CD4504BT Data Sheet July 1999 CMOS Hex Voltage Level Shifter for TTL-to-CMOS or CMOS-to-CMOS Operation File Number 4623.1 Features • QML Class T, Per MIL-PRF-38535 Intersil’s Satellite Applications FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of reliability. • Radiation Performance - Gamma Dose (γ) 1 x 105 RAD(Si) - SEP Effective LET > 75 MEV/gm/cm2 • Independence of Power Supply Sequence Considerations - VCC Can Exceed VDD - Input Signals can Exceed Both VCC and VDD CD4504BT Hex Voltage Level Shifter consists of six circuits which shift input signals from the VCC logic level to the VDD logic level. To shift TTL signals to CMOS logic levels, the SELECT input is at the VCC HIGH logic state. When the SELECT input is at a LOW logic state, each circuit translates signals from one CMOS level to another. • Up and Down Level Shifting Capability Specifications • Standardized Symmetrical Output Characteristics Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed below must be used when ordering. Pinouts • Shiftable Input Threshold for Either CMOS or TTL Compatibility • 100% Tested for Quiescent Current at 20V • 5V, 10V and 15V Parametric Ratings CD4504BT (SBDIP), CDIP2-T16 TOP VIEW Detailed Electrical Specifications for the CD4504BT are contained in SMD 5962-96665. A “hot-link” is provided from our website for downloading. www.intersil.com/spacedefense/newsafclasst.asp Intersil’s Quality Management Plan (QM Plan), listing all Class T screening operations, is also available on our website. www.intersil.com/quality/manuals.asp Ordering Information ORDERING NUMBER PART NUMBER TEMP. RANGE (oC) 5962R9666501TEC CD4504BDTR -55 to 125 5962R9666501TXC CD4504BKTR -55 to 125 NOTE: Minimum order quantity for -T is 150 units through distribution, or 450 units direct. 1 VCC 1 16 VDD AOUT 2 15 FOUT AIN 3 14 FIN BOUT 4 13 SELECT BIN 5 12 EOUT COUT 6 11 EIN CIN 7 10 DOUT VSS 8 9 DIN CD4504BT (FLATPACK), CDFP4-16 TOP VIEW VCC 1 16 VDD AOUT 2 15 FOUT AIN 3 14 FIN BOUT 4 13 SELECT BIN 5 12 EOUT COUT 6 11 EIN CIN 7 10 DOUT VSS 8 9 DIN CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999 Satellite Applications Flow™ (SAF) is a trademark of Intersil Corporation. CD4504BT Functional Diagram VCC VDD † IN (3, 5, 7, 9, 11, 14) † ALL INPUTS ARE PROTECTED BY CMOS PROTECTION NETWORK † SELECT VSS 2 13 TTL/CMOS MODE SELECT VDD LEVEL SHIFTER OUT (2, 4, 6, 10, 12, 15) VCC = PIN 1 VDD = PIN 16 VSS = PIN 8 CD4504BT Die Characteristics DIE DIMENSIONS: PASSIVATION: (2540µm x 1753µm x 533µm ±25.4µm) Type: Phosphorus Doped Silox (SiO2) 100 x 69 x 21mils ±1mil Thickness: 13.0kÅ ±2.6kÅ METALLIZATION: WORST CASE CURRENT DENSITY: < 2.0e5 A/cm2 Type: Al Thickness: 12.5kÅ ±1.5kÅ TRANSISTOR COUNT: SUBSTRATE POTENTIAL: 72 Leave Floating or Tie to VDD PROCESS: Bond Pad #16 (VDD) First Bulk CMOS BACKSIDE FINISH: Silicon Metallization Mask Layout CD4504BT 69mils 100mils All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 3 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029