Light Touch Switches/EVQP6/6P6/7P6/9P6 4 mm Square SMD Light Touch Switches Type: EVQP6/EVQ6P6/EVQ7P6/EVQ9P6 ■ Features ■ Recommended Applications ● External dimensions : 4.1 mm×4.1 mm Height :Without Push Plate 0.35 mm, With Push Plate 0.58 mm :Without Push Plate·With Ground Terminal 0.43 mm ● Long-life :1000000 cycles min. (Operating Force 1.6 N Type) ● Dust-proof structure ● Operating switches for portable electronic equipment (Mobile phones, Camcorders, Portable audio players, etc.). ■ Explanation of Part Numbers 1 2 3 & 7 2 4 5 6 7 8 Product Code 9 Height 4th, 5th, 6th P6< 6P6 7P6 9P6 Type · With Push Plate, Without Push Plate · Without Grounf Terminal · Without Push Plate · With Grounf Terminal ■ Product Chart Without Push Plate H=0.35 mm With Push Plate H=0.58 mm Without Push Plate With Ground Terminal H=0.43 mm Embossed Embossed Embossed 1.0 N — — EVQ7P6 1.6 N EVQP6D EVQP6L EVQ6P6 2.4 N EVQP6P EVQP6Y EVQ9P6 Height Packaging Operating Force ■ Specifications Snap action / Push-on type SPST Type Without Push Plate Rating 10 μA 2 Vdc to 20 mA 15 Vdc (Resistive load) Contact Resistance Electrical 500 mΩ max. Insulation Resistance 50 MΩ min. Dielectric Withstanding Voltage Mechanical Endurance With Push Plate 100 Vac for 1 minute Bouncing 3 ms max. (ON) 10 ms max. (OFF) Operating Force 1.0 N, 1.6 N, 2.4 N Travel 0.2 mm (EVQ7P6 : 0.15 mm) 1.0 N, 1.6 N : 1000000 cycles min. 2.4 N : 500000 cycles min. Operating Life Operating Temperature –20 °C to +70 °C Storage Temperature –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Minimum Quantity/Packing Unit 10000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 50000 pcs. Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2016 – ES66 – Light Touch Switches/EVQP6/6P6/7P6/9P6 ■ Dimensions in mm (not to scale) No. 1 EVQP6D EVQP6P (4.3) 4.1±0.2 0.35 Marking= A' B B' (0.6) (1.7) Surface mount For reflow soldering Without push plate A 0.6 2.9 4.1±0.2 A A' B B' Circuit diagram 0.25 (1.6) 4.7 3.7 (1.4) (1.6) A' (5-f0.4) B (1.4) (2.4) (3.7) PWB land pattern for reference Operating Force 1.6 N 2.4 N EVQP6L EVQP6Y Height 0.35 mm 0.35 mm Operating Life 1000000 cycles 500000 cycles 0.58 (4.3) 4.1±0.2 0.43 8 f1. 4.1±0.2 2.9 0.6 (Embossed Taping) Surface mount For reflow soldering With push plate B' Part of A-A' terminal is exposed at area. Any land pattern or vias shall not be provided at area. =Marking varies according to push force. Part Numbers EVQP6DB35 EVQP6PB35 No. 2 A' (0.8) (0.85) A A (0.85) B' (1.4) (1.9) (1.5) (1.5) (1.4) B 2.2 3.6 (3) (1.3) (Embossed Taping) A A' f2.6 B B B' (0 .8) A B' A' 0.25 Circuit diagram A A' B' B (2-1.6) PWB land pattern for reference Any land pattern or vias shall not be provided at area. (1.6) Part Numbers EVQP6LB55 EVQP6YB55 (1.5) (2.6) (2-0.8) (1.4) (1.9) B' (0.85) (1.5) B A' A 2.2 3.6 (3.7) (2.4) (1.4) (5-f0.4) (1.5) (1.4) 4.7 3.7 Operating Force 1.6 N 2.4 N Height 0.58 mm 0.58 mm Operating Life 1000000 cycles 500000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2016 – ES67 – Light Touch Switches/EVQP6/6P6/7P6/9P6 ■ Dimensions in mm (not to scale) No. 3 (2.2) A' B B' f2.6 0.25 B B' A A' Circuit diagram 0.43 0.38 –0.1 +0.15 4.7 3.7 0.7 A Operation point (3.7) (2.4) (1.4) (5-f0.4) 2.35 2.05 GND (0.8) B' (1.4) (1.9) B' A A' (1.6) PWB land pattern for reference Part of B-B' terminal is exposed at area. Any land pattern or vias shall not be provided at area. (0.85) (1.5) (1.4) (1.5) B B A' 2.2 3.6 Surface mount For reflow soldering Without push plate With Ground Terminal A (0.75) (1.3) (Embossed Taping) 4.1±0.2 2.9 0.6 EVQ7P6 EVQ6P6 EVQ9P6 (4.3) 4.1±0.2 (0.5) (1.6) Part Numbers Operating Force Height Operating Life EVQ7P6B40 1.0 N 0.43 mm 1000000 cycles EVQ6P6B40 1.6 N 0.43 mm 1000000 cycles EVQ9P6B40 2.4 N 0.43 mm 500000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2016 – ES68 – Light Touch Switches/EVQP6/6P6/7P6/9P6 ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. 230 180 Tape width=12.0 mm t1 150 Feeding hole Chip pocket P2 P0 E fD0 F W A B Operation Top (°C) MAX. 260 (Normal Temp.) 90±30 40±10 t2 P1 Chip component Tape running direction Soldering Time (s) Unit: mm Part No. Height EVQP6 0.35/0.58 EVQ6P6 EVQ7P6 EVQ9P6 0.43 A B W 4.0±0.2 5.0±0.2 12.0 –0.1 +0.3 F E P1 P2 P0 D0 Dia. 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5 –0 Item A +0.1 t1 t2 +0.2 0.30±0.05 0.5/0.7 –0.1 ● Standard Reel Dimensions in mm (not to scale) T E B Rate (mm) 0380.0±2.0 080.0±1.0 C C D E 013.0±0.5 021.0±1.0 2.0±0.5 W T t r 13.5±1.5 17.5±1.0 1.0 to 3.0 1.0±0.5 B Item Rate (mm) D r A t W ■ Recommended Shape of Test Pole Without Push Plate ■ Recommended Operating Conditions Without Push Plate With Push Plate With Push Plate 0.3 mm max. f0.8 1.3 f1.5 Test pole R0.1±0.05 Leaning angle range 90 °±4 ° (vertical direction) Switch R0.1±0.05 R0.1±0.05 Mounting surface Slant 0.3 mm max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2016 – ES69 –