HIK Series www.vishay.com Vishay Draloric High Voltage Ceramic Singlelayer DC Disc Capacitors, Class 2, Low Loss (0.5 %), 15 kVDC FEATURES • High capacitance in small sizes • Low losses • Wide range of different lead styles • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: • SMPS • DC and pulse high voltage • X-ray and laser equipment QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 2 Ceramic Dielectric Voltage (VDC) Y5T 15 000 Min. Capacitance (pF) 100 Max. Capacitance (pF) 1500 Mounting Radial MARKING Marking indicates, capacitance, tolerance code, and rated voltage. OPERATING TEMPERATURE RANGE -40 °C to +125 °C TEMPERATURE CHARACTERISTICS Y5T (2D3) SECTIONAL SPECIFICATIONS Climatic category (according to EN 60068-1): 40/125/21 DESIGN The capacitors consist of a ceramic disc which is silver plated on both sides. Connection leads are made of tinned copper having diameters of 0.8 mm. The capacitors may be supplied with straight or kinked leads having a lead spacing of 12.5 mm. Coating is made of blue colored flame retardant epoxy resin in accordance with UL 94 V-0. CAPACITANCE RANGE 100 pF to 1.2 nF RATED VOLTAGE 15 kVDC DIELECTRIC STRENGTH 22 500 VDC, 2 s Component test INSULATION RESISTANCE AT 500 VDC 100 000 M (60 s) TOLERANCE ON CAPACITANCE ± 20 % (± 10 % available on request) DISSIPATION FACTOR Max. 0.5 % (1 kHz) Revision: 22-May-15 Document Number: 22158 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HIK Series www.vishay.com Vishay Draloric DIMENSIONS in millimeters Smax. 3.0 max. Dmax. V F 30 - 3 or 10 ± 1 Ø d ± 0.05 ORDERING INFORMATION CAPACITANCE (pF) TOLERANCE (%) 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 BODY DIAMETER Dmax. (mm) BODY THICKNESS Smax. (mm) LEAD SPACING (1) F (mm) ± 1 mm LEAD DIAMETER (1) d (mm) ± 0.05 mm WIDTH (1) V (mm) ± 0.5 mm ORDERING CODE 8.0 5.0 9.0 8.0 10.0 11.0 11.5 13.0 ± 20 (2) 5.2 12.5 0.8 15.0 5.4 16.0 18.5 20.0 8.4 5.6 24.0 5.8 MISSING DIGITS SEE ORDERING CODE BELOW HIK101#BJ###KR HIK121#BJ###KR HIK151#BJ###KR HIK181#BJ###KR HIK221#BJ###KR HIK271#BJ###KR HIK331#BJ###KR HIK391#BJ###KR HIK471#BJ###KR HIK561#BJ###KR HIK681#BJ###KR HIK821#BJ###KR HIK102#BJ###KR HIK122#BJ###KR HIK152#BJ###KR Notes (1) Standard lead configuration, other lead spacing and diameter available on request (2) ± 10 % available on request ORDERING CODE # 7th digit ### 10th Example to 12th digit Capacitance tolerance ± 10 % = K, ± 20 % = M Lead configuration see “General Information” HIK 152 M BJ EH0 K R Series Capacitance value Tolerance code Voltage code Lead configuration Internal code RoHS compliant MARKING n10 K 15 kV E HIK 100 pF to 270 pF Revision: 22-May-15 n82 M HIK 330 pF to 1.5 nF Document Number: 22158 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HIK Series www.vishay.com Vishay Draloric ᐃC/C [%] CAPACITANCE CHANGE VS. VOLTAGE (Typical) 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 Y5T ΔC/C = f (UR) 0 10 20 30 40 50 60 70 80 90 100 UR [%] 20 50 10 40 0 30 Capacitance -10 -20 tan δ [x 10-3] ᐃC/C [%] CAPACITANCE CHANGE AND DISSIPATION FACTOR VS. TEMPERATURE (Typical) 20 10 tan δ -30 0 -40 -20 0 20 40 60 80 100 120 ϑA [°C] RELATED DOCUMENTS General Information Revision: 22-May-15 www.vishay.com/doc?22001 Document Number: 22158 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000