D-configuration Connectors for Digital Broadcasting Equipment DXLM Series Accepts panel thickness up to 3 mm 3 5.2 DXM Series (Panel thickness up to 1.6 mm thick) 6.7 DXLM Series Features Effective protection against electrostatic discharge 1. Increased range of the mounting panel thickness Extension of the mating and locking area by 1.5 mm has allowed the DXLM Series to be mounted on panels up to Static electricity Shell 3mm thick. 2. Effective protection against electrostatic discharge Unique Hirose Electric design makes reliable ground connection in sequence, with metal shell first, then the board circuit. 3. Temporary board holding feature Deflecting force of the side protrusion of the insulator’s To board posts against the walls of holes provides superior retention to the board, preventing leaning forward during handling. 4. Superior stability and retention to the board Solid metal grounding posts are soldered to the board. This creates extremely strong retention to the board, Superior stability and retention to the board allowing the assembly to retain reliable connections, even when large forces are applied when miss-mating or pulling. 5. RC-5237, EIAJ Standard Conforms to the requirements for D-configuration connector used in connections for digital image broadcast. Insulator's post Metal grounding post Applications TV, STB, DVD, LCD TV and other equipment supporting digital Side protrusion broadcasts 2002.11 1 Product Specifications Current rating 1 A DC o Operating temperature range Rating Voltage rating o -25 C to +70 C 250 V AC Specification Item Conditions 1. Contact resistance 80 m ohms max. Measured at 100mA DC 2. Insulation resistance 500 M ohms min. Measured at 500 V DC 3. Withstanding voltage No flashover or insulation breakdown 500 V AC applied for one minute 4. Mating/un-mating forces 30N max. (mating) 4.2N min. (un-mating) With corresponding connector assembly. 5. Durability (mating/un-mating) Contact resistance: 25 m ohms max. variation from initial value 500 No damage, cracks, or parts dislocation 7. Shock No electrical discontinuity of 1 ms or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours / 3 axis No damage, cracks, or parts dislocation Acceleration of 490 m/s2, 6 ms duration, sine half-wave wave form, 3 cycles in each of the 3 axis 8. Humidity (Steady state) Contact resistance: 25 m ohms max. variation from initial value 96 hours at 40oC, humidity of 90% to 95% Insulation resistance: 100 M ohms min. 9. Temperature cycle Contact resistance: 25 m ohms max. variation from initial value Temperature: -25 C --> +5 C to +35 C --> +70 C --> +5 C to +35 C Duration: 30 --> 2 to 3 --> 30 --> 2 to 3 (Minutes) Insulation resistance: 100 M ohms min. 10. Salt Spray Contact resistance: 25 m ohms max. variation from initial value Exposed to 5% salt water solution for 48 hours 6. Vibration o o o o o o Material Finish Remarks Contact: Receptacle Brass Selective gold plating Contact: Plug Phosphor bronze Selective gold plating . . Insulator PBT Color: Black UL94V-0 Shell Stainless steel . Cover PVC Color: Gray Cable outer insulation PVC Color: Gray . . . Part Material Ordering Information Receptacles DX 1 10 LM 2 1 1 . 14 S E 4 5 6 3 Plugs DX 40 LM 1 2 1 . 14 PP . 