Metal Film Fusing Resistors Metal Film Fusing Resistors Type: ERQA ERQZ (0.25 W, 0.5 W, 1 W, 2 W coating type ) Features ● Accurate fusing size and lightweight ● Uniform quality, consistent performance and reliability ● Flame retardant, utilizing exclusive silicon insulation material ● Reference Standard EIAJ RC-2125 ● RoHS compliant ● Small Explanation of Part Numbers 1 2 3 E R Q Product Code Metal Film Fusing Resistors Power Rating at 70 °C amb. 0.25 W 14 0.5 W 12 1 2 1W 2W 4 5 6 7 8 9 10 11 2 A B J 1 0 1 Special Feature A Standard Z Less than 2 Ω AB Z Standard Less than 2 Ω Resistance Tolerance J ±5 % Resistance Value The first two digits are significant figures of resistance and the third one denotes number of zeros following.Decimal point is expressed by R as 2.2=2R2. 12 Suffix for Packaging and/or Cut & Formed Leads Nil P P···S E W···E Std.bulk packing P type cut & formed P···S type cut & formed Radial Taped & Box Radial Taped & Box The above example shows a standard Metal Film Fusing Resistors, 2 W power rating, resistance value of 100 Ω, tolerance of ±5 %, and package of standard bulk packing. Construction Metal alloy film Lead wire Spiraling turns Insulative lacquer Ceramic core Marking End cap Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014 Metal Film Fusing Resistors Ratings Part No. ERQ14Z ERQ14A ERQ12Z ERQ12A ERQ1Z ERQ1AB ERQ2Z ERQ2AB Power Rating at 70°C (W) Maximum Dielectric Open Maximum With- Resistance Circuit Overload standing Tolerance (1) Voltage (%) Voltage Voltage (V) (V) 0.25 200 0.5 250 1 250 2 250 3 times of rated (2) voltage AC 350 J (± 5) AC 350 J (± 5) AC 600 J (± 5) AC 1000 J (± 5) Resistance Range (Ω) min. max. 1.0 2.0 1.0 2.0 1.0 2.0 1.0 2.0 1.8 470 1.8 560 1.8 560 1.8 560 Standard Marking Mass T.C.R. Resistance Method (Weight) -6 (×10 /°C) Values on Body [g/pc.] Color code Stamp Color code 0.24 ±350 E24 ±350 E24 ±350 E24 Stamp 0.64 ±350 E24 Stamp 1.54 0.32 (1) Maximum Open Circuit Voltage: Referring to the maximum value of the voltage applied between terminals of the resistor when the resistor is opened in an electric circuit 1000 times power rating or voltage specified above whichever less is regarded as the maximum open circuit voltage. (2) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value 120 100 Rated load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. –30 °C 70 °C ERQ1 ERQ2 80 60 40 ERQ14 ERQ12 150 °C 20 0 –60 –40 –20 0 130 °C 20 40 60 80 100 120 140 160 180 200 220 Ambient temperature (°C) Performance Specifications Characteristics Specifications Rated Power Res. Value (Ω) Test Methods Limit Open within 30 seconds at 30 times the rated power 0.25 W 0.5 W 1 to 1.8 Fusing Characteristics 1W 2W Open within 30 seconds at 25 times the rated power 0.25 W 0.5 W 1W 2W 2 to 9.1 Open within 30 seconds at 16 times the rated power 0.25 W 10 to 470 0.5 W 1W 2W The test potential shall be preadjusted using a dummy re sis tor and then be subjected to the test specimens. The potential shall be readjusted within two seconds to reach the exact value of specified current. This test shall be made under the conditions at 20 °C and 65 % RH (or at a temperature of 5 °C to 35 °C and 45 to 85 % RH, only when any doubt may not be caused), and the use of sta bi lized pow er source is sug gest ed. Fus ing time shall be mea sured as the duration un til the circuit current is decreased to a 1/50 