Series 0600 Strip-Line Header w/Coined Contacts ™ FEATURES • Available with Fork- or Post-style Coined Contacts • Header to be Cut to Desired Number of Positions Required • Side-to-side and End-to-end Stackable GENERAL SPECIFICATIONS • BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon • COINED CONTACTS: Brass,1/2-hard • CONTACT PLATING: 200µ min. matte Sn plating per ASTM B545-97(2004)e1 over 50µ [1.27µ] min. Ni per QQ-N-290 –OR– 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per QQ-N-290 –OR– 200µ [5.08µ] min. Sn/Pb 90/10 per MIL-T-10727 over 50µ [1.27µ] min. Ni per QQ-N-290 • CONTACT CURRENT RATING: 2 amps • OPERATING TEMPERATURE: 221°F [105°C] for Sn & Sn/Pb plating; 257°F [125°C] for Au plating • ACCEPTS LEADS: up to 0.025 [0.64] dia. leads MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ± 0.05] dia. ORDERING INFORMATION XX-0600-X X Plating 0= Sn 0TL= Sn/Pb 1= Au Pin Style 1= Fork 2=Post Series No. of Pins 1 to 25 ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR SCREW MACHINE CONTACTS, SEE DATA SHEET 12036 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 12034 Rev. 4.1 1 of 1