B3
202D708X0035B3
0.089
1.5
3.16
8600
B4
202D868X0035B4
0.073
1.2
3.72
10 000
B5
202D109X0035B5
0.062
1.0
4.25
12 000
B6
202D129X0035B6
0.053
0.90
4.84
13 000
B7
202D139X0035B7
0.047
0.79
5.38
40 VDC AT +85 °C; 25 VDC AT +125 °C
1200
A1
202D128X0040A1
0.28
5.5
1.13
1500
A2
202D158X0040A2
0.22
4.4
1.41
1800
A3
202D188X0040A3
0.18
3.7
1.67
2400
A4
202D248X0040A4
0.14
2.8
2.05
3000
A5
202D308X0040A5
0.11
2.3
2.54
50 VDC AT +85 °C; 35 VDC AT +125 °C
960
A1
202D967X0050A1
0.28
6.1
1.13
1200
A2
202D128X0050A2
0.22
4.9
1.14
1400
A3
202D148X0050A3
0.18
4.1
1.67
1900
A4
202D198X0050A4
0.14
3.1
2.05
2400
A5
202D248X0050A5
0.11
2.5
2.54
800
A1
202D807X0060A1
0.28
6.8
1.13
1000
A2
202D108X0060A2
0.22
5.4
1.41
1200
A3
202D128X0060A3
0.18
4.5
1.67
1600
A4
202D168X0060A4
0.14
3.4
2.05
2000
A5
202D208X0060A5
0.11
2.7
2.54
60 VDC AT +85 °C; 40 VDC AT +125 °C
75 VDC AT +85 °C; 50 VDC AT +125 °C
650
A1
202D657X0075A1
0.28
7.9
1.13
820
A2
202D827X0075A2
0.22
6.3
1.41
980
A3
202D987X0075A3
0.18
5.2
1.64
1300
A4
202D138X0075A4
0.14
3.9
2.05
1600
A5
202D168X0075A5
0.11
3.2
2.54
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
Revision: 30-Jul-14
Document Number: 40027
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
04021 RATINGS AND CASE CODES
DSCC
DRAWING 04021
CAPACITANCE
(μF)
15 VDC AT 85 °C RATED
25 °C
17.2 VDC AT 85 °C SURGE
04021-01
960
A1
04021-02
1200
04021-03
1400
04021-04
2100
04021-05
2400
30 VDC AT 85 °C RATED
MAX. DCL
(μA)
CASE CODE
85 °C AND 125 °C
MAX. IMPEDANCE
()
10 VDC AT 125 °C DERATED
7
58
3.10
A2
9
72
2.30
A3
11
84
1.70
A4
16
126
1.30
A5
18
144
1.15
34.5 VDC AT 85 °C SURGE
20 VDC AT 125 °C DERATED
04021-06
520
A1
8
63
5.30
04021-07
660
A2
10
80
4.20
04021-08
820
A3
13
99
2.90
04021-09
1200
A4
18
144
2.30
04021-10
1300
A5
20
156
2.10
50 VDC AT 85 °C RATED
57.5 VDC AT 85 °C SURGE
30 VDC AT 125 °C DERATED
04021-11
400
A1
10
80
7.20
04021-12
430
A1
10
78
6.40
04021-13
500
A2
13
100
5.60
04021-14
600
A3
15
120
4.10
04021-15
800
A4
20
160
3.10
04021-16
1000
A5
23
180
2.80
75 VDC AT 85 °C RATED
86.2 VDC AT 85 °C SURGE
50 VDC AT 125 °C DERATED
04021-17
270
A1
9
81
8.50
04021-18
330
A2
12
99
7.00
04021-19
400
A3
15
119
5.00
04021-20
600
A4
20
180
3.65
04021-21
660
A5
23
198
3.50
100 VDC AT 85 °C RATED
115.0 VDC AT 85 °C SURGE
65 VDC AT 125 °C DERATED
04021-22
170
A1
9
68
15.00
04021-23
220
A2
11
88
11.60
04021-24
260
A3
13
104
8.00
04021-25
350
A4
18
140
6.50
04021-26
440
A5
22
176
5.80
150 VDC AT 85 °C RATED
172.0 VDC AT 85 °C SURGE
100 VDC AT 125 °C DERATED
04021-27
70
A1
6
42
28.80
04021-28
90
A2
7
54
22.40
04021-29
100
A3
9
60
16.40
04021-30
140
A4
11
84
12.40
04021-31
180
A5
14
104
11.20
ORDERING INFORMATION - DSCC PART NUMBER
04021
-29
DSCC
DRAWING
NUMBER
DASH
NUMBER
DEFENSE SUPPLY CENTER,
COLUMBUS COLUMBUS, OHIO
DRAWING NO.
