SURFACE MOUNT RECTIFIER GLASS PASSIVATED FAST RECOVERY RECTIFIER RSM101 THRU RSM107 VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES • • • • • • DO-213AB For surface mounted applications Glass passivated chip junction Low leakage current Fast switching speed Plastic package has underwrites laboratory flammability Classification 94V-0 High temperature soldering guaranteed 250℃/10 second at terminals MECHANICAL DATA • • • • Dimensions in inches and (millimeters) Case: molded plastic Polarity: band indicate cathode Mounting position: Any Weight: 0.12 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% RSM RSM SYMBOLS 102 101 Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current T T=100℃ I(AV) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at rated DC Blocking Voltage at TA = 25℃ TA = 125℃ Typical Reverse Recovery Time (NOTE 1) TJ=25℃ Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range RSM 103 200 140 200 RSM 104 400 280 400 1.0 RSM 105 600 420 600 RSM 107 1000 700 1000 RSM 106 800 560 800 UNIT Volts Volts Volts Amps IFSM 30 Amps VF 1.3 5.0 100 Volts IR Trr CJ RθJT TJ,TSTG 150 250 15 40 -55 to +150 Notes: 1. Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts DC. 3. Thermal resistance from Junction to terminal 6.0mm2 copper pads to each terminal. Web Site: www.hkmic.com µA 500 nS PF ℃/W ℃ SURFACE MOUNT RECTIFIER GLASS PASSIVATED FAST RECOVERY RECTIFIER RSM101 THRU RSM107 VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere F1G.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 1.25 PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT(A) F1G.1-FORWARD CURRENT DERATING CURVE Resistive or Inductive Load 1.0 0.75 0.5 0.25 TL=T J max 8.3ms Single Half Sine-Wave (JEDEC Method) 25 20 15 10 0 0 25 50 75 100 125 150 1 175 F1G.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 1.0 TJ =25℃ Pulse Width=300us 1% Duly Cycle 10 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 F1G.4-TYPICAL REVERSE CHARACTERISTICS 10 1.0 TJ =100℃ 10 TJ =25℃ 0.01 0 CAPACITANCE,(pF) TJ =25℃ f=1MHz Vsig=50mVp-p 10 1 10 100 REVRESE VOLTAGE, VOLTS Web Site: www.hkmic.com TRANSIENT THERMAL IMPEDANCE(℃/W) F1G.5-TYPICAL JUNCTION CAPACITANCE 100 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE,(V) 1.0 100 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS REVERSE Leakage CURRENT,(uA) INSTANTANEOUS FORWARD CURRENT, (A) LEAD TEMPERATURE,(℃) 10 F1G.6-TRANSIENT THERMAL IMPEDANCE 100 Mounted on 0.20X0.20″(5X7mm) Copper Pad Areas 10 1 0.1 0.01 0.1 1.0 10 T, PULSE DURATION, (SEC.) 100