150 4 7 1 Series name: DXLM 2 Termination type 10: PCB Right-angle through hole type 20: PCB Straight through hole type 40: Soldering type 3 Form type Blank: Standard item 1: Miniature type 2: Miniature panel single screw panel attachment 4 Number of Positions: 14 5 Configuration of mating side S: Receptalce 2 8 6 CV 9 Board mounting type E: Temporary insulator’s post 7 Cable Harness type PP: D-configuration connector at both ends P: D-configuration connector on one end/single audio connectors on other end 8 Overall length 150: 150 cm 300: 300 cm 9 Cover type CV: Standard Receptacles 5 6.3 15 PCB Right-angle through hole type 17.14 19.54 36 29 7.62 1.27 4 3 10.6 No.1 5.6 No.7 No.8 No.14 3 15.94 Part Number CL No. DX10LM-14SE 230-5256-0 5 6 9 5 6.3 11.5 Miniature PCB Right-angle through hole type 17.14 19.54 22.54 7.62 No.1 3 3.9 9.3 1.27 4.8 No.7 No.14 15.94 Part Number CL No. DX10LM1-14SE 230-5258-5 No.8 3.985 4.785 6.69 8.595 3 5 6.3 11.5 Miniature PCB Right-angle through hole type (Single panel screw) 17.14 19.54 22.54 12.26 7.62 1.27 No.1 9.7 16.45 9.3 3 3.9 4.8 11.65 8.1 No.7 No.14 Part Number CL No. DX10LM2-14SE 230-5262-2 15.94 3.985 No.8 4.785 6.69 8.595 10.5 PCB Straight through hole type (Double panel screws) 38 29 7.62 1.27 No.1 12 No.7 No.8 No.14 19.54 5 230-5257-2 6.3 DX20LM-14SE 15 CL No. 3 Part Number 4 17.14 15.94 34.4 4 Plug Connectors (Cable assemblies) Wiring Table D-configuration connector to D-configuration connector Shorted Connector A Contact No. Connector B Contact No. Pin assignment 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Y Y-GND Pb Pb-GND Pr Pr-GND Auxiliary line 1 Line 1 Line 2 Auxiliary line 2 Line 3 Switch GND Auxiliary line 3 Switch Unit: cm CL No. L DX40LM-14PP-150CV 230-5260-7 150 DX40LM-14PP-300CV 230-5268-9 300 12.5 MAX. Part Number Contact No. 14 Contact No. 14 Contact No. 7 Connector B Connector A 26.2MAX. Contact No. 7 Contact No. 8 Contact No. 1 Contact No. 8 Contact No. 1 42 42 L Wiring Table Connector A Connector B: Green Connector C: Blue Connector D: Red Pin assignment Contact No. Contact No. Contact No. Contact No. Shorted Unit: cm CL No. L DX40LM-14P-150CV 230-5261-0 150 DX40LM-14P-300CV 230-5269-1 300 1 2 . . . . . . . . . . . . . . 3 4 . . . . . . . . . . . . . . 5 6 . . . . . . . . Y Y-GND Pb Pb-GND Pr Pr-GND . . . . . . . . o/11.7 12.5MAX. Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Connector B: Green Contact No. 14 26.2MAX. Contact No. 7 Contact No. 1 Connector A Contact No. 2 Connector C: Blue Contact No. 1 Contact No. 4 Contact No. 3 Contact No. 6 Contact No. 5 Contact No. 8 Connector D: Red 5 SBoard Mounting Pattern 29 15.94 15.94 7.62 .6 o/ 2 2- 1.1 9 6 2.8 3 5 11 No.1 No.2 1.27 o/ 4- 2 2. No.9 No.8 Board edge No.14 No.13 3.81 5.715 No.2 7.62 0.8 4.5 No.6 1.905 No.6 No.7 14 - /o 0.8 No.1 5.4 .2 14.24 1.27 2. 8 /o 3 No.7 - /o 0. 9 2/o 2- 14 No.14 2.15 No.13 Board edge 23 2- o /2 No.8 .2 No.9 DX10LM1.14SE DX10LM2.14SE DX10LM.14SE 34.4 15.94 7.62 1.27 No.6 /o 2 No.2 .8 No.1 4- /o 2 .2 9 3 2- 14 No.7 - /o 0. 9 No.8 No.14 No.9 No.13 DX20LM.14SE SPanel Cutout (Panel thickness 3 mm Max.) 21.5 29 21.5 2- 2- 5 . R0 4- /o 3 .3 21.5 0.5 0.5 4-R 4-R /o 3 DX10LM.14SE DX20LM.14SE DX10LM1.14SE 8.5 8.5 8.5 .3 DX10LM2.14SE Note: Use screw M3 x 10 ( class 1 or 2). Panel screw fastening torque: For assemblies DX10LM-14SE, DX20LM-14SE and DX10LM1-14SE: 0.5 to 0.7 Nm. For assembly DX10LM2-14SE: 0.6 to 0.8 Nm. 6 MEMO : 7