Product Brief 1EDI EiceDRIVER™ Compact 1200 V galvanically isolated single-channel driver IC family Our new 1EDI EiceDRIVER™ Compact family complements our extensive range of highvoltage driver ICs for a market that demands easy-to-use drivers with a small footprint for quick design-in cycles. The driver family is based on Infineon’s coreless transformer technology, enabling a benchmark setting minimum common mode transient immunity (CMTI) of 100 kV/μs. The drivers provide output currents of up to 6 A on separate output pins for applications up to 1200 V. They are ideal for the use in industrial drives, charge stations for electric vehicles, power supplies for servers and telecommunications systems, and welding equipment. Six versions are available with separate source and sink outputs for MOSFET and IGBT switches. The MOSFET drivers are optimized for designs using CoolMOS™ technology. Due to lower inductive losses, these drivers enable an additional gain in efficiency of 0.5 percent with the latest generation of CoolMOS™ C7. Three IGBT-only versions are designed to limit the gate voltage using an active Miller clamp. The 1EDI60N12AF and 1EDI20N12AF for MOSFETs supply 2 and 6 A of output current on separate output pins for gate charging and discharging purposes. A propagation delay mismatch trimmed down to less than 10 ns and an input filter time of only 40 ns are ideal for high switching frequency applications of up to 4 MHz such as switched mode power supplies. The 1EDI05I12AF, 1EDI20I12AF, 1EDI40I12AF, and 1EDI60I12AF for IGBTs provide output currents between 0.5 and 6 A. The 1EDI30I12MF, 1EDI20I12MF, and 1EDI10I12MF with Miller clamp deliver output currents of 1, 2, and 3 A, respectively. All variants are offered in a compact, halogen-free 150 mil DSO-8 package. www.infineon.com/eicedriver-compact Key features ››Single channel isolated driver ››Input to output isolation voltage up to 1200 V ››For high voltage power MOSFETs and IGBTs ››Up to 6 A minimum peak rail-to-rail output ››Separate source and sink outputs or active Miller clamp Applications MOSFET: ››Switched mode power supplies ››PFC stages ››Servers ››Solar systems ››Buck/boost converters IGBT: ››General-purpose inverters (GPI) ››Drives ››Welding equipment ››IH industrial and cooking appliances ››Solar inverters ››Uninterruptible power supplies Product Brief 1EDI EiceDRIVER™ Compact 1200 V galvanically isolated single-channel driver IC family Variant with separate source/sink output Circuit diagram for IGBT VCC 1 VCC 2 VCC 1 OUT + SGND IN+ OUT - IN IN- GND 2 SGND IN Variant with output and active miller clamp Circuit diagram for IGBT, unipolar (e.g. with TRENCHSTOPTM 5) GND 1 VCC 2 OUT GND 1 IN+ CLAMP IN- GND 2 Detailed product features: Sales Code 1EDI60N12AF Package Applications 1EDI60I12AF 1EDI40I12AF 1EDI20I12AF 1EDI05I12AF 1EDI30I12MF 1EDI20I12MF 1EDI10I12MF DSO-8 (150mil) DSO-8 (150mil) SMPS, PFC, telecom, server, solar, buck/boost converter, PC power General-purpose inverter (GPI), drives (general purpose & servo), welding, IH industrial and cooking, solar inverter, UPS General purpose inverter (GPI), industrial drives, welding, IH industrial, solar inverter, UPS Voltage class Output current 1EDI20N12AF DSO-8 (150mil) up to 1200 V up to 1200 V up to 1200 V 6 A / -6 A 2 A / -2 A 6 A / -6 A 4 A / -4 A 2 A / -2 A 0.5 A / -0.5 A 3 A / -3 A 2 A / -2 A 1 A / -1 A Separate source/ sink output ✓ ✓ ✓ ✓ ✓ ✓ – – – Active Miller clamp – – – – – – ✓ ✓ ✓ UVLO MOSFET IGBT Propagation delay 120 ns 120 ns Max. switching frequency 4 MHz 4 MHz Recommendation *) CoolMOS™ C7 , CP **) *) IGBT 300ns 1 MHz *) All 650V and 1200V IGBT modules 300ns 1 MHz *) All 650V and 1200V IGBT modules Common highlights: ››Common Mode Transient Immunity (CMTI): 100 kV/µs (best in class) ››Wide input operation range (3 .. 17 V) ››Benefit: no voltage/signal adaptation between µC and driver necessary *) do not exceed max. power dissipation 1EDI60N12AF enables an extra 0.5 % efficiency gain by reducing inductance losses **) Published by Infineon Technologies AG 85579 Neubiberg, Germany © 2016 Infineon Technologies AG. All Rights Reserved. Please note! THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE. WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED APPLICATION. WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR THE INFORMATION GIVEN HEREIN AT ANY TIME. Order Number: B114-H9859-V3-7600-EU-EC-P Date: 05 / 2016 Additional information For further information on technologies, our products, the application of our products, delivery terms and conditions and/or prices, please contact your nearest Infineon Technologies office (www.infineon.com). Warnings Due to technical requirements, our products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by us in a written document signed by authorized representatives of Infineon Technologies, our products may not be used in any lifeendangering applications, including but not limited to medical, nuclear, military, life-critical or any other applications where a failure of the product or any consequences of the use thereof can result in personal injury.