ATK0000CE31

Light Touch Switches/EVPAF
3.0 mm쎹2.6 mm SMD Light Touch Switches
Type:
EVPAF
■ Features
● External dimensions: 3.0 mm҂2.6 mm, Height 0.65 mm
● High operability
Equipped with an actuator (push plate)
● Low temperature use
■ Recommended Applications
● Operation switches for portable electronic equipment
(Mobile phone, Portable audio)
■ Explanation of Part Numbers
1
2
3
4
5
E
V
P
A
F
Product Code
6
Type
7
8
9
Height
■ Specifications
Type
Snap action/Push-on type SPST
Rating
10 µA 2 Vdc to 20 mA 15 Vdc (Resistive load)
Contact Resistance
Electrical
500 m액 max.
Insulation Resistance
50 M액 min. (at 100 Vdc)
Dielectric Withstanding Voltage
250 Vac for 1 minute
Bouncing
10 ms max. (ON, OFF)
Operating Force
1.3 N, 1.6 N, 2.4 N, 3.4 N
Mechanical
Travel
Endurance
Operating Life
0.15 mm
1.3 N, 1.6 N, 3.4 N : 100000 cycles min., 2.4 N : 500000 cycles min.
Operating Temperature
–40 °C to +85 °C
–40 °C to +85 °C (Bulk)
–20 °C to +60 °C (Taping)
Storage Temperature
Minimum Quantity/Packing Unit
8000 pcs. Embossed Taping (Reel Pack)
Quantity/Carton
40000 pcs.
Note: Non washable
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES83 –
00
Oct. 2012
Light Touch Switches/EVPAF
A'
A
4-0.5
2-1.8
2.6
(Embossed Taping)
With J-bent terminals
B
B'
φ0.65
( 0.75)
(Adhesive)
0.44
A
A'
B
B'
Circuit diagram
(
4-0.35
2-3.4
EVPAFKB65
4-0.35 +0.1
–0.15
)
(Push plate)
0.65
2-1.2±0.05
3
EVPAF
(0.65)
2-3.5±0.05
2-2.4±0.05
1.6
(0.4)
A'
2.6
(1.15)
(0.8)
A
2-2.4±0.05
No. 1
(Without the remainder of the gate)
■ Dimensions in mm (not to scale)
B
(1.5)
(2-2.5)
B'
PWB land pattern for reference
Part of A-A' terminal is exposed at
area.
Any land pattern or vias shall not be provided at
area.
Operating Force
Height
Operating Life
EVPAFKB65
1.3 N
0.65 mm
100000 cycles
EVPAFFB65
No. 2
1.6 N
0.65 mm
100000 cycles
3
A'
4-0.5
2-1.8
2.6
With J-bent terminals
B
B'
φ0.65
( 0.75)
(Adhesive)
(Push plate)
2-3.4
A
A'
B
B'
Circuit diagram
2-1.2±0.05
A
0.48
4-0.35
(Embossed Taping)
0.70
(0.65)
2-3.5±0.05
2-2.4±0.05
1.6
(0.4)
A'
2.6
(1.15)
(0.8)
A
B
(1.5)
(2-2.5)
B'
2-2.4±0.05
EVPAF
(Without the remainder of the gate)
Part Numbers
PWB land pattern for reference
Part of A-A' terminal is exposed at
area.
Any land pattern or vias shall not be provided at
Part Numbers
Operating Force
Height
area.
Operating Life
EVPAF5B70
3.4 N
0.7 mm
100000 cycles
EVPAF7B70
2.4 N
0.7 mm
500000 cycles
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES84 –
00
Oct. 2012
Light Touch Switches/EVPAF
A'
4-0.5
2-1.8
2.6
A
Low profile
(Embossed Taping)
B
B'
φ0.65
(Push plate)
2-3.4
2-3.5±0.05
2-2.4±0.05
1.6
A
A'
B
(1.15)
(0.8)
(0.65)
(0.4)
2.6
( 0.75)
(Adhesive)
A'
B
B'
B'
PWB land pattern for reference
(1.5)
(2-2.5)
Part Numbers
A
Circuit diagram
4-0.3 +0.15
–0.1
With J-bent terminals
0.39
2-1.2±0.05
EVPAF
0.65
2-2.4±0.05
3
(Without the remainder of the gate)
No. 3
Part of A-A' terminal is exposed at
area.
Any land pattern or vias shall not be provided at
area.
Operating Force
Height
Operating Life
EVP0AFB65
1.6 N
0.65 mm
500000 cycles
EVPAF7B65
2.4 N
0.65 mm
500000 cycles
EVPAF5B65
3.4 N
0.65 mm
100000 cycles
MAX.
260
230
180
● Embossed Carrier Taping
Fan or Normal Temp.
Tape width=12.0 mm
t1
Feeding hole
Chip pocket
P2 P0
fD0
E
150
F
W
A
B
Operation Top (°C)
■ Recommended Reflow Soldering Conditions
(Normal Temp.)
90±30
40±10
Soldering Time (s)
Part No.
EVPAF
EVP0AF
Height
A
0.65/0.70
B
t2
W
3.75±0.2 2.95±0.2 12.0±0.3
P1
Chip component
Tape running direction
Unit: mm
t2
F
E
P1
P2
P0
D 0 Dia
t1
5.5±0.1
1.75±0.1
8.0±0.1
2.0±0.1
4.0±0.1
1.5±0.3
0.3±0.1
0.8±0.2
■ Recommended Shape of Test Pole
● Standard Reel Dimensions in mm (not to scale)
T
E
B
C
D
r
f1.5 to f2.0
A
Item
A
W
B
Rate (mm) φ380.0±2.0 φ80.0±1.0
Item
Rate (mm)
W
13.5±1.0
t
C
D
E
φ13.0±0.5
φ21.0±1.0
2.0±0.5
T
t
r
17.5±1.0
_
_
R0.3 mm±0.05 mm
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES85 –
00
Oct. 2012