pdf

www.osram.com
Product Information
LEDSTAR® CLASSIC B/BA25 frosted & clear sparkling
Benefits
Key Features
• Replacement for 25W Incandescent lamp
• Dimension comparable Classic B Incandescent
• Good thermal management
• 3.3W LED lamp as high-quality replacement for a 25W
incandescent candle lamp
• Non Dimmable
• E14 base
• Available in 2700K warm white
• 15,000 hrs
• UV and IR radiation free
• Mercury free
Product
SCLB25 3.3W/827 220240VCSE1410X1APOSRA
M
SCLB25 3.3W/827 220240VFRE1410X1APOSRA
M
SCLBA25 3.3W/827220240CSE1410X1APOSRAM
Wattage
CCT
lm
Base Diameter
Length
Weight
Viewing
Angle
EAN10
EAN40
(ship.unit)
Ship.
unit
3.3
2700
250
E14
35 mm
100 mm
30 g
216°
4052899252684
4052899252691
10
3.3
2700
250
E14
35 mm
100 mm
26 g
216°
4052899252707
4052899252714
10
3.3
2700
250
E14
35 mm
114mm
34 g
216°
4052899252103
4052899252110
10
¹With many common dimmers, see also www.osram.com/dim
2
Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the
technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary
from the typical values.
3 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux
(L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage.
LEDSTAR CLASSIC B Clear Sparkling &
Frosted
BU LLS PPM Led Lamps
For internal use only
1
www.osram.com
Product Information
LEDSTAR® CLASSIC B/BA25 frosted & clear sparkling
Common Characteristics3
Average lifetime4
Switching cycles
Casing material
Starting time
Warm up time for
95% light
Power factor
15,000 hrs
(30s on, 30s off)
100,000
Plastic
<0.5s
0.2 s
0.45
Lamp Current
Irush current
Tc temperature
max.5
CRI
Mercury max.
32 mA
18A
85°C CL/99.5°C
FR
80
0.0 mg
TC
Disposal information
• Lamps with WEEE sign can be returned at specific collection points.
• LED lamps have to be disposed as special waste.
3
Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the
technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary
from the typical values.
4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux
(L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage.
5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at
the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01)
LEDSTAR CLASSIC B Frosted & Clear
Sparkling
BU LLS PPM Led Lamps
For internal use only
2
www.osram.com
Product Information
LEDSTAR® CLASSIC B/BA25 frosted & clear sparkling
Application information
•
•
•
•
•
Suitable for indoor application.
For outdoor applications and operation in damp locations special approved fixture are required.
Input voltage: 220-240V
Storage temperature & humidity conditions (-20°C up to +40°C, at max. 95% relative humidity)
Operating temperature & humidity conditions (-20°C up to +40°C, at max. 95% relative humidity)
Lamp conformity
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IEC 60630 Max. outline of incandescent lamps
IEC 62612 Self ballasted LED-lamps for GL services
GB/T 24908-2010
EN 62560 Self ballasted LED lamps for GL services
GB 24906-2010
IEC 60061 Lamp caps and holders
EN 62471 Photo biological safety of lamps
EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar
equipment
2004/108/EC Electromagnetic compatibility
EN 61547 EMC immunity requirements
2009/125/EC Ecodesign requirements for energy-related products
2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)
1907/2006 Registration, Evaluation, Authorization and Restriction of Chemicals (REACH Regulation)
2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE)
LEDSTAR CLASSICB25 Frosted & Clear
Sparkling
BU LLS PPM Led Lamps
For internal use only
3