the initial test current or less. Open within 30 seconds at 10 to 560 12 times the rated power Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014 Metal Film Fusing Resistors Dimensions in mm (not to scale) Dimensions (mm) Part No. l fD l fd L 0D L +1.5 –1.0 2.3 0d k ±0.5 30.0 ±0.5 30.0 ±1.0 30.0 ±1.0 38.0 ERQ14 6.3 ERQ12 9.0 –1.0 +1.5 2.8 ERQ1 12.0 –1.0 +1.5 4.0 ERQ2 15.0 ±1.5 5.5 ±3.0 0.65 ±0.05 ±3.0 0.65 ±3.0 0.80 ±3.0 0.80 ±0.05 ±0.05 ±0.05 Explanation of Marking Type ERQ14, ERQ12 (0.25 W, 0.5 W) 1st significant figure Q Shows Fuse Resistor 2nd significant figure White color shows Fuse Resistor 1W 100ΩJ 711 Q Resistance tolerance Symbol Power rating Manufacturing Series No. 105 Multipier Type ERQ1, ERQ2 (1W, 2W) Date code (Year, Month, Week) Resistance value and tolerance Cut & Formed Type ERQ□□AJ□□□P ERQ□□ZJ□□□P S fD 4.0±1.0 h f0.65±0.05 L 0.8 1.2±0.2 3 max. Part No. Power Rating at 70 °C (W) Standard Q’ty/Packing (pcs.) Dimensions (mm) 0D L +1.5 –1.0 2.3 +1.5 2.8 ERQ14□J□□□P 0.25 2,000 6.3 ERQ12□J□□□P 0.5 2,000 9.0 –1.0 ERQ□ABJP□□□S ERQ□ZJP□□□S S 10.0 ±0.5 12.5 h ±0.5 S ±1.5 4.0 ±1.5 ±1.5 4.0 ±1.5 fD 1.0 1.4±0.2 4.0±1.5 h f0.80±0.05 L 3.5 max. Part No. Power Rating at 70 °C (W) Standard Q’ty/Packing (pcs.) Dimensions (mm) 0D L +1.5 –1.0 4.0 ±1.5 5.5 ERQ1□□JP□□□S 1 1,000 12.0 ERQ2□□JP□□□S 2 1,000 15.0 S 15.0 ±1.0 20.0 h ±1.0 ±1.5 6.0 ±1.5 ±2.0 6.5 ±1.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014 Metal Film Fusing Resistors For Panasert Automatic Insertion Machine Radial Taped & Box ERQ□□AJ□□□E ERQ□□ZJ□□□E (14A/14Z, 12A/12Z, 1AB/1Z) Insulated Lead P P2 H1 A D P1 W1 H0 F W fd fD0 P0 Dimensions (mm) Dimensions (mm) Dimensions (mm) P 12.7±1.0 W 18.0±0.5 P0 12.7±0.3 W1 9.0±0.5 P1 3.85±0.70 P2 6.35±1.00 H0 16.0±0.5 F 5.0±0.8 0D0 4.0±0.2 ● Radial 14A/14Z H1 Dimensions (mm) 12 max. 12A/12Z 15.5 max. 1AB/1Z Dimensions (mm) +0.65 –0.35 14A/14Z 6.35 A 19 max. 12A/12Z 9.0+1.5 –1.0 1AB/1Z 12.0+1.5 –1.0 0d 14A/14Z 2.3±0.5 D 12A/12Z 2.8±0.5 1AB/1Z 4.0±1.0 0.65±0.05 Tape Packaging Methods Dimensions (mm) a b c Standard Quantity (pcs./box) 46 130 335 2,000 pcs./box 46 130 335 2,000 pcs./box 49 100 335 1,000 pcs./box Part Number b ERQ14AJ□□□E ERQ14ZJ□□□E ERQ12AJ□□□E ERQ12ZJ□□□E ERQ1ABJ□□□E ERQ1ZJ□□□E Marking c a For Panasert Automatic Insertion Machine Radial Taped & Box ERQ□□A/ZJW□□□E (14A/14Z, 12A/12Z, 1AB/1Z) P1 Dimensions (mm) P P B fD A H1 P0 P1 F H0 P2 W1 P2 W F fd P0 fD0 14A/14Z 12.7±1.0 12A/12Z, 1AB/1Z 30.0±1.0 14A/14Z H1 12.7±0.3 12A/12Z, 1AB/1Z 15.0±0.3 0D0 14A/14Z 6.35±1.00 12A/12Z, 1AB/1Z 7.5±1.0 14A/14Z 3.85±0.70 A 12A/12Z, 1AB/1Z 3.75±0.50 14A/14Z 5.0+0.6 –0.2 12A/12Z, 1AB/1Z 7.5+0.6 –0.2 W 18.0±0.5 W1 9.0±0.5 H0 Dimensions (mm) B 0D 14A/14Z 6.5+0.6 0 12A/12Z 6.5+1.0 0 1AB/1Z 6.5+1.0 0 4.0±0.2 14A/14Z 6.35+0.65 –0.35 12A/12Z 9.0+1.5 –1.0 1AB/1Z 12.0+1.5 –1.0 14A/14Z 11.2 max. 12A/12Z 14 max. 1AB/1Z 17 max. 14A/14Z 2.3+0.5 –0.3 12A/12Z 2.8±0.5 14A/14Z 16.0±0.5 1AB/1Z 4.0±1.0 12A/12Z 18.0±1.0 14A/14Z 0.65±0.05 1AB/1Z 18.0±1.0 0d 12A/12Z, 1AB/1Z 0.80±0.05 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014 Metal Film Fusing Resistors Fusing Characteristics (Constant Voltage Circuit) This data is for reference only, specifications should be verified in written form with the engineering division. ERQ14A 200 ERQ12A 200 2.0 to 9.1 (Ω) 2.0 to 9.1 (Ω) 10 to 560 (Ω) 100 100 50 50 Fusing time (s) Fusing time (s) 10 to 