KSMD3710 KERSMI ELECTRONIC CO.,LTD. 100V N-channel MOSFET Description This N-channel MOSFETS use advanced trench technology and design to provide excellent RDS(on) with low gate charge. It can be used in a wide variety of applications. Features BVDSS 100V 1) 2) 3) 4) RDSON ID 42A 18MΩ Low gate charge. Green device available. Advanced high cell denity trench technology for ultra RDS(ON) Excellent package for good heat dissipation. TO-252 Absolute Maximum Ratings TC=25℃,unless otherwise noted Symbol Parameter Ratings Units VDS Drain-Source Voltage 100 VGS Gate-Source Voltage ±20 V V Continuous Drain Current-1 56 Continuous Drain Current-T=100℃ 39 Pulsed Drain Current2 42 EAS Single Pulse Avalanche Energy3 150 PD Power Dissipation4 140 TJ, TSTG Operating and Storage Junction Temperature Range -55 to +175 ℃ Ratings Units ID A mJ W Thermal Characteristics Symbol Parameter RƟJC Thermal Resistance ,Junction to Case1 1.05 RƟJA Thermal Resistance, Junction to Ambient1 110 www.kersemi.com ℃/W 1 KSMD3710 KERSMI ELECTRONIC CO.,LTD. 100V N-channel MOSFET Package Marking and Ordering Information Part NO. Marking Package IRFR3710 IRFR3710 TO-252 Electrical Characteristics TC=25℃ Symbol Parameter unless otherwise noted Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Sourtce Breakdown Voltage VDS=0V,ID=250μA 100 — — IDSS Zero Gate Voltage Drain Current VDS=0V, VDS=32V — — 20 IGSS Gate-Source Leakage Current VDS=±20V, VDS=0A — — ±100 v μA nA VDS=VDS, ID=250μA 2.0 — 4.0 V VDS=10V,ID=6A — 15 18 VDS=2.5V,ID=5A — — — VDS=5V,ID=12A 39 — — — 293 0 — — 290 — — 180 — — 14 — — 43 — — 53 — — 42 — On Characteristics VGS(th) GATE-Source Threshold Voltage RDS(ON) Drain-Source On Resistance² GFS Forward Transconductance mΩ S Dynamic Characteristics Ciss Input Capacitance VDS=15V,VGS=0V, f=1MHz Coss Output Capacitance Crss Reverse Transfer Capacitance pF Switching Characteristics — 69 100 Gate-SourceCharge VGS=4.5V, VDS=20V, — 15 — Gate-Drain “Miller” Charge ID=6A — 25 — ns ns ns ns nC nC nC — — 1.3 V — 35 53 ns — 41 62 nC td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge Qgs Qgd VDS=20V, VGS=10V,RGEN=3.3Ω Drain-Source Diode Characteristics VSD Source-Drain Diode ForwardVoltage² trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS=0V,IS =1A IF=7A,di/dt=100A/μS www.kersemi.com 2 KSMD3710 KERSMI ELECTRONIC CO.,LTD. 100V N-channel MOSFET Notes: 1. The data tested by surface mounted on a 1 inch²FR-4 board 2OZ copper. 2. The data tested by pulse width≤300us,duty cycle≤2% 3. The EAS data shows Max.rating.The test condition is VDD=25v,VGS=10V,L=0.1mH,iAS=17.8A 4. The power dissipation is limited by 150℃ junction temperature. Typical Characteristics TJ=25℃ unless otherwise noted Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig3.Typical Transfer Characteristics Fig4.ypical Forward Transconductance vs. Drain Current www.kersemi.com 3 KSMD3710 KERSMI ELECTRONIC CO.,LTD. 100V N-channel MOSFET Fig 5. Typical Capacitance vs. Drain-to-Source Voltage Fig 7. Typical Source-Drain Diode Forward Voltage Fig 6. Typical Gate Charge vs. Drain-to-Source Voltage Fig 8. Maximum Safe Operating Area Fig 9. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.kersemi.com 4