HDU, HDE Series www.vishay.com Vishay Draloric Ceramic Singlelayer DC Disc Capacitors, 4 kVDC General Purpose FEATURES • High capacitance in small sizes • Low losses • Wide range of different lead styles • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Lighting ballasts • SMPS DESIGN The capacitors consist of a ceramic disc which is silver plated on both sides. Connection leads are made of tinned copper having diameters of 0.6 mm or 0.8 mm. QUICK REFERENCE DATA DESCRIPTION Ceramic Class VALUE 1 Ceramic Dielectric 2 Coating is made of blue colored flame retardant epoxy resin in accordance with UL 94 V-0. N750, Y5U Voltage (VDC) 4000 Min. Capacitance (pF) 10 33 Max. Capacitance (pF) 470 4700 Mounting The capacitors may be supplied with straight or kinked leads having a lead spacing of 10.0 mm or 12.5 mm. Radial CAPACITANCE RANGE 10 pF to 4.7 nF RATED VOLTAGE MARKING 4 kVDC Marking indicates, capacitance, tolerance code, and rated voltage. DIELECTRIC STRENGTH OPERATING TEMPERATURE RANGE -40 °C to +85 °C TEMPERATURE CHARACTERISTICS Class 1 N750 (U2J) Class 2 Y5U SECTIONAL SPECIFICATIONS Climatic category (according to EN 60068-1): 40/085/21 6000 VDC, 2 s INSULATION RESISTANCE AT 500 VDC 10 000 M (60 s) TOLERANCE ON CAPACITANCE ± 10 %, ± 20 % DISSIPATION FACTOR Class 1: -4 100 pF C < 30 pF: ------------------- + 0.7 x 10 max. 1 MHz C C 30 pF: max. 0.1 % (1 MHz) Class 2: Revision: 17-Sep-14 Component test max. 2.5 % (1 kHz) Document Number: 22154 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HDU, HDE Series www.vishay.com Vishay Draloric DIMENSIONS in millimeters Smax. 3.0 max. Dmax. V F 30 - 3 or 10 ± 1 Ø d ± 0.05 ORDERING INFORMATION CAPACITANCE (pF) TOLERANCE (%) BODY DIAMETER Dmax. (mm) BODY THICKNESS Smax. (mm) LEAD SPACING (1) F (mm) ± 1 mm LEAD DIAMETER (1) d (mm) ± 0.05 mm WIDTH (1) V (mm) ± 0.5 mm ORDERING CODE MISSING DIGITS SEE ORDERING CODE BELOW N750 (U2J) 10 HDU100KBD###KR 15 7.0 22 1.7 4.3 0.6 HDU220KBD###KR 33 HDU330KBD###KR 47 68 82 HDU150KBD###KR HDU470KBD###KR 9.5 ± 10 HDU680KBD###KR 10.0 HDU820KBD###KR 11.0 100 1.9 4.7 0.8 HDU101KBD###KR 150 13.0 220 15.0 HDU151KBD###KR HDU221KBD###KR 330 17.0 HDU331KBD###KR 470 20.0 HDU471KBD###KR Y5U (2E3) 33 1.9 4.5 47 68 HDE680#BD###KR 100 2.3 8.0 150 470 HDE101#BD###KR HDE151#BD###KR 0.6 220 330 HDE330#BD###KR HDE470#BD###KR HDE221#BD###KR ± 20 (2) 5.0 HDE331#BD###KR 12.5 2.5 HDE471#BD###KR 680 9.0 HDE681#BD###KR 1000 10.0 HDE102#BD###KR 1500 12.0 2200 13.0 3300 15.0 HDE332#BD###KR 4700 18.0 HDE472#BD###KR HDE152#BD###KR 0.8 2.7 HDE222#BD###KR Notes (1) Standard lead configuration, other lead spacing and diameter available on request (2) ± 10 % available on request Revision: 17-Sep-14 Document Number: 22154 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HDU, HDE Series www.vishay.com Vishay Draloric ORDERING CODE # 7th digit Capacitance tolerance ± 10 % = K, ± 20 % = M ### 10th to 12th digit Lead configuration see “General Information” Example HDE 100 M BD EF0 K R Series Capacitance value Tolerance code Voltage code Lead configuration Internal code RoHS compliant MARKING 47p M 4 kV E n47 K HDU 10 pF to 100 pF HDU 150 pF to 470 pF HDE 33 pF to 1.5 nF HDE 2.2 nF to 4.7 nF RELATED DOCUMENTS General Information Revision: 17-Sep-14 www.vishay.com/doc?22001 Document Number: 22154 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000