ACTS04MS TM Radiation Hardened Hex Inverter January 1996 tle TS S) ia- Features Pinouts • Devices QML Qualified in Accordance with MIL-PRF-38535 • Detailed Electrical and Screening Requirements are Contained in SMD# 5962-96712 and Intersil’s QM Plan 14 PIN CERAMIC DUAL-IN-LINE MIL-STD-1835 DESIGNATOR CDIP2-T14, LEAD FINISH C TOP VIEW A1 1 14 VCC Y1 2 13 A6 • Single Event Upset (SEU) Immunity: <1 x 10-10 Errors/Bit/Day (Typ) A2 3 12 Y6 Y2 4 11 A5 • SEU LET Threshold . . . . . . . . . . . . . . . . . . . . . . . >100 MEV-cm2/mg A3 5 10 Y5 • Dose Rate Upset . . . . . . . . . . . . . . . . >1011 RAD (Si)/s, 20ns Pulse Y3 6 9 A4 • Dose Rate Survivability . . . . . . . . . . . >1012 RAD (Si)/s, 20ns Pulse GND 7 8 Y4 • 1.25 Micron Radiation Hardened SOS CMOS • Total Dose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >300K RAD (Si) d- rte hor • Latch-Up Free Under Any Conditions • Military Temperature Range . . . . . . . . . . . . . . . . . . ds ria- -55oC to 14 PIN CERAMIC FLATPACK MIL-STD-1835 DESIGNATOR CDFP3-F14, LEAD FINISH C TOP VIEW +125oC • Significant Power Reduction Compared to ALSTTL Logic 1 14 VCC Y1 2 13 A6 A2 3 12 Y6 Y2 4 11 A5 A3 5 10 Y5 Y3 6 9 A4 GND 7 8 Y4 • Input Logic Levels - VIL = 0.8V Max - VIH = VCC/2 Min • Input Current ≤ 1µA at VOL, VOH d, A1 • DC Operating Voltage Range . . . . . . . . . . . . . . . . . . . . 4.5V to 5.5V • Fast Propagation Delay . . . . . . . . . . . . . . . . . 14ns (Max), 9ns (Typ) TRUTH TABLE Description The Intersil ACTS04MS is a Radiation Hardened Hex Inverter. d, L, l, s The ACTS04MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family. The ACTS04MS is supplied in a 14 lead Ceramic Flatpack (K suffix) or a Ceramic Dual-In-Line Package (D suffix). INPUTS OUTPUTS An Yn L H H L NOTE: L = Logic Level Low, H = Logic level High Functional Diagram An ic, S, , rte Yn Ordering Information PART NUMBER TEMPERATURE RANGE 5962F9671201VCC -55oC 5962F9671201VXC -55oC SCREENING LEVEL PACKAGE to +125oC MIL-PRF-38535 Class V 14 Lead SBDIP to +125oC MIL-PRF-38535 Class V 14 Lead Ceramic Flatpack ACTS04D/Sample o 25 C Sample 14 Lead SBDIP ACTS04K/Sample 25oC Sample 14 Lead Ceramic Flatpack ACTS04HMSR 25oC Die Die CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2001, All Rights Reserved 1 Spec Number File Number 518782 3383.1 ACTS04MS Die Characteristics DIE DIMENSIONS: 88 mils x 88 mils 2240mm x 2240mm METALLIZATION: Type: AlSi Metal 1 Thickness: 7.125kÅ ±1.125kÅ Metal 2 Thickness: 9kÅ ±1kÅ GLASSIVATION: Type: SiO2 Thickness: 8kÅ ±1kÅ WORST CASE CURRENT DENSITY: <2.0 x 105 A/cm 2 BOND PAD SIZE: 4.3 mils x 4.3 mils > 110µm x 110µm Metallization Mask Layout ACTS04MS Y1 (2) A1 (1) VCC (14) A6 (13) A2 (3) (12) Y6 Y2 (4) (11) A5 NC NC (10) Y5 A3 (5) (6) Y3 (8) Y4 (7) GND (9) A4 Spec Number 2 518782 ACTS04MS All Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation 7585 Irvine Center Drive Suite 100 Irvine, CA 92618 TEL: (949) 341-7000 FAX: (949) 341-7123 Intersil Corporation 2401 Palm Bay Rd. Palm Bay, FL 32905 TEL: (321) 724-7000 FAX: (321) 724-7946 EUROPE Intersil Europe Sarl Ave. C - F Ramuz 43 CH-1009 Pully Switzerland TEL: +41 21 7293637 FAX: +41 21 7293684 ASIA Intersil Corporation Unit 1804 18/F Guangdong Water Building 83 Austin Road TST, Kowloon Hong Kong TEL: +852 2723 6339 FAX: +852 2730 1433 Spec Number 3