S5A THRU S5M 50V-1000V SURFACE MOUNT GLASS PASSIVATED RECTIFIER 5.0A FEATURES ! Glass Passivated Die Construction ! ! ! ! ! ! Ideally Suited for Automatic Assembly Low Forward Voltage Drop Surge Overload Rating to 100A Peak Low Power Loss Built-in Strain Relief Plastic Case Material has UL Flammability Classification Rating 94V-O Mechanical Data ! ! ! ! ! ! Case: SMC/DO-214AB, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.21 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL =100 (NOTE 3) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) T L=100 Maximum Instantaneous Forward Voltage at 5.0A Maximum DC Reverse Current at rated DC Blocking Voltage TA = 25 TA = 125 Typical Reverse Recovery Time (NOTE 1) Typical junction capacitance (NOTE 2) Typical Thermal Resistance (NOTE 3) Operating Junction and Storage Temperature Range SYMBOLS VRRM VRMS VDC S5A 50 35 50 S5B 100 70 100 S5D 200 140 200 S5G 400 280 400 S5J 600 420 600 S53K 800 560 800 S5M 1000 700 1000 UNIT Volts Volts Volts I(AV) 5.0 Amps IFSM 100 Amps VF Volts trr 1.15 10.0 250 2.5 CJ RθJL RθJA TJ,TSTG 60 47 13 -55 to +150 pF IR A s /W Notes: 1. Reverse recovery test conditions: IF =0.5A, IR =1.0A, Irr =0.25A 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts 3. Thermal resistance from Junction to ambient and from junction to lead mounted on P.C.B.with 0.3×0.3″(8.0 × 8.0mm) copper pad areas. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com S5A THRU S5M 50V-1000V SURFACE MOUNT GLASS PASSIVATED RECTIFIER F1G.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT F1G.1-FORWARD CURRENT DERATING CURVE 200 7.0 6.0 5.0 4.0 3.0 2.0 P.C.B MOUNTED on 0.3X0.3 (8.0X8.0mm) COPPER PAD AREAS 1.0 T L =100 CURRENT, AMPERES Resistive or Inductive Load PEAK FORWARD SURGE AVERAGE FORWARD CURRENT AMPERES 5.0A 8.3ms Single Half Sine-Wave (JEDEC Method) 100 0 50 60 70 80 90 100 110 120 130 140 150 160 10 LEAD TEMPERATURE,( ) 1 10 100 NUMBER OF CYCLES AT 60Hz F1G.4-TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES F1G.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 T J =25 Pulse Width=300us 1% Duty Cycle 1.0 0.1 0.01 0.6 0.7 0.8 0.9 1.0 1.1 1.2 100 TJ =125 10 1.0 T J =25 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 1.3 F1G.5-TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE( JUNCTION CAPACITANCE,(pF) /W) INSTANTANEOUS FORWARD VOLTAGE, VOLTS 100 T J =25 f=1MHz Vsig=50mVp-p 10 1 1.0 10 100 REVRESE VOLTAGE, VOLTS E-mail: [email protected] 2 of 2 F1G.6-TYPICAL TRANSIENT THERMAL IMPEDANCE 100 Mounted ON 0.20X0.27 (5X7mm) COPPER PAD AREAS 10 1 0.1 0.01 0.1 1.0 10 100 T, PULSE DURATION, SEC. Web Site: www.taychipst.com