Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVPB Features ● Low profile (Height 5 mm max.) compliance, Halogen free ● RoHS Specifications Size code Category temperature range Rated voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Damp heat (Steady State) C5 C55 –55 °C to +105 °C 2.5 V.DC to 20 V.DC 15 µF to 120 µF 20 V.DC 22 µF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list +105 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value (±30 % for C5 size) tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W – Series + L R. Capacitance R. Voltage Size code fD±0.5 C5 C55 6.3 6.3 C H fD P Polarity marking (−) Lot. No. L +0.1 −0.4 R W±0.2 H±0.2 C±0.2 4.9 5.4 6.6 6.6 6.6 6.6 7.3 7.3 Unit : mm R P±0.2 0.6 to 0.8 0.6 to 0.8 2.1 2.1 ✽ Externals of figure are the reference. Characteristics list Rated Rated Series voltage capacitance (V.DC) (µF) SVPB 2.5 4.0 6.3 10 16 20 120 100 82 56 33 15 22 Case size (mm) fD L 6.3 6.3 6.3 6.3 6.3 6.3 6.3 4.9 4.9 4.9 4.9 4.9 4.9 5.4 Size code C5 C55 Specifications Ripple ✽1 ESR ✽2 current tan d ✽3 (mΩ max.) (mAr.m.s.) 1670 40 0.12 1670 40 0.12 1670 40 0.12 1670 40 0.12 1670 40 0.12 2000 45 0.12 2000 35 0.12 LC ✽4 (µA) 120 160 207 224 211 120 88 Standard (Reel size : f380) Min. Packaging Q'ty Part number (pcs) 2R5SVPB120M 1300 4SVPB100M 1300 6SVPB82M 1300 10SVPB56M 1300 16SVPB33M 1300 20SVPB15M 1300 20SVPB22M 1000 ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015