Series 680 Program Header and Cover FEATURES • Complete versatility for programming within the unit itself, thus eliminating the need for DIP switches in many situations. • Available pre-programmed from Aries, or do-it-yourself using Aries Hand Tool P/N T-680. Consult Data Sheet 22002 for Programming Tool information. • Available with plain (solid) or “top-slot” press-on covers. Plain covers protect programs while “top-slot” covers allow programming of opposing pins through square openings on top. GENERAL SPECIFICATIONS • STANDARD BODY AND COVER: black UL 94V-0 Glass filled 4/6 Nylon • PINS: Brass 260 3/4-hard, ASTM B-36 CUSTOMIZATION: In addition to the standard products shown • PIN PLATING: “-T” 50-150µ [1.27µ] min. matte Sn per ASTM B545-97(2004) on this page, Aries specializes in custom design and production. e1 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290B; “-TL” 50-150µ [1.27 Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the 3.81µ] min. 60/40 Sn/Pb per SAE AMS-P-81728 over 50µ [1.27µ] min. Ni per right to change product general specifications without notice. SAE AMS-QQ-N-290B • CURRENT RATING: 1 amp • OPERATING TEMPERATURE: 221°F [105°C] ORDERING INFORMATION MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.032 ±0.002 [0.81±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED XX-680-19X XX X No. of Pins 4 thru 24 Series Interconnection Styles see below “A” # PINS PER ROW x 0.100 [2.54] +0.050 [1.27] “B” (# PINS PER ROW -1) x 0.100 [2.54] Optional Top Slot = “C” preassembled to header Style 191 only Plating T= Sn TL= Sn/Pb CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS COVER ORDERING INFORMATION XX-68X-10 No. of Pins 4 thru 24 Cover Series 655 = Plain 658 = Top Slot Cover No. Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 16005 Rev. AA