Detector Switches/ESE16 1VR Detector Switches Type: ESE16 ■ Features ■ Recommended Applications ● External Dimensions: 2.2 mm×3.35 mm (Height:1.5 mm) ● Light operating force: 250 mN or less ● Auto mounting supported: Can be mounted by standard nozzles ● Detection of media in portable electronic equipment (Mobile phones / Digital still cameras / Camcorders) ■ Explanation of Part Numbers 1 2 3 4 5 & 4 & Product Code 6 7 Type 8 9 Design No ■ Specifications Rating 50 μA 3 Vdc to 10 mA 5 Vdc (Resistive load) Contact Resistance 500 mΩ max. (Initial) Insulation Resistance 10 MΩ min. (100 Vdc) Dielectric Withstanding Voltage 100 Vac for 1 minute Operating Force 250 mN max. Mounting Height 1.5 mm Poles and Throws 1-pole 1-throw Full Travel (Pushing distance) 1.5 mm (1.0 mm) Operating Life 50000 cycles min. Temperature Range –10 °C to +60 °C Heat Resistance +70 °C for 96 hours Low Temperature Resistance –25 °C for 96 hours Humidity Resistance +40 °C 90 % to 95 % RH for 96 hours Minimum Quantity/Packing Unit 4000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 24000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – ES28 – Detector Switches/ESE16 ■ Dimensions in mm (not to scale) 2.2 2.65 max. ESE16 1-pole 1-throw PWB land pattern reference (Pitch tolerance: ±0.05) 1.4 3.35 0.45 1.5 1.5 2.2 2.5 Vertical direction ON starting position Full stroke position ■ Circuit Diagram 1-pole 1-throw (N.O) Separate terminal Dummy terminal Separate terminal Dummy terminal ■ Packaging Specifications Standard Reel Dimensions in mm (not to scale) Taping Reel 16.4 END P=8.0±0.1 4.0±0.1 2.0±0.1 Drawing direction Leading portion 400 mm min TOP Pilot holes 16.0 .1 +0 0 Carrier tape .5 – f1 7.5±0.1 1.75±0.1 f380.0±2.0 Embossed Carrier Taping Non-packed portion Packed portion (160 mm min.) Non-packed portion (100 mm min.) Cover tape Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – ES29 –