SURFACE MOUNT FAST SWITCHING RECTIFIER RS2A THRU RS2M VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere FEATURES • • • • • • DO-214AA(SMB) Plastic package has underwrites laboratory flammability Classification 94V-0 Low profile surface mount package Built-in strain relief Fast switching for high efficiency Glass Passivated chip junction High temperature soldering: 250℃/10 second at terminals MECHANICAL DATA • • • Case: JEDED DO-214AA molded plastic over glass passivated chip Terminals: Solder plated, Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified MAXIMUM RATINGS & THERMAL CHARACTERISTICS PARAMETELS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL =100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) T L=100℃ Typical Thermal Resistance (NOTE 1) Operating and Storage Temperature Range SYMBOLS VRRM VRMS VDC RS2A 50 35 50 RS2B 100 70 100 RS2D 200 140 200 RS2G 400 280 400 RS2J 600 420 600 RS2K 800 560 800 RS2M 1000 700 1000 UNIT Volts Volts Volts IF(AV) 2.0 Amps IFSM 50 Amps RθJA RθJL TJ,TSTG 55 18 -55 to +150 ℃/W ℃ ELECTRICAL CHARACTERISTICS PARAMETELS Maximum Instantaneous Forward Voltage at 2.0A Maximum DC Reverse Current at rated DC Blocking Voltage TA = 25℃ TA = 125℃ Typical Reverse Recovery Time IF=0.5A, IR=1.0A, IRR=0.25A, SYMBOLS VF RS2A RS2B RS2D IR Trr RS2G 1.30 5.0 200 150 CJ 30 Notes: 1. Thermal resistance from Junction to ambient and from junction to lead mounted on P.C.B. with 0.27×0.27″(7.0 × 7.0mm) copper pad areas. Typical junction capacitance at 4.0V, 1MHz Web Site: www.hkmic.com RS2J RS2K RS2M UNIT Volts µA 250 500 ns pF SURFACE MOUNT FAST SWITCHING RECTIFIER RS2A THRU RS2M VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere 60Hz RESISTIVE OR INDUCTIVE LOAD 3.0 2.0 1.0 P.C.B.MOUNTED 0.27X0.27″(7.0X7.0mm) COPPER PAD AREAS 0 50 60 70 80 90 100 110 120 130 140 150 160 F1G.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 TL =100℃ 8.3ms Single Half Sine-Wave (JEDEC Method) 40 AMPERES AVERAGE FORWARD CURRENT AMPERES F1G.1-FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, RATINGS AND CHARACTERISTIC CURVES RS2A THRU RS2M 30 20 10 0 1 LEAD TEMPERATURE,(℃) 10 100 NUMBER OF CYCLES AT 60 Hz F1G.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 20 10 TJ =25℃ Pulse Width=300us 1% Duty Cycle 1.0 0.1 TJ =125℃ 10 1.0 TJ =25℃ 0.01 0.4 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS F1G.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) F1G.4-TYPICAL REVERSE CHARACTERISTICS 100 100 TJ =25℃ f=1MHz Vsig=50mVp-p 10 1.0 10 100 REVRESE VOLTAGE, VOLTS Web Site: www.hkmic.com 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 100