470 (Ω) 30 10 5 1 30 10 5 0 7 9 12 16 20 25 Multiple of the power rating ERQ1AB 200 1 30 0 9 ERQ2AB 200 2.0 to 9.1 (Ω) 7 10 to 560 (Ω) 100 50 50 Fusing time (s) Fusing time (s) 30 2.0 to 9.1 (Ω) 10 to 560 (Ω) 100 30 10 5 1 12 16 20 25 Multiple of the power rating 30 10 5 0 7 9 12 16 20 25 Multiple of the power rating 1 30 0 7 9 12 16 20 25 Multiple of the power rating 30 Hot Spot Temperature (for reference) Temperature rise △T (K) 600 500 2AB 400 Measuring point 1AB 300 12A 200 100 14A 0 0 1 2 3 4 5 6 7 8 Multiple of the power rating 9 10 11 12 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014 Metal Film Fusing Resistors Safety Precautions The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors in this catalog. 1. Checking the fusing conditions 1) Fusing characteristics differ depending on the type, shape, and resistance. Check the fusing conditions before selecting the type of Metal Film Fusing Resistors (hereafter called the fusing resistor) to be used. 2) Use the fusing resistors under the maximum open circuit voltage. Otherwise, arcing may occur when a voltage much higher than the rated one is applied in the event of an abnormality in the circuit, or when a high voltage is applied after fusing. 3) Under abnormal conditions of a constant voltage circuit, a current of about 2 or 3 times the initial abnormal current passes through, accelerating the speed at which the fusing resistors blows. When using a constant current circuit, carefully check the conditions because the fusing resistors may not blow in a constant current circuit. 2. Checking for pulse voltage, impact voltage, and transient voltage Make sure to evaluate and check the fusing resistors mounted on your product if they are to be mounted on a circuit that generates an impact voltage, or if there is a possibility that the transient phenomenon (significantly high voltage applied in a short time) may occur or that a pulse voltage with a high peak voltage may be applied. Make sure to consult our sales staff before using the fusing resistors under special conditions. 3. Conditions of use in a steady state Make sure that the load conditions have a sufficient allowance for the power derating curve. The characteristics of the fusing resistors are set by using a constant voltage circuit. 4. The solvent resistance of the fusing resistors is not assured. If you use a solvent for cleaning after soldering or other processes, make sure to consult our sales staff before use and per form a prior test and evaluation to ensure that the solvent will not affect the reliability of the fusing resistors. (Data for Reference) Pp (Vp) Pulse Characteristics (Usual) t T PP VP t T VR P R Vp max. : : : : : : : : Withstand pulse limit power is calculated by the next method. PP = K · P · T/t VP = √ K · P · R · T/t Reference to the right about a fixed number of VP max. Pulse limit power (W) Pulse limit voltage (V) Pulse continuous time (s) Period (s) Rated voltage (V) Rated power (W) Resistance value (Ω) Max. pulse limit voltage (V) Part No. K Vp max. (V) ERQ14A 0.6 200 ERQ12A 0.6 250 ERQ1AB 0.6 250 ERQ2AB 0.4 250 ● T>1(s) → T=1(s) ● T/t>100 → T/t=100 ● PP<P → P stands for PP (VP<VR → VR stands for VP) ● Added voltage<Vp max. ● PP or VP is reference value Conditions : Pulse added time=1000 h, Resistance change=±5 % Room temperature Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014