04021
Revision: 30-Jul-14
Document Number: 40027
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
200D, 202D
www.vishay.com
Vishay
MILITARY SPECIFICATION TANTAPAK® CAPACITOR ASSEMBLIES - CROSS REFERENCE
CAPACITANCE
(μF)
RATED
VOLTAGE
AT +85 °C
CASE
CODE
VISHAY
PART NUMBER
(DISCONTINUED)
CL55 TYPE (1)
DESIGNATION
(NEW)
DSCC DRAWING (1)
04021
960.0
15
A1
202D967X0015A1
CL55BE961MPG
04021-01
1200.0
15
A2
202D128X0015A2
CL55BE122MPG
04021-02
1400.0
15
A3
202D148X0015A3
CL55BE142MPG
04021-03
2100.0
15
A4
202D218X0015A4
CL55BE212MPG
04021-04
2400.0
15
A5
202D248X0015A5
CL55BE242MPG
04021-05
520.0
30
A1
202D527X0030A1
CL55BH521MPG
04021-06
660.0
30
A2
202D667X0030A2
CL55BH661MPG
04021-07
820.0
30
A3
202D827X0030A3
CL55BH821MPG
04021-08
1200.0
30
A4
202D128X0030A4
CL55BH122MPG
04021-09
1300.0
30
A5
202D138X0030A5
CL55BH132MPG
04021-10
400.0
50
A1
202D407X0050A1
CL55BJ401MPG
04021-11
430.0
50
A1
202D437X0050A1
CL55BJ431MPG
04021-12
500.0
50
A2
202D507X0050A2
CL55BJ501MPG
04021-13
600.0
50
A3
202D607X0050A3
CL55BJ601MPG
04021-14
800.0
50
A4
202D807X0050A4
CL55BJ801MPG
04021-15
1000.0
50
A5
202D108X0050A5
CL55BJ102MPG
04021-16
270.0
75
A1
202D277X0075A1
CL55BL271MPG
04021-17
330.0
75
A2
202D337X0075A2
CL55BL331MPG
04021-18
400.0
75
A3
202D407X0075A3
CL55BL401MPG
04021-19
600.0
75
A4
202D607X0075A4
CL55BL601MPG
04021-20
660.0
75
A5
202D667X0075A5
CL55BL661MPG
04021-21
170.0
100
A1
202D177X0100A1
CL55BN171MPG
04021-22
220.0
100
A2
202D227X0100A2
CL55BN221MPG
04021-23
260.0
100
A3
202D267X0100A3
CL55BN261MPG
04021-24
350.0
100
A4
202D357X0100A4
CL55BN351MPG
04021-25
440.0
100
A5
202D447X0100A5
CL55BN441MPG
04021-26
70.0
150
A1
202D706X0150A1
CL55BQ700MPG
04021-27
90.0
150
A2
202D906X0150A2
CL55BQ900MPG
04021-28
100.0
150
A3
202D107X0150A3
CL55BQ101MPG
04021-29
140.0
150
A4
202D147X0150A4
CL55BQ141MPG
04021-30
180.0
150
A5
202D187X0150A5
CL55BQ181MPG
04021-31
Note
(1) Vishay is no longer qualified to provide military CL55 type which has been discontinued. 
It has been replaced by an equivalent product built to DSCC drawing 04021
Revision: 30-Jul-14
Document Number: 40027
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000