SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER S1A THRU S1M VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES • • • • • • DO-214AC(SMA) For surface mounted applications Glass passivated junction Low profile package Built-in strain relief, ideal for automated placement Plastic package has underwrites laboratory flammability Classification 94V-0 High temperature soldering guaranteed: 250℃/10 second at terminals MECHANICAL DATA • • • • • Case: JEDED SMA (DO-214AC) molded plastic Terminals: Plated axial lead solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (see Fig.1) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) T L=90℃ SYMBOLS VRRM VRMS VDC S1A 50 35 50 S1B 100 70 100 S1D 200 140 200 S1G 400 280 400 S1J 600 420 600 S1K 800 560 800 S1M 1000 700 1000 UNIT Volts Volts Volts IF(AV) 1.0 Amps IFSM 30 Amps Maximum Instantaneous Forward Voltage at 1.0A VF IR 1.1 5.0 50 50 90 1.8 -55 to +150 Volts Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage at T = 125℃ A Typical Junction Capacitance (NOTE 1) Typical Thermal Resistance (NOTE 2) Operating and Storage Temperature Range RθJA RθJL trr TJ,TSTG µA ℃/W µs ℃ Notes: 1. Thermal resistance from Junction to ambient and from junction to lead mounted on 0.2×0.2″(5.0 × 5.0mm) copper pad areas. 2. Reverse recovery test condition: IF=0.5A, IR=1.0A, Irr=0.25A Web Site: www.hkmic.com SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER S1A THRU S1M 50 to 1000 Volts CURRENT 1.0 Ampere F1G.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 1.2 1.0 0.8 0.6 0.4 0.2 T L =90℃ 8.3ms Single Half Sine-Wave (JEDEC Method) CURRENT,(A) Resistive or Inductive Load PEAK FORWARD SURGE AVERAGE FORWARD CURRENT(A) F1G.1-FORWARD CURRENT DERATING CURVE VOLTAGE RANGE 10 0.2X0.2″(5.0X5.0mm) Thick Copper Pad Areas 0 0 20 40 60 80 100 120 140 0 160 1 10 F1G.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 80 T J =25℃ 10 1.0 Pulse Width=300us 1% Duty Cycle 0.1 0.01 0 0.4 0.8 1.2 1.6 2.0 10 T J =125℃ 1.0 T J =75℃ 0.1 0.01 T J =25℃ 0.001 0 0 20 100 TJ =25℃ f=1MHz Vsig=50mVp-p 10 1 0.01 0.1 1.0 10 100 REVRESE VOLTAGE,(V) Web Site: www.hkmic.com 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE,(V) F1G.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) INSTANTANEOUS REVERSE Leakage CURRENT,(A) F1G.4-TYPICAL REVERSE CHARACTERISTICS TRANSIENT THERMAL IMPEDANCE(℃/W) INSTANTANEOUS FORWARD CURRENT, (A) LEAD TEMPERATURE,(℃) 100 NUMBER OF CYCLES AT 60 Hz F1G.6-TRANSIENT THERMAL IMPEDANCE 1,000 S1(K,M) 100 S1(A,J) 10 Units Mounted on 0.20X0.20″(5.0X5.0mm) X0.5mil inches (0.013mm) Thick Copper Land Areas 1 0.01 0.1 1.0 10 T, PULSE DURATION (SEC.) 100