S Series Gap-Kap www.vishay.com Vishay BCcomponents Ceramic Singlelayer DC Disc Capacitors (Straight Leads) Gap-Kap, 1 kVDC to 3 kVDC FEATURES • High reliability • Straight leads • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Monitors • Color TV DESIGN QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 2 Ceramic Dielectric Voltage (VAC) Z5P, Z5U 1000 1500 Min. Capacitance (pF) 0.75 Max. Capacitance (pF) 22 000 Mounting Radial 3000 The capacitors consist of a ceramic disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.8 mm. The capacitors are supplied with straight leads and lead spacings from 5.0 mm to 10.0 mm. Encapsulation is phenolic resin coated, flammable resistant in accordance with “UL 94 V-0”. CAPACITANCE RANGE At 1 kHz, 1 VRMS ± 0.2 VRMS; 0.75 pF to 22 000 pF RATED DC VOLTAGE INTRODUCTION Vishay BCcomponents Gap-Kap capacitors provide a safe reliable discharge path for stray transient overvoltages and static voltage build-up. Combination of capacitor-spark-gap construction allows the circuit designer to specify lower voltage components and consequently lower cost, with assurance that overvoltage conditions will be prevented. The Gap-Kap capacitor is ideally suited for many industrial commercial equipment applications. A typical application in color TV monitors utilizes a minimum capacitance Gap-Kap which is inserted between the grid lead and chassis ground. This protects the components of control circuitry by providing a low impedance path to ground for transient voltages of 1500 V and above. 1 kV; 1.5 kV; 3 kV INSULATION RESISTANCE AT 500 VDC 10 000 M min. TOLERANCE ON CAPACITANCE ± 10 %; ± 20 % DISSIPATION FACTOR At 1 kHz, 1 VRMS ± 0.2 VRMS; 2.5 % max. MARKING Marking indicates capacitance value and tolerance in accordance with “EIA 198” and voltage marks. OPERATING TEMPERATURE RANGE - 30 °C to + 85 °C TEMPERATURE COEFFICIENTS EIA code Z5P or Z5U SECTIONAL SPECIFICATIONS Class 2, IEC 60384-9, EIA 198 Note • The capacitors meet the essential requirements of IEC 60384-9 and EIA 198. Unless stated otherwise all electrical values apply at an ambient temperature of 25 C ± 3 C, at normal atmospheric conditions. Revision: 19-Aug-13 Document Number: 28521 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 S Series Gap-Kap www.vishay.com Vishay BCcomponents ORDERING INFORMATION C (pF) TOL. (%) 0.75 max. VOLTAGE WORKING (kVDC) ARC (kVDC) 1.0 1.0 to 2.0 DMAX. (mm) TMAX. (mm) 11.0 5.0 1000 ± 20 1.5 2.0 to 3.0 11.0 4.5 CLEAR TEXT CODE LEAD SPACING S (mm) 16TH DIGIT: R = RoHS COMPLIANT 5.0 S758X43000183L5. 6.4 S758X43000183L6. 5.0 S102M43Z5P283L5. 6.4 S102M43Z5P283L6. 4700 ± 20 3.0 4.0 to 6.0 24.5 6.0 10.0 S472M96Z5P483L0. 10 000 ± 20 1.5 2.0 to 3.0 17.5 5.0 10.0 S103M69Z5U283L0. 22 000 ± 20 1.5 2.0 to 3.0 24.5 4.5 10.0 S223M96Z5U283L0. PACKAGING PACKAGING TYPE SIZE CODE LEAD SPACE (mm) VOLTAGE (VDC) SPQ BOX DIMENSIONS LxWxH (mm) 1000 20 to 47 Bulk (long lead L 25.4 mm) 1000 All All 1000 53 to 75 500 84 to 96 250 245 x 120 x 65 Note • The capacitors are supplied in bulk packaging (cardboard boxes). Revision: 19-Aug-13 Document Number: 28521 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000