SURFACE MOUNT FAST RECOVERY RECTIFIER RS3A THRU RS3M VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Ampere FEATURES • • • • DO-214AB(SMC) Glass Passivated chip junction Built-in strain relief Fast switching speed for high efficiency High temperature soldering guaranteed: 250℃/10 second at terminals MECHANICAL DATA • • • • • Case: Transfer molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solder plated, solderable per MIL-STD-202E method208C Polarity: Color band denotes cathode end Weight: 0.007ounce, 0.25 gram-DO-214AB (SMC) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL =100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 3.0A Maximum DC Reverse Current at rated DC blocking voltage at TA = 25℃ TA = 125℃ Typical Reverse Recovery Time Test conditions IF=0.5A, IR=1.0A, IRR=0.25A Typical Junction Capacitance (NOTE 2) Typical Thermal Resistance (NOTE 1) Operating Junction Temperature Range Storage Temperature Range SYMBOLS VRRM VRMS VDC RS3A 50 35 50 RS3B 100 70 100 RS3D 200 140 200 RS3G 400 280 400 RS3J 600 420 600 RS3K 800 560 800 RS3M 1000 700 1000 UNIT Volts Volts Volts I(AV) 3.0 Amps IFSM 100 Amps VF 1.3 10.0 250 Volts IR Trr 150 CJ RθJA RθJL TJ TSTG 250 60 50 15 -55 to +150 -55 to +150 Notes: 1. Thermal resistance from Junction to ambient and from junction to lead mounted on PCB with 0.3×0.3″(8.0 × 8.0mm) copper pad areas. 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts Web Site: www.hkmic.com µA 500 ns pF ℃/W ℃ ℃ SURFACE MOUNT FAST RECOVERY RECTIFIER RS3A THRU RS3M VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Ampere DERATING CURVE 3.0 Resistive or Inductive Load 2.5 2.0 1.0 P.C.B mounted 0.3X0.3″(8.0X8.0mm) Copper Pad Areas 0 1 50 100 150 200 PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT(A) F1G.1-FORWARD CURRENT F1G.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 T L =100℃ 8.3ms Single Half Sine-Wave 125 (JEDEC Method) 100 75 50 25 0 1 F1G.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 TJ =125℃ 10 TJ =25℃ Pulse Width=300us 1% Duty Cycle 1.0 TJ =25℃ 0.1 0 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 100 TJ =125℃ 10 TJ =75℃ 1.0 TJ =25℃ 0.1 0.01 0 RS3A-RS3B RS3J-RS3K 10 1 100 REVRESE VOLTAGE, (V) Web Site: www.hkmic.com 40 60 80 100 REVERSE VOLTAGE,(%) F1G.6-TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE(℃ /W) JUNCTION CAPACITANCE,(pF) 100 20 PERCENT OF RATED PEAK F1G.5-TYPICAL JUNCTION CAPACITANCE 10 100 F1G.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE,(V) 1.0 10 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS REVERSE CURRENT,(uA) INSTANTANEOUS FORWARD CURRENT,(A) LEAD TEMPERATURE,( ℃) 100 Mounted on 0.20X0.27″(5.0X7.0mm) Copper Land Areas 10 1 0.1 0 0.1 1.0 10 T, PULSE DURATION, (SEC.) 100