www.osram.com Product Information LED STAR PAR16 35 36° Product Overview Product Wattage CCT lm Base LED STAR PAR16 35 36°827 3,9 2700 230 GU10 LED STAR PAR16 35 36°840 3,9 4000 230 GU10 Benefits Key Features • • • • • • 3,9 W LED lamps as high-quality replacement for a 35W halogene spot lamp • GU10 base for easy replacement • Available in 2700K warm white and 4000K cool white color temperature • Energy efficiency class A+ • 15,000 hours lifetime³ • Similar dimensions as incandescent candle lamp • UV and NIR radiation free • Mercury free • 3 years Osram Guarantee (www.osram.com/guarantee) • Suitable for most commercially available conventional transformers For all household luminaires Low energy consumption and maintenance costs Long lifetime up to 15 years² Compact 220-240V-LED reflector lamp in PAR16 shape Equipped with high-efficiency patented LEDs, quality assured • Shockproof and vibration-proof Product Wattage CCT lm Base Diameter Lenght Weight Beam Angle EAN10 LED STAR PAR16 35 36° 3,9 W 2700 K 230 GU10 50 mm 58 mm 69 g 36° 4052899910348 EAN40 (ship.unit) 4052899910447 LED STAR PAR16 35 36° 3,9 W 4000 K 230 GU10 50 mm 58 mm 69 g 36° 4052899928954 4052899928992 Ship. unit 6 6 ¹With many common dimmers, see also www.osram.com/dim 2 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 3 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical identica lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), C), free air burning, base up burning position and at rated voltage. LEDSTAR PAR16 35 36°827 & 840 BU LP PPM LED Lamps 1 www.osram.com Product Information LED STAR PAR16 35 36° Common Characteristics3 Average lifetime4 Switching cycles Casing material Starting time Warm up time for 60% light Power factor 15,000 hrs 100,000 Plastic < 0,5 s <1s 0,56 Nominal current Max. inrush current Tc temperature CRI Mercury max. Luminous intensity 31 mA - 79 °C ≥80 0.0 mg 630 cd (30s on, 30s off) Tc Good heat exchange supports ideal performance Disposal information • Lamps with WEEE sign can be returned at specific collection points. • LED lamps have to be disposed as special waste. 3 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical identica lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), C), free air burning, base up burning position and at rated voltage. 5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated indicat position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01) 2009 LEDSTAR PAR16 35 36°827 & 840 BU LP PPM LED Lamps 2 www.osram.com Product Information LED STAR PAR16 35 36° Application information • • • • • Suitable for indoor application. For outdoor applications and operation in damp locations special approved fixture are required. Input voltage: 220-240 V Storage temperature & humidity conditions (-20°C u p to +40°C, C, at max. 95% relative humidity) Operating temperature & humidity conditions (-20°C up to +40 40°C, at max. 95% relative humidity) Lamp conformity • • • • • • • • • • • 2004/108/EC Electromagnetic compatibility (EMC) 244/2009 Ecodesign requirements for non-directional directional household lamps IEC/ PAS 62612 Self ballasted LED-lamps lamps for general lighting services – Performance requirements 2009/125/EC Ecodesign requirements for energy related products 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) ( 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems EN 55015 Limits and methods of measurement of radio disturance EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low voltage supply systems • EN61547 Electromagnetic compatibility immunity requirements • 1194/2012 Eco design requirement for directional lamps, light emitting diode lamps and related equipment (DIM II) • IEC 62560 self-ballasted LED-lamps lamps for general lighting services by voltage >50V – Safety specifications • 874/2012/EU Energy labeling of electrical lamps and luminaires LEDSTAR PAR16 35 36°827 & 840 BU LP PPM LED Lamps 3