www.osram.com Product Information LED STAR CLASSIC P25 advanced frosted & clear sparkling Key Features Benefits • 4W LED lamp as high-quality replacement for a 25W incandescent lamp • Clear version with unique OSRAM patented optics • Designed in Germany • Available in 2700K warm white and 4000K cool white color temperature • 15,000 hours lifetime1 • Similar dimensions as incandescent lamp • UV and NIR radiation free • Mercury free • For all household luminaires • Low energy consumption and maintenance costs • GLS inspired Design • Same size as non dimmable version •True 25W incandescent replacement Product Wattage CCT lm Base Diameter Length Weight EAN10 Ship. unit LED STAR CLASSIC P25 frosted E14 4 2700 250 E14 43 mm 82mm 50 g 4052899232730 10 LED STAR CLASSIC P25 frosted E27 4 2700 250 E27 43 mm 80mm 57 g 4052899232754 10 LED STAR CLASSIC P25 clear sparkling E14 4 2700 250 E14 43mm 82mm 52 g 4052899232693 10 LED STAR CLASSIC P25 clear sparkling E27 4 2700 250 E27 43mm 80mm 59 g 4052899232716 10 LED STAR CLASSIC P25 frosted E14 4 4000 250 E14 43mm 82mm 52g 4052899232792 10 ¹With many common dimmers, see also www.osram.com/dim 2 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 3 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage. LEDSTAR CLASSIC P25 BU LP PPM Led Lamps For internal use only 1 www.osram.com Product Information LED STAR CLASSIC P25 frosted & clear sparkling Common Characteristics3 Average lifetime4 Switching cycles Casing material Starting time Warm up time for 60% light Power factor 0.6 (30s on, 30s off) 15,000 hrs 100,000 Plastic <0,2 s 0.0 s Lamp current Max. inrush current Tc temperature max.5 CRI Mercury max. 29 mA 2A 88°C 80 0.0 mg Disposal information • Lamps with WEEE sign can be returned at specific collection points. • LED lamps have to be disposed as special waste. 3 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage. 5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01) LEDSTAR CLASSIC P25 BU LP PPM Led Lamps For internal use only 2 www.osram.com Product Information LED STAR CLASSIC P25 frosted & clear sparkling Application information • • • • • Suitable for indoor application. For outdoor applications and operation in damp locations special approved fixture are required. Input voltage: 220-240V Storage temperature & humidity conditions (-20°C up to +40°C, at max. 95% relative humidity) Operating temperature & humidity conditions (-20°C up to +40°C, at max. 95% relative humidity) Lamp conformity • • • • • • • • • • • 2004/108/EC Electromagnetic compatibility (EMC) 244/2009 Ecodesign requirements for non-directional household lamps IEC/ PAS 62612 Self ballasted LED-lamps for general lighting services – Performance requirements 2009/125/EC Ecodesign requirements for energy related products 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems EN 55015 Limits and methods of measurement of radio disturance EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low voltage supply systems • EN61547 Electromagnetic compatibility immunity requirements • 1194/2012 Eco design requirement for directional lamps, light emitting diode lamps and related equipment (DIM II) • IEC 62560 self-ballasted LED-lamps for general lighting services by voltage >50V – Safety specifications • 874/2012/EU Energy labeling of electrical lamps and luminaires LEDSTAR CLASSIC P25 BU LP PPM Led Lamps For internal use only 3