SURFACE MOUNT GLASS PASSIVATED RECTIFIER S2A THRU S2M VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere FEATURES • • • • • • DO-214AA(SMB) Plastic package has underwrites laboratory flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief, ideal for automated placement Glass Passivated chip junction High temperature soldering guaranteed 250℃/10 second at terminals MECHANICAL DATA • • • • Case: JEDED DO-214AA molded plastic over glass passivated chip Terminals: Solder plated, Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified MAXIMUM RATINGS & THERMAL CHARACTERISTICS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL =100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) T L=100℃ Typical Thermal Resistance (NOTE 1) Operating and Storage Temperature Range SYMBOLS VRRM VRMS VDC S2A 50 35 50 S2B 100 70 100 S2D 200 140 200 S2G 400 280 400 S2J 600 420 600 S2K 800 560 800 S2M 1000 700 1000 UNIT Volts Volts Volts IF(AV) 2.0 Amps IFSM 50 Amps RθJA RθJL TJ,TSTG 53 16 -55 to +150 ℃/W ℃ ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.5A Maximum DC Reverse Current at rated DC Blocking Voltage TA = 25℃ TA = 125℃ Typical Reverse Recovery Time at IF=0.5A, IR=1.0A, IRR=0.25A, SYMBOLS VF S2A S2B IR S2D S2G 1.15 5.0 125 S2J S2K S2M UNIT Volts µA 2.0 µs CJ 30 Notes: 1. Thermal resistance from Junction to ambient and from junction to lead mounted on P.C.B.with 0.3×0.3″(8.0 × 8.0mm) copper pad areas. pF Trr Typical junction capacitance at 4.0V, 1MHz Web Site: www.hkmic.com SURFACE MOUNT GLASS PASSIVATED RECTIFIER S2A THRU S2M VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere 60Hz RESISTIVE OR INDUCTIVE LOAD 1.5 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.27X0.27″(7.0X7.0mm) COPPER PAD AREAS 0 50 60 70 80 90 100 110 120 130 140 150 F1G.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 TL =90℃ 8.3ms Single Half Sine-Wave (JEDEC Method) 40 AMPERES AVERAGE FORWARD CURRENT AMPERES F1G.1-FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, RATINGS AND CHARACTERISTIC CURVES S2A THRU S2M 30 20 10 0 1 LEAD TEMPERATURE,(℃) INSTANTANEOUS REVERSE CURRENT, MICROAMPERES F1G.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ =25℃ Pulse Width=300us 1% Duty Cycle 1.0 0.1 100 F1G.4-TYPICAL REVERSE CHARACTERISTICS 10 TJ =125℃ 1.0 TJ =100℃ 0.1 T J =25℃ 0.01 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS F1G.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 10 NUMBER OF CYCLES AT 60 Hz 100 T J =25℃ f=1MHz Vsig=50mVp-p 10 1 0.01 0.1 1.0 10 100 REVRESE VOLTAGE,(V) Web Site: www.hkmic.com